Jump to content

Automation: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
m Reverted edits by Ahsanum (talk) to last version by 86.12.135.4
Line 155: Line 155:
== Advantages and disadvantages ==
== Advantages and disadvantages ==


{{procon|date=November 2012}}


The main advantages of automation are:
The main advantages of automation are:

Revision as of 00:12, 19 November 2014

Automation or automatic control, is the use of various control systems for operating equipment such as machinery, processes in factories, boilers and heat treating ovens, switching in telephone networks, steering and stabilization of ships, aircraft and other applications with minimal or reduced human intervention. Some processes have been completely automated.

The biggest benefit of automation is that it saves labor, however, it is also used to save energy and materials and to improve quality, accuracy and precision.

The term automation, inspired by the earlier word automatic (coming from automaton), was not widely used before 1947, when General Motors established the automation department.[1] It was during this time that industry was rapidly adopting feedback controllers, which were introduced in the 1930s.[2]

Automation has been achieved by various means including mechanical, hydraulic, pneumatic, electrical, electronic and computers, usually in combination. Complicated systems, such as modern factories, airplanes and ships typically use all these combined techniques.

Types of automation

One of the simplest types of control is on-off control. An example is the thermostats used on household appliances. Although technically it is a form of automation, its capabilities are primitive. (Old style HVAC systems used crude thermostats that were limited to on-off control, but some modern systems use more sophisticated sensors and digital controllers for variable speed fans or controlling other functions.)

Sequence control, in which a programmed sequence of discrete operations is performed, often based on system logic that involves system states. An elevator control system is an example of sequence control.

The advanced type of automation that revolutionized manufacturing, aircraft, communications and other industries, is feedback control, which is usually continuous and involves taking measurements using a sensor and making calculated adjustments to keep the measured variable within a set range. (See also: Continuous production.)

Open and closed loop

All the elements constituting the measurement and control of a single variable are called a control loop. Control that uses a measured signal, feeds the signal back and compares it to a set point, calculates and sends a return signal to make a correction, is called closed loop control. If the controller does not incorporate feedback to make a correction then it is open loop. An operator monitoring signals from various sensors and manually making corrections either physically, such as turning the handle on a valve, or remotely, such as using a dial on a control panel, is performing open loop control. Timers and sequence controllers using logic, such as those on an elevator, are also open loop.

Feedback control

Feedback control is accomplished with a controller. To function properly, a controller must provide correction in a manner that maintains stability. The theoretical basis of feedback control is control theory, which also covers servomechanisms, which are often part of an automated system.

Maintaining stability is a principal objective of control theory. Stability means that the system should not oscillate excessively around the set point or get into a situation where it shuts down or runs away.

As an example of feedback control, consider a steam coil air heater in which a temperature sensor measures the temperature of the heated air, which is the measured variable. This signal is constantly "fed back" to the controller, which compares it to the desired setting (set point). The controller calculates the difference (error), then calculates a correction and sends the correction signal to adjust the air pressure to a diaphragm that moves a positioner on the steam valve, opening or closing it by the calculated amount.

The complexities of this are that the quantities involved are all of different physical types; the temperature sensor signal may be electrical or pressure from an enclosed fluid, the controller may employ pneumatic, hydraulic, mechanical or electronic techniques to sense the error and send a signal to adjust the air pressure that moves the valve.

The first controllers used analog methods to perform their calculations. Analog methods were also used in solving differential equations of control theory. The electronic analog computer was developed to solve control type problems and electronic analog controllers were also developed.[3] Analog computers were displaced by digital computers when they became widely available.

Common applications of feedback control are control of temperature, pressure, flow, and speed.

Sequential control and logical sequence or system state control

Sequential control may be either to a fixed sequence or to a logical one that will perform different actions depending on various system states. An example of an adjustable but otherwise fixed sequence is a timer on a lawn sprinkler.

States refer to the various conditions that can occur in a use or sequence scenario of the system. An example is an elevator, which uses logic based on the system state to perform certain actions in response to its state and operator input. For example, if the operator presses the floor n button, the system will respond depending on whether the elevator is stopped or moving, going up or down, or if the door is open or closed, and other conditions.

