Jump to content

Lane–Emden equation: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Oub (talk | contribs)
Numerical Solutions: boundary conditions are initial conditions
Oub (talk | contribs)
Line 138: Line 138:
: <math> \frac{d\phi}{d\xi}=\theta^n\xi^2 </math>
: <math> \frac{d\phi}{d\xi}=\theta^n\xi^2 </math>


Here, <math>\phi(\xi)</math> is interpreted as the dimensionless mass, defined by <math>m(r)=4\pi\alpha^3\rho_c\phi(\xi)</math>. The relevant initial conditions are <math>\phi(0)=0</math> and <math>\theta(0)=1</math>. The first equation represents hydrostatic equilibrium and the second mass conservation.
Here, <math>\phi(\xi)</math> is interpreted as the dimensionless mass, defined by <math>m(r)=4\pi\alpha^3\rho_c\phi(\xi)</math>. The relevant initial conditions are <math>\phi(0)=0</math> and <math>\theta(0)=1</math>. The first equation represents the hydrostatic equilibrium and the second the mass conservation.


== Homologous Variables ==
== Homologous Variables ==

Revision as of 16:57, 12 July 2014

Solutions of Lane–Emden equation for n = 0, 1, 2, 3, 4, 5.

In astrophysics, the Lane–Emden equation is a dimensionless form of Poisson's equation for the gravitational potential of a Newtonian self-gravitating, spherically symmetric, polytropic fluid. It is named after astrophysicists Jonathan Homer Lane and Robert Emden.[1] The equation reads

where is a dimensionless radius and is related to the density (and thus the pressure) by for central density . The index is the polytropic index that appears in the polytropic equation of state,

where and are the pressure and density, respectively, and is a constant of proportionality. The standard boundary conditions are and . Solutions thus describe the run of pressure and density with radius and are known as polytropes of index .

Applications

Physically, hydrostatic equilibrium connects the gradient of the potential, the density, and the gradient of the pressure, whereas Poisson's equation connects the potential with the density. Thus, if we have a further equation that dictates how the pressure and density vary with respect to one another, we can reach a solution. The particular choice of a polytropic gas as given above makes the mathematical statement of the problem particularly succinct and leads to the Lane–Emden equation. The equation is a useful approximation for self-gravitating spheres of plasma such as stars, but typically it is a rather limiting assumption.

Derivation

From hydrostatic equilibrium

Consider a self-gravitating, spherically symmetric fluid in hydrostatic equilibrium. Mass is conserved and thus described by the continuity equation

where is a function of . The equation of hydrostatic equilibrium is

where is also a function of . Differentiating again gives

where we have used the continuity equation to replace the mass gradient. Multiplying both sides by and collecting the derivatives of on the left, we can write

Dividing both sides by yields, in some sense, a dimensional form of the desired equation. If, in addition, we substitute for the polytropic equation of state with and , we have

Gathering the constants and substituting , where

,

we have the Lane–Emden equation,

From Poisson's equation

Equivalently, one can start with Poisson's equation,

We can replace the gradient of the potential using the hydrostatic equilibrium, via

which again yields the dimensional form of the Lane–Emden equation.

Solutions

For a given value of the polytropic index , denote the solution to the Lane–Emden equation as . In general, the Lane–Emden equation must be solved numerically to find . There are exact, analytic solutions for certain values of , in particular: . Additionally, there is an analytic expression for which is infinite in extent, and thus not physically realizable. For values of between 0 and 5, the solutions are continuous and finite in extent---where the radius of the star is given by, , such that, .

For a given solution , the density profile is given by,

The total mass of the model star can be found by integrating the density over radius, from 0 to .

The pressure can be found using the polytropic equation of state, , i.e.

Finally, the temperature profile can be found using the ideal gas law, , where is the Boltzmann constant and is the mean particle mass.

Exact Solutions

There are only three values of the polytropic index that lead to exact solutions.

n = 0

If , the equation becomes

Re-arranging and integrating once gives

Dividing both sides by and integrating again gives

The boundary conditions and imply that the constants of integration are and .

n = 1

When , the equation can be expanded in the form

We assume a power series solution:

This leads to a recursive relationship for the expansion coefficients:

This relation can be solved leading to the general solution:

The boundary condition for a physical polytrope demands that as . This requires that , thus leading to the solution:

n = 5

After a sequence of substitutions, it can be shown that the Lane–Emden equation has a further solution

when . This solution is infinite in radial extent.

Numerical Solutions

In general, solutions are found by numerical integration. Many standard methods require that the problem is formulated as a system of first-order ordinary differential equations. For example,

Here, is interpreted as the dimensionless mass, defined by . The relevant initial conditions are and . The first equation represents the hydrostatic equilibrium and the second the mass conservation.

Homologous Variables

Homology-invariant equation

It is known that if is a solution of the Lane–Emden equation, then so is .[2] Solutions that are related in this way are called homologous; the process that transforms them is homology. If we choose variables that are invariant to homology, then we can reduce the order of the Lane–Emden equation by one.

A variety of such variables exist. A suitable choice is

and

We can differentiate the logarithms of these variables with respect to , which gives

and

.

Finally, we can divide these two equations to eliminate the dependence on , which leaves

This is now a single first-order equation.

Topology of the homology-invariant equation

The homology-invariant equation can be regarded as the autonomous pair of equations

and

.

The behaviour of solutions to these equations can be determined by linear stability analysis. The critical points of the equation (where ) and the eigenvalues and eigenvectors of the Jacobian matrix are tabulated below.[3]

Critical point Eigenvalues Eigenvectors

Further reading

Horedt, Georg P. (2004). Polytropes - Applications in Astrophysics and Related Fields. Dordrecht: Kluwer Academic Publishers. ISBN 978-1-4020-2350-7.

References

  1. ^ Lane, Jonathan Homer (1870). "On the Theoretical Temperature of the Sun under the Hypothesis of a Gaseous Mass Maintaining its Volume by its Internal Heat and Depending on the Laws of Gases Known to Terrestrial Experiment". The American Journal of Science and Arts. 2. 50: 57–74.
  2. ^ Chandrasekhar, Subrahmanyan (1939). An introduction to the study of stellar structure. Chicago, Ill.: University of Chicago Press.
  3. ^ Horedt, Georg P. (1987). "Topology of the Lane-Emden equation". Astronomy and Astrophysics. 117 (1–2): 117–130. Bibcode:1987A&A...177..117H.