Reticulocyte production index: Difference between revisions
→Calculation of RPI: Disputed section, see the Talk page |
→Calculation of RPI: Disambiguate nomenclature: Replace "Retic Index" with "CorrectedReticPercentage" and "Retic Count" with "Retic Percentage". |
||
| Line 16: | Line 16: | ||
Reticulocyte Production Index is calculated as follows: |
Reticulocyte Production Index is calculated as follows: |
||
'''1.'''<math>Retic |
'''1.'''<math>Corrected Retic Percentage = Retic Percentage * {Hematocrit \over Normal Hematocrit}</math> |
||
A value of 45 is usually used as a normal hematocrit.<ref name="urlUAB Hematopathology">{{cite web |url=http://peir.path.uab.edu/heme/messages/637/648.html |title=UAB Hematopathology |work= |accessdate=2009-02-07}}</ref> |
A value of 45 is usually used as a normal hematocrit.<ref name="urlUAB Hematopathology">{{cite web |url=http://peir.path.uab.edu/heme/messages/637/648.html |title=UAB Hematopathology |work= |accessdate=2009-02-07}}</ref> |
||
| Line 40: | Line 40: | ||
|} |
|} |
||
'''So,''' in a person whose reticulocyte |
'''So,''' in a person whose reticulocyte percentage is 5%, hemoglobin 7.5 g/dL, hematocrit 25%, the RPI would be: |
||
<math>RPI = {Retic |
<math>RPI = {Corrected Retic Percentage \over Maturation Correction}</math> '''→ RPI ''' <math>= {{5 * {25 \over 45}} \over 2} = </math>'''1.4''' |
||
Alternatively some books provide the following formula: |
Alternatively some books provide the following formula: |
||
<math>RPI = Retic |
<math>RPI = Retic Percentage * {Hemoglobin(observed) \over Normal Hemoglobin}*0.5</math> |
||
==Interpretation== |
==Interpretation== |
||
Revision as of 16:40, 30 December 2016
The Reticulocyte production index (RPI, also called a corrected reticulocyte count) is a calculated value used in the diagnosis of anemia. This calculation is necessary because the raw reticulocyte count is misleading in anemic patients. The problem arises because the reticulocyte count is not really a count but rather a percentage: it reports the number of reticulocytes as a percentage of the number of red blood cells. In anemia, the patient's red blood cells are depleted, creating an erroneously elevated reticulocyte count.
Physiology
Reticulocytes are newly produced red blood cells. They are slightly larger than totally mature red blood cells, and have some residual ribosomal RNA. The presence of RNA allows a visible blue stain to bind or, in the case of fluorescent dye, result in a different brightness. This allows them to be detected and counted as a distinct population.[2]
The idea of the RPI is to assess whether the bone marrow is producing an appropriate response to an anemic state. Reticulocyte production should increase in response to any loss of red blood cells. It should increase within 2–3 days of a major acute hemorrhage, for instance, and reach its peak in 6–10 days.[3] If reticulocyte production is not raised in response to anemia, then the anemia may be due to an acute cause with insufficient time to compensate, or