An early development of sequential control was relay logic, by which electrical relays engage electrical contacts which either start or interrupt power to a device. Relays were first used in telegraph networks before being developed for controlling other devices, such as when starting and stopping industrial-sized electric motors or opening and closing solenoid valves. Using relays for control purposes allowed event-driven control, where actions could be triggered out of sequence, in response to external events. These were more flexible in their response than the rigid single-sequence cam timers. More complicated examples involved maintaining safe sequences for devices such as swing bridge controls, where a lock bolt needed to be disengaged before the bridge could be moved, and the lock bolt could not be released until the safety gates had already been closed.

The total number of relays, cam timers and drum sequencers can number into the hundreds or even thousands in some factories. Early programming techniques and languages were needed to make such systems manageable, one of the first being ladder logic, where diagrams of the interconnected relays resembled the rungs of a ladder. Special computers called programmable logic controllers were later designed to replace these collections of hardware with a single, more easily re-programmed unit.

In a typical hard wired motor start and stop circuit (called a control circuit) a motor is started by pushing a "Start" or "Run" button that activates a pair of electrical relays. The "lock-in" relay locks in contacts that keep the control circuit energized when the push button is released. (The start button is a normally open contact and the stop button is normally closed contact.) Another relay energizes a switch that powers the device that throws the motor starter switch (three sets of contacts for three phase industrial power) in the main power circuit. (Note: Large motors use high voltage and experience high in-rush current, making speed important in making and breaking contact. This can be dangerous for personnel and property with manual switches.) All contacts are held engaged by their respective electromagnets until a "stop" or "off" button is pressed, which de-energizes the lock in relay. See diagram: Motor Starters Hand-Off-Auto With Start-Stop (Note: The above description is the "Auto" position case in this diagram).

Commonly interlocks are added to a control circuit. Suppose that the motor in the example is powering machinery that has a critical need for lubrication. In this case an interlock could be added to insure that the oil pump is running before the motor starts. Timers, limit switches and electric eyes are other common elements in control circuits.

Solenoid valves are widely used on compressed air or hydraulic fluid for powering actuators on mechanical components. While motors are used to supply continuous rotary motion, actuators are typically a better choice for intermittently creating a limited range of movement for a mechanical component, such as moving various mechanical arms, opening or closing valves, raising heavy press rolls, applying pressure to presses.

Computer control

Computers can perform both sequential control and feedback control, and typically a single computer will do both in an industrial application. Programmable logic controllers (PLCs) are a type of special purpose microprocessor that replaced many hardware components such as timers and drum sequencers used in relay logic type systems. General purpose process control computers have increasingly replaced stand alone controllers, with a single computer able to perform the operations of hundreds of controllers. Process control computers can process data from a network of PLCs, instruments and controllers in order to implement typical (such as PID) control of many individual variables or, in some cases, to implement complex control algorithms using multiple inputs and mathematical manipulations. They can also analyze data and create real time graphical displays for operators and run reports for operators, engineers and management.

Control of an automated teller machine (ATM) is an example of an interactive process in which a computer will perform a logic derived response to a user selection based on information retrieved from a networked database. The ATM process has a lot of similarities to other online transaction processes. The different logical responses are called scenarios. Such processes are typically designed with the aid of use cases and flowcharts, which guide the writing of the software code.

History

The earliest feedback control mechanism was used to tent the sails of windmills. It was patented by Edmund Lee in 1745.[4]

The centrifugal governor, which dates to the last quarter of the 18th century, was used to adjust the gap between millstones.[5] The centrifugal governor was also used in the automatic flour mill developed by Oliver Evans in 1785, making it the first completely automated industrial process. The governor was adopted by James Watt for use on a steam engine in 1788 after Watt’s partner Boulton saw one at a flour mill Boulton & Watt were building.[4]

The governor could not actually hold a set speed; the engine would assume a new constant speed in response to load changes. The governor was able to handle smaller variations such as those caused by fluctuating heat load to the boiler. Also, there was a tendency for oscillation whenever there was a speed change. As a consequence, engines equipped with this governor were not suitable for operations requiring constant speed, such as cotton spinning.[4]

