Lattice truss bridge: Difference between revisions
| Line 12: | Line 12: | ||
*[[Bartonsville Covered Bridge]] |
*[[Bartonsville Covered Bridge]] |
||
*[[Brown Covered Bridge]] |
*[[Brown Covered Bridge]] |
||
*[[Burt Henry Covered Bridge]] |
|||
*[[Cornish-Windsor Covered Bridge]] |
|||
*[[Euharlee Covered Bridge]] |
|||
*[[Kingsley Covered Bridge]] |
|||
*[[Poole's Mill Covered Bridge]] |
|||
*[[Root Road Covered Bridge]] |
|||
*[[Waterford Covered Bridge]] |
|||
*Watson Mill Covered [[Watson Mill Bridge State Park|Bridge]] |
*Watson Mill Covered [[Watson Mill Bridge State Park|Bridge]] |
||
Revision as of 20:32, 24 August 2016
 Interior structure of a covered bridge utilizing a plank-lattice structure | |
| Ancestor | Truss bridge |
|---|---|
| Related | None |
| Descendant | None |
| Carries | Pedestrians, livestock, vehicles |
| Span range | short to medium |
| Material | wood planks and beams or steel angles and beams, appropriate decking material |
| Movable | No |
| Design effort | medium |
| Falsework required | Sometimes |
A lattice bridge is a form of truss bridge that uses a large number of small and closely spaced diagonal elements that form a lattice. It was patented by architect Ithiel Town in 1820 and 1835 as Town's lattice truss.
Originally a design to allow a substantial bridge to be made from planks employing lower–skilled labor, rather than heavy timbers and more expensive carpenters, this type of bridge has also been constructed using a large number of relatively light iron or steel members. The individual elements are more easily handled by the construction workers, but the bridge also requires substantial support during construction. A simple lattice truss will transform the applied loads into a thrust, as the bridge will tend to change length under load. This is resisted by pinning the lattice members to the top and bottom chords, which are more substantial than the lattice members, but which may also be fabricated from relatively small elements rather than large beams.
Belfast truss
The Belfast truss is a cross between the Town's lattice truss and the bowstring truss. It was developed in Ireland as a wide-span shallow rise roof truss for industrial structures. McTear & Co of Belfast, Ireland began fabricating these trusses in wood starting around 1866. By 1899, spans of 24 meters had been achieved, and in the 20th century, shipyards and airplane hangars demanded ever greater clear spans.[1]
Wood lattice truss bridges
_townsend_latice1982.jpg)
- Watson Mill Covered Bridge
Iron or steel lattice truss bridges
Howard Carroll built the first completely wrought-iron lattice truss bridge. This was built for the New York Central Railroad in 1859.[2]
- Bennerley Viaduct
- Bridge in Brown Township
- Dowery Dell Viaduct, also known as Hunnington or Frankley Viaduct
- Kew Railway Bridge
- Norwottuck Rail Trail Bridge
See also
References
- ^ J. R. Gilfillan, S. G. Gilbert, The Historic Belfast Timber Truss - A Way to Promote Sustainable Roof Construction, 2002.
- ^ J. A. L. Waddell, Bridge Engineering Vol. 1, Wiley, New York, 1916; page 23.