Jump to content

EMD RS1325: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
added text re: appearance in leiu of a photo. ~~~~
Line 21: Line 21:
The '''RS1325''' was a North American locomotive model built by [[General Motors Electro-Motive Division]], having characteristics of both a [[Switching locomotive|switcher]] and a [[roadswitcher]]. Only two units were built.
The '''RS1325''' was a North American locomotive model built by [[General Motors Electro-Motive Division]], having characteristics of both a [[Switching locomotive|switcher]] and a [[roadswitcher]]. Only two units were built.


In 1960, EMD built a pair of light roadswitchers, consisting of switcher carbodies and mechanicals on longer roadswitcher frames. These were given the designation of ''RS1325'', ''RS'' denoting a roadswitcher not part of a specific series, and ''1325'' denoting the unit’s horsepower. The RS1325’s were 4-axle, B-B diesels constructed by GM-EMD in September 1960. They had, similarly to the [[EMD NW5|NW5]] switchers, a short hood to contain auxiliaries and a [[Steam generator (railroad)|steam generator]] for passenger equipment, as they were originally intended for passenger switching in Chicago. Despite these capabilities, these two units have only hauled freight for their entire lives, as the market for passenger switchers was drying up.
In 1960, EMD built a pair of light roadswitchers, consisting of switcher carbodies and mechanicals on longer roadswitcher frames. These were given the designation of ''RS1325'', ''RS'' denoting a roadswitcher not part of a specific series, and ''1325'' denoting the unit’s horsepower. The RS1325’s were 4-axle, B-B diesels constructed by GM-EMD in September 1960. The cab and forward is styled similarly to the [[EMD GP20|GP20]] with with a long sloping hood and the standard rounded top cab of the time. The long hood is low and more representative of a true switcher body. They had, similarly to the [[EMD NW5|NW5]] switchers, a short hood to contain auxiliaries and a [[Steam generator (railroad)|steam generator]] for passenger equipment, as they were originally intended for passenger switching in Chicago. Despite these capabilities, these two units have only hauled freight for their entire lives, as the market for passenger switchers was drying up.


Only two units of this type were produced in total, serial numbers #25773 and #25774. They made up order #4438, placed by the [[Chicago and Illinois Midland Railway]], and they were given the numbers #30 and #31 in service. A green paint scheme with a thin red stripe adorned them until the C&IM was renamed as the Illinois & Midland Railroad when they were bought by [[Genesee & Wyoming Inc.]] and added to the G&M’s ever-increasing roster of [[Shortline railroad|shortlines]]. As of 2011, both units remain in active use on the I&M with the same numbers.
Only two units of this type were produced in total, serial numbers #25773 and #25774. They made up order #4438, placed by the [[Chicago and Illinois Midland Railway]], and they were given the numbers #30 and #31 in service. A green paint scheme with a thin red stripe adorned them until the C&IM was renamed as the Illinois & Midland Railroad when they were bought by [[Genesee & Wyoming Inc.]] and added to the G&M’s ever-increasing roster of [[Shortline railroad|shortlines]]. As of 2011, both units remain in active use on the I&M with the same numbers.

Revision as of 17:45, 28 August 2014

EMD RS1325
Type and origin
Power typeDiesel-electric
BuilderElectro-Motive Division
Total produced2
Specifications
Configuration:
 • AARB-B
Gauge4 ft 8+12 in (1,435 mm)
TrucksFlexicoil
Wheel diameter40 in (1.016 m)
Length52 ft 2 in (15.90 m)
Width10 ft 6+78 in (3.22 m)
Height14 ft 7 in (4.45 m)
Loco weight125 short tons (113 t)
Fuel capacity600 US gallons (2,300 L; 500 imp gal)
Prime moverEMD 567D
CylindersV12
Performance figures
Power output1,325 hp (0.988 MW)

The RS1325 was a North American locomotive model built by General Motors Electro-Motive Division, having characteristics of both a switcher and a roadswitcher. Only two units were built.

In 1960, EMD built a pair of light roadswitchers, consisting of switcher carbodies and mechanicals on longer roadswitcher frames. These were given the designation of RS1325, RS denoting a roadswitcher not part of a specific series, and 1325 denoting the unit’s horsepower. The RS1325’s were 4-axle, B-B diesels constructed by GM-EMD in September 1960. The cab and forward is styled similarly to the GP20 with with a long sloping hood and the standard rounded top cab of the time. The long hood is low and more representative of a true switcher body. They had, similarly to the NW5 switchers, a short hood to contain auxiliaries and a steam generator for passenger equipment, as they were originally intended for passenger switching in Chicago. Despite these capabilities, these two units have only hauled freight for their entire lives, as the market for passenger switchers was drying up.

Only two units of this type were produced in total, serial numbers #25773 and #25774. They made up order #4438, placed by the Chicago and Illinois Midland Railway, and they were given the numbers #30 and #31 in service. A green paint scheme with a thin red stripe adorned them until the C&IM was renamed as the Illinois & Midland Railroad when they were bought by Genesee & Wyoming Inc. and added to the G&M’s ever-increasing roster of shortlines. As of 2011, both units remain in active use on the I&M with the same numbers.

See also

References

  • "EMD NW3, NW4, NW5, RS1325 Order Numbers". The UNofficial EMD Homepage. Retrieved 2008-05-29.
  • Hayden, Bob (1980). Model Railroader Cyclopedia Volume 2 Diesel Locomotives. Milwaukee, Wisconsin: Kalmbach Publishing Company. ISBN 0-89024-547-9.