Several improvements to the governor, plus improvements to valve cut-off timing on the steam engine, made the engine suitable for most industrial uses before the end of the 19th century. Advances in the steam engine stayed well ahead of science, both thermodynamics and control theory.[4]

The governor received relatively little scientific attention until James Clerk Maxwell published a paper that established the beginning of a theoretical basis for understanding control theory. Development of the electronic amplifier during the 1920s, which was important for long distance telephony, required a higher signal to noise ratio, which was solved by negative feedback noise cancellation. This and other telephony applications contributed to control theory. Military applications during the Second World War that contributed to and benefited from control theory were fire-control systems and aircraft controls. The word "automation" itself was coined in the 1940s by General Electric.[6] The so-called classical theoretical treatment of control theory dates to the 1940s and 1950s.[3]

Relay logic was introduced with factory electrification, which underwent rapid adaption from 1900 though the 1920s. Central electric power stations were also undergoing rapid growth and operation of new high pressure boilers, steam turbines and electrical substations created a large demand for instruments and controls.

Central control rooms became common in the 1920s, but as late as the early 1930s, most process control was on-off. Operators typically monitored charts drawn by recorders that plotted data from instruments. To make corrections, operators manually opened or closed valves or turned switches on or off. Control rooms also used color coded lights to send signals to workers in the plant to manually make certain changes.[7]

Controllers, which were able to make calculated changes in response to deviations from a set point rather than on-off control, began being introduced the 1930s. Controllers allowed manufacturing to continue showing productivity gains to offset the declining influence of factory electrification.[8]

In 1959 Texaco’s Port Arthur refinery became the first chemical plant to use digital control.[9] Conversion of factories to digital control began to spread rapidly in the 1970s as the price of computer hardware fell.

Significant applications

The automatic telephone switchboard was introduced in 1892 along with dial telephones.[10] By 1929, 31.9% of the Bell system was automatic. Automatic telephone switching originally used vacuum tube amplifiers and electro-mechanical switches, which consumed a large amount of electricity. Call volume eventually grew so fast that it was feared the telephone system would consume all electricity production, prompting Bell Labs to begin research on the transistor.[11]

The logic performed by telephone switching relays was the inspiration for the digital computer.

The first commercially successful glass bottle blowing machine was an automatic model introduced in 1905.[12] The machine, operated by a two man crew working 12 hour shifts, could produce 17,280 bottles in 24 hours, compared to 2,880 bottles made by a crew of six men and boys working in a shop for a day. The cost of making bottles by machine was 10 to 12 cents per gross compared to $1.80 per gross by the manual glassblowers and helpers.

Sectional electric drives were developed using control theory. Sectional electric drives are used on different sections of a machine where a precise differential must be maintained between the sections. In steel rolling, the metal elongates as it passes through pairs of rollers, which must run at successively faster speeds. In paper making the paper sheet shrinks as it passes around steam heated drying arranged in groups, which must run at successively slower speeds. The first application of a sectional electric drive was on a paper machine in 1919.[13] One of the most important developments in the steel industry during the 20th century was continuous wide strip rolling, developed by Armco in 1928.[14]

Before automation many chemicals were made in batches. In 1930, with the widespread use of instruments and the emerging use of controllers, the founder of Dow Chemical Co. was advocating continuous production.[15]

Self-acting machine tools that displaced hand dexterity so they could be operated by boys and unskilled laborers were developed by James Nasmyth in the 1840s.[16] Machine tools were automated with Numerical control (NC) using punched paper tape in the 1950s. This soon evolved into computerized numerical control (CNC).

Today extensive automation is practiced in practically every type of manufacturing and assembly process. Some of the larger processes include electrical power generation, oil refining, chemicals, steel mills, plastics, cement plants, fertilizer plants, pulp and paper mills, automobile and truck assembly, aircraft production, glass manufacturing, natural gas separation plants, food and beverage processing, canning and bottling and manufacture of various kinds of parts. Robots are especially useful in hazardous applications like automobile spray painting. Robots are also used to assemble electronic circuit boards. Automotive welding is done with robots and automatic welders are used in applications like pipelines.

