Gear pump: Difference between revisions
No edit summary |
Removed extra "]" which appeared at the top of the page |
||
| Line 1: | Line 1: | ||
{{Refimprove|date=February 2010}} |
{{Refimprove|date=February 2010}} |
||
[[File:Gear pump exploded.png|thumb|right|320px|An [[exploded view]] of an external gear pump.]] |
[[File:Gear pump exploded.png|thumb|right|320px|An [[exploded view]] of an external gear pump.]] |
||
[[File:Internal gear pump.gif|thumb|right|320px|Water flows from left to right in this internal gear pump. |
[[File:Internal gear pump.gif|thumb|right|320px|Water flows from left to right in this internal gear pump.]] |
||
[[File:Gear type oil pump from 139QMB scooter engine.jpg|thumb|right|200px|Oil pump from a scooter engine]] |
[[File:Gear type oil pump from 139QMB scooter engine.jpg|thumb|right|200px|Oil pump from a scooter engine]] |
||
A '''gear pump''' uses the meshing of gears to pump fluid by displacement.<ref>{{cite web|url=http://www.pumps.org/content_detail_pumps.aspx?id=1772 |title=Welcome to the Hydraulic Institute |publisher=Pumps.org |date= |accessdate=2013-08-18}}</ref> They are one of the most common types of [[pump]]s for [[hydraulic machinery|hydraulic fluid power]] applications. |
A '''gear pump''' uses the meshing of gears to pump fluid by displacement.<ref>{{cite web|url=http://www.pumps.org/content_detail_pumps.aspx?id=1772 |title=Welcome to the Hydraulic Institute |publisher=Pumps.org |date= |accessdate=2013-08-18}}</ref> They are one of the most common types of [[pump]]s for [[hydraulic machinery|hydraulic fluid power]] applications. |
||
Revision as of 14:40, 3 August 2015
 | This article needs additional citations for verification. (February 2010) |
A gear pump uses the meshing of gears to pump fluid by displacement.[1] They are one of the most common types of pumps for hydraulic fluid power applications.
Gear pumps are also widely used in chemical installations to pump high viscosity fluids. There are two main variations; external gear pumps which use two external spur gears, and internal gear pumps which use an external and an internal spur gears (internal spur gear teeth face inwards, see below). Gear pumps are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Some gear pumps are designed to function as either a motor or a pump.
Theory of operation
As the gears rotate they separate on the intake side of the pump, creating a void and suction which is filled by fluid. The fluid is carried by the gears to the discharge side of the pump, where the meshing of the gears displaces the fluid. The mechanical clearances are small— in the order of 10 μm. The tight clearances, along with the speed of rotation, effectively prevent the fluid from leaking backwards.
The rigid design of the gears and houses allow for very high pressures and the ability to pump highly viscous fluids.
Many variations exist, including; helical and herringbone gear sets (instead of spur gears), lobe shaped rotors similar to Roots blowers (commonly used as superchargers), and mechanical designs that allow the stacking of pumps. The most common variations are shown below (the drive gear is shown blue and the idler is shown purple).
-
External gear pump design for hydraulic power applications. -
Internal gear (Gerotor) pump design for automotive oil pumps. -
An external precision gear pump is usually limited to a maximum working pressure of 210 bars (21,000 kPa) and a maximum speed of 3,000 rpm. Some manufacturers produce gear pumps with higher working pressures and speeds but these types of pumps tend to be noisy and special precautions may have to be made.[2]
Suction and pressure ports need to interface where the gears mesh (shown as dim gray lines in the internal pump images). Some internal gear pumps have an additional, crescent-shaped seal (shown above, right).
Pump formulas:
- Flow rate in US gal/min = Fluid Density X Pump Capacity X rpm
- Power in hp = US gal/min X (lbf/in³)/1714
Generally used in:
- Petrochemicals: Pure or filled bitumen, pitch, diesel oil, crude oil, lube oil etc.
- Chemicals: Sodium silicate, acids, plastics, mixed chemicals, isocyanates etc.
- Paint and ink.
- Resins and adhesives.
- Pulp and paper: acid, soap, lye, black liquor, kaolin, lime, latex, sludge etc.
- Food: Chocolate, cacao butter, fillers, sugar, vegetable fats and oils, molasses, animal food etc.
See also
References
- ^ "Welcome to the Hydraulic Institute". Pumps.org. Retrieved 2013-08-18.
- ^ Pinches, M J (2000). Kempe's Engineers Year-Book, p. 2070. Miller Freeman, Kent. ISBN 0863824420.
External links