Advantages and disadvantages

The main advantages of automation are:

  • Increased throughput or productivity.
  • Improved quality or increased predictability of quality.
  • Improved robustness (consistency), of processes or product.
  • Increased consistency of output.
  • Reduced direct human labor costs and expenses.

The following methods are often employed to improve productivity, quality, or robustness.

  • Install automation in operations to reduce cycle time.
  • Install automation where a high degree of accuracy is required.
  • Replacing human operators in tasks that involve hard physical or monotonous work.[17]
  • Replacing humans in tasks done in dangerous environments (i.e. fire, space, volcanoes, nuclear facilities, underwater, etc.)
  • Performing tasks that are beyond human capabilities of size, weight, speed, endurance, etc.
  • Economic improvement: Automation may improve in economy of enterprises, society or most of humanity. For example, when an enterprise invests in automation, technology recovers its investment; or when a state or country increases its income due to automation like Germany or Japan in the 20th Century.
  • Reduces operation time and work handling time significantly.
  • Frees up workers to take on other roles.
  • Provides higher level jobs in the development, deployment, maintenance and running of the automated processes.

The main disadvantages of automation are:

  • Causing unemployment and poverty by replacing human labor.
  • Security Threats/Vulnerability: An automated system may have a limited level of intelligence, and is therefore more susceptible to committing errors outside of its immediate scope of knowledge (e.g., it is typically unable to apply the rules of simple logic to general propositions).
  • Unpredictable/excessive development costs: The research and development cost of automating a process may exceed the cost saved by the automation itself.
  • High initial cost: The automation of a new product or plant typically requires a very large initial investment in comparison with the unit cost of the product, although the cost of automation may be spread among many products and over time.

In manufacturing, the purpose of automation has shifted to issues broader than productivity, cost, and time.

Lights out manufacturing

Lights out manufacturing is when a production system is 100% or near to 100% automated (not hiring any workers). In order to eliminate the need for labor costs all together.

Health and environment

The costs of automation to the environment are different depending on the technology, product or engine automated. There are automated engines that consume more energy resources from the Earth in comparison with previous engines and those that do the opposite[clarification needed] too.[citation needed] Hazardous operations, such as oil refining, the manufacturing of industrial chemicals, and all forms of metal working, were always early contenders for automation.[dubiousdiscuss][citation needed]

Convertibility and turnaround time

Another major shift in automation is the increased demand for flexibility and convertibility in manufacturing processes. Manufacturers are increasingly demanding the ability to easily switch from manufacturing Product A to manufacturing Product B without having to completely rebuild the production lines. Flexibility and distributed processes have led to the introduction of Automated Guided Vehicles with Natural Features Navigation.

Digital electronics helped too. Former analogue-based instrumentation was replaced by digital equivalents which can be more accurate and flexible, and offer greater scope for more sophisticated configuration, parametrization and operation. This was accompanied by the fieldbus revolution which provided a networked (i.e. a single cable) means of communicating between control systems and field level instrumentation, eliminating hard-wiring.

Discrete manufacturing plants adopted these technologies fast. The more conservative process industries with their longer plant life cycles have been slower to adopt and analogue-based measurement and control still dominates. The growing use of Industrial Ethernet on the factory floor is pushing these trends still further, enabling manufacturing plants to be integrated more tightly within the enterprise, via the internet if necessary. Global competition has also increased demand for Reconfigurable Manufacturing Systems.

Automation tools

Engineers can now have numerical control over automated devices. The result has been a rapidly expanding range of applications and human activities. Computer-aided technologies (or CAx) now serve the basis for mathematical and organizational tools used to create complex systems. Notable examples of CAx include Computer-aided design (CAD software) and Computer-aided manufacturing (CAM software). The improved design, analysis, and manufacture of products enabled by CAx has been beneficial for industry.[18]

Information technology, together with industrial machinery and processes, can assist in the design, implementation, and monitoring of control systems. One example of an industrial control system is a programmable logic controller (PLC). PLCs are specialized hardened computers which are frequently used to synchronize the flow of inputs from (physical) sensors and events with the flow of outputs to actuators and events.[19]

An automated online assistant on a website, with an avatar for enhanced human–computer interaction.

Human-machine interfaces (HMI) or computer human interfaces (CHI), formerly known as man-machine interfaces, are usually employed to communicate with PLCs and other computers. Service personnel who monitor and control through HMIs can be called by different names. In industrial process and manufacturing environments, they are called operators or something similar. In boiler houses and central utilities departments they are called stationary engineers.[20]

Different types of automation tools exist:

Limitations to automation

  • Current technology is unable to automate all the desired tasks.
  • Many operations using automation have large amounts of invested capital and produce high volumes of product, making malfunctions extremely costly and potentially hazardous. Therefore, some personnel are needed to insure that the entire system functions properly and that safety and product quality are maintained.
  • As a process becomes increasingly automated, there is less and less labor to be saved or quality improvement to be gained. This is an example of both diminishing returns and the logistic function.
  • As more and more processes become automated, there are fewer remaining non-automated processes. This is an example of exhaustion of opportunities. New technological paradigms may however set new limits that surpass the previous limits.

Current limitations

Many roles for humans in industrial processes presently lie beyond the scope of automation. Human-level pattern recognition, language comprehension, and language production ability are well beyond the capabilities of modern mechanical and computer systems. Tasks requiring subjective assessment or synthesis of complex sensory data, such as scents and sounds, as well as high-level tasks such as strategic planning, currently require human expertise. In many cases, the use of humans is more cost-effective than mechanical approaches even where automation of industrial tasks is possible. Overcoming these obstacles is a theorized path to post-scarcity economics.

Recent and emerging applications

KUKA industrial robots being used at a bakery for food production

Automated retail

Food and drink

The food retail industry has started to apply automation to the ordering process; McDonald's has introduced touch screen ordering and payment systems in many of its restaurants, reducing the need for as many cashier employees.[21] The University of Texas at Austin has introduced fully automated cafe retail locations.[22] Some Cafes and restaurants have utilized mobile and tablet "apps" to make the ordering process more efficient by customers ordering and paying on their device.[23][24] Some restaurants have automated food delivery to customers tables using a Conveyor belt system. The use of robots is sometimes employed to replace waiting staff.[25]

Stores

Many Supermarkets and even smaller stores are rapidly introducing Self checkout systems reducing the need for employing checkout workers.

Online shopping could be considered a form of automated retail as the payment and checkout are through an automated Online transaction processing system. Other forms of automation can also be an integral part of online shopping, for example the deployment of automated warehouse robotics such as that applied by Amazon using Kiva Systems.

Automated mining

Involves the removal of human labor from the mining process.[26] The mining industry is currently in the transition towards Automation. Currently it can still require a large amount of human capital, particularly in the third world where labor costs are low so there is less incentive for increasing efficiency through automation.

Automated video surveillance

The Defense Advanced Research Projects Agency (DARPA) started the research and development of automated visual surveillance and monitoring (VSAM) program, between 1997 and 1999, and airborne video surveillance (AVS) programs, from 1998 to 2002. Currently, there is a major effort underway in the vision community to develop a fully automated tracking surveillance system. Automated video surveillance monitors people and vehicles in real time within a busy environment. Existing automated surveillance systems are based on the environment they are primarily designed to observe, i.e., indoor, outdoor or airborne, the amount of sensors that the automated system can handle and the mobility of sensor, i.e., stationary camera vs. mobile camera. The purpose of a surveillance system is to record properties and trajectories of objects in a given area, generate warnings or notify designated authority in case of occurrence of particular events.[27]

Automated highway systems

As demands for safety and mobility have grown and technological possibilities have multiplied, interest in automation has grown. Seeking to accelerate the development and introduction of fully automated vehicles and highways, the United States Congress authorized more than $650 million over six years for intelligent transport systems (ITS) and demonstration projects in the 1991 Intermodal Surface Transportation Efficiency Act (ISTEA). Congress legislated in ISTEA that “the Secretary of Transportation shall develop an automated highway and vehicle prototype from which future fully automated intelligent vehicle-highway systems can be developed. Such development shall include research in human factors to ensure the success of the man-machine relationship. The goal of this program is to have the first fully automated highway roadway or an automated test track in operation by 1997. This system shall accommodate installation of equipment in new and existing motor vehicles." [ISTEA 1991, part B, Section 6054(b)].

Full automation commonly defined as requiring no control or very limited control by the driver; such automation would be accomplished through a combination of sensor, computer, and communications systems in vehicles and along the roadway. Fully automated driving would, in theory, allow closer vehicle spacing and higher speeds, which could enhance traffic capacity in places where additional road building is physically impossible, politically unacceptable, or prohibitively expensive. Automated controls also might enhance road safety by reducing the opportunity for driver error, which causes a large share of motor vehicle crashes. Other potential benefits include improved air quality (as a result of more-efficient traffic flows), increased fuel economy, and spin-off technologies generated during research and development related to automated highway systems.[28]

Automated waste management

Automated waste collection trucks prevent the need for as many workers as well as easing the level of Labor required to provide the service.[29]

Home automation

Home automation (also called domotics) designates an emerging practice of increased automation of household appliances and features in residential dwellings, particularly through electronic means that allow for things impracticable, overly expensive or simply not possible in recent past decades.

Industrial automation

Industrial automation deals primarily with the automation of manufacturing, quality control and material handling processes. General purpose controllers for industrial processes include Programmable logic controllers and computers. One trend is increased use of Machine vision to provide automatic inspection and robot guidance functions, another is a continuing increase in the use of robots.

Energy efficiency in industrial processes has become a higher priority. Semiconductor companies like Infineon Technologies are offering 8-bit micro-controller applications for example found in motor controls, general purpose pumps, fans, and ebikes to reduce energy consumption and thus increase efficiency.

Low Cost automation

Low Cost Automation (popularly known as LCA), is the introduction of simple pneumatic, hydraulic, mechanical and electrical devices into the existing production machinery, with a view to improving their productivity. These would also enable the operation of these equipment by even semi-skilled and unskilled labour, with a little training. This will involve the use of standardised parts and devices to mechanise or automate machines, processes and systems. Utilising a human being as a source of energy is an inefficient method, in addition to being boring and monotonous to the worker. It is estimated that it costs approximately 400 times as much for a man to supply 1 kwh of energy as it does to get this from electrical power. Similarly, using an operator as a sensing device is not, only un-economical but also would result in excessive fatigue.

It is considered a new tool in the hands of management to dispense with the workers. It is feared that introduction of automation would lead to large scale unemployment and hence, considered as an enemy of the working class. Let us try to find out how far these are true. First of all, the concept of automation is not new; only the word is comparatively new. Describing automation, it is said that its main characteristics are 'feedback' or 'closed loop' system. There is nothing new about the feedback system as, long ago, James Watt invented the governor, which is essentially a feed back mechanism, to provide the steam engine with a smooth constant speed control under changing load conditions. Secondly, automation is also described as numerical control, punched or magnetic tape control. Again, there is nothing new in this, as in the early 18th century Basil Buchan designed the punched card control for looms to get the desired pattern woven correctly, without faults due to human error. As regards the fear of increased unemployment it is true that indiscriminate application of automation on a large scale would result in increased unemployment problem. But, it is worth remembering here that it 'is not the automation itself but the application that is to be blamed. Low cost Automation. which unfortunately has not received as much attention as it deserves, perhaps because of lack of publicity, lack of knowledge and understanding, does not lead to retrenchment as is feared by many. Low C6St Automation results in improvements in production processes, systems etc. And any improvements would result in reduced time for the work being done and, if the quantum of work remains the same, requirements of labour would reduce. But, looking to a growing economy like ours, the demand for commodities are rarely met. Therefore, if the amount of time taken to do a job is reduced, more number of jobs can be done in a day, a month or a year. This means that there would be increased productivity with attendant reduction in the unit cost of production. No doubt there would be some minor displacement of workers, but this would not result in retrenchment of workers as. the increased output and increased market demand would definitely not only absorb whatever workers have been found surplus but also provide employment opportunities to some more. But shunning away from improvement, thinking that it would result in displacement of some workers from their existing place, would, in the long run, affect the company in the smaller sense and the economy as a whole in the broader sense. One should not lose sight of the long term benefits of increased productivity, which is essential for achieving prosperity. Another argument one comes across is that 'our labour is cheap; so why go in for LCA?’ This is a clear case of misunderstanding between 'cheap labour' and 'low labour costs'. The point that should be remembered is not how much we pay a person but how much output we get for each rupee we pay

Agriculture

Now that we’re moving towards automated orange-sorting [30] and autonomous tractors,[31] the next step in automated agriculture is robotic strawberry pickers.[32]

Agent-assisted Automation

Agent-assisted Automation refers to automation used by call center agents to handle customer inquiries. There are two basic types: desktop automation and automated voice solutions. Desktop automation refers to software programming that makes it easier for the call center agent to work across multiple desktop tools. The automation would take the information entered into one tool and populate it across the others so it did not have to be entered more than once, for example. Automated voice solutions allow the agents to remain on the line while disclosures and other important information is provided to customers in the form of pre-recorded audio files. Specialized applications of these automated voice solutions enable the agents to process credit cards without ever seeing or hearing the credit card numbers or CVV codes[33]


The key benefit of agent-assisted automation is compliance and error-proofing. Agents are sometimes not fully trained or they forget or ignore key steps in the process. The use of automation ensures that what is supposed to happen on the call actually does, every time.

Relationship to unemployment

Based on a formula by Gilles Saint-Paul, an economist at Toulouse 1 University, the demand for unskilled human capital declines at a slower rate than the demand for skilled human capital increases.[34] In the long run and for society as a whole it has led to cheaper products, lower average work hours, and new industries forming (I.e, robotics industries, computer industries, design industries). These new industries provide many high salary skill based jobs to the economy.

See also

References

  1. ^ Rifkin, Jeremy (1995). The End of Work: The Decline of the Global Labor Force and the Dawn of the Post-Market Era. Putnam Publishing Group. pp. 66, 75. ISBN 0-87477-779-8.
  2. ^ Bennett, S. (1993). A History of Control Engineering 1930-1955. London: Peter Peregrinus Ltd. On behalf of the Institution of Electrical Engineers. ISBN 0-86341-280-7.
  3. ^ a b Bennett 1993 harvnb error: multiple targets (2×): CITEREFBennett1993 (help)
  4. ^ a b c d Bennett 1979
  5. ^ Bennett, S. (1979). A History of Control Engineering 1800-1930. London: Peter Peregrinus Ltd. pp. 47, 266. ISBN 0-86341-047-2.
  6. ^ See Wiktionary on "[[wikt:automation|]]"
  7. ^ Bennett 1993, pp. 31 harvnb error: multiple targets (2×): CITEREFBennett1993 (help)
  8. ^ Field, Alexander J. (2011). A Great Leap Forward: 1930s Depression and U.S. Economic Growth. New Haven, London: Yale University Press. ISBN 978-0-300-15109-1<Factory productivity was greatly increased by electrification in the 1920s. Manufacturing productivity growth fell from 5.2%/yr 1919-29 to 2.76%/yr 1929-41. Field notes that spending on non-medical instruments increased significantly from 1929-33 and remained strong thereafter.)>{{cite book}}: CS1 maint: postscript (link)
  9. ^ Rifkin 1995
  10. ^ Jerome, Harry (1934). Mechanization in Industry, National Bureau of Economic Research (PDF). p. 158.
  11. ^ Constable, George; Somerville, Bob (1964). A Century of Innovation: Twenty Engineering Achievements That Transformed Our Lives. Joseph Henry Press. ISBN 0309089085.
  12. ^ "The American Society of Mechanical Engineers Designates the Owens "AR" Bottle Machine as an International Historic Engineering Landmark" (PDF). 1983.
  13. ^ Bennett 1993, pp. 7 harvnb error: multiple targets (2×): CITEREFBennett1993 (help)
  14. ^ Landes, David. S. (1969). The Unbound Prometheus: Technological Change and Industrial Development in Western Europe from 1750 to the Present. Cambridge, New York: Press Syndicate of the University of Cambridge. p. 475. ISBN 0-521-09418-6.
  15. ^ Bennett 1993, pp. 65 harvnb error: multiple targets (2×): CITEREFBennett1993 (help)Note 1
  16. ^ Musson; Robinson (1969). Science and Technology in the Industrial Revolution. University of Toronto Press.
  17. ^ Process automation, retrieved on 20.02.2010
  18. ^ "Engineers' CAx education—it's not only CAD".
  19. ^ "Automation - Definitions from Dictionary.com". dictionary.reference.com. Archived from the original on 29 April 2008. Retrieved 2008-04-22. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  20. ^ Stationary Engineers and Boiler Operators
  21. ^ [1][dead link]
  22. ^ Automation Comes To The Coffeehouse With Robotic Baristas. Singularity Hub. Retrieved on 2013-07-12.
  23. ^ Ordering at the table using your Smartphone. ICRTouch. Retrieved on 2013-07-12.
  24. ^ New Pizza Express app lets diners pay bill using iPhone. Bighospitality.co.uk. Retrieved on 2013-07-12.
  25. ^ Wheelie: Toshiba's new robot is cute, autonomous and maybe even useful (video). TechCrunch (2010-03-12). Retrieved on 2013-07-12.
  26. ^ Rio to trial automated mining at The Australian
  27. ^ Javed, O, & Shah, M. (2008). Automated multi-camera surveillance. City of Publication: Springer-Verlag New York Inc.
  28. ^ Menzies, Thomas. R. National Automated Highway System Research Program A review. 253. Washington D.C.: Transportation Research Board, 1998. 2-50.
  29. ^ Hepker, Aaron. (2012-11-27) Automated Garbage Trucks Hitting Cedar Rapids Streets | KCRG-TV9 | Cedar Rapids, Iowa News, Sports, and Weather | Local News. Kcrg.com. Retrieved on 2013-07-12.
  30. ^ Artificial vision used to detect rotten oranges and pick through mandarins. Gizmag.com. Retrieved on 2013-07-12.
  31. ^ Autonomous self-steering tractor could make farmers' lives a lot easier. Gizmag.com. Retrieved on 2013-07-12.
  32. ^ Robotic strawberry pickers could be on the way. Gizmag.com. Retrieved on 2013-07-12.
  33. ^ Adsit, Dennis (February 21, 2011). "Error-proofing strategies for managing call center fraud". isixsigma.com.
  34. ^ Saint-Paul, G. (2008). Innovation and inequality:How does technical progress affect workers? Princeton, New Jersey: Princeton University Press.

Further reading

  • Bennett, S. (1993). A History of Control Engineering 1930-1955. London: Peter Peregrinus Ltd. On behalf of the Institution of Electrical Engineers. ISBN 0-86341-280-7.
  • Dunlop, John T. (ed.) (1962), Automation and Technological Change: Report of the Twenty-first American Assembly, Englewood Cliffs, NJ, USA: Prentice-Hall. {{citation}}: |first= has generic name (help)* Dunlop, John T. (ed.) (1962), Automation and Technological Change: Report of the Twenty-first American Assembly, Englewood Cliffs, NJ, USA: Prentice-Hall. {{citation}}: |first= has generic name (help)
  • Ouellette, Robert (1983), Automation Impacts on Industry, Ann Arbor, MI, USA: Ann Arbor Science Publishers, ISBN 978-0-250-40609-8.
  • Trevathan, Vernon L. (ed.) (2006), A Guide to the Automation Body of Knowledge (2nd ed.), Research Triangle Park, NC, USA: International Society of Automation, ISBN 978-1-55617-984-6. {{citation}}: |first= has generic name (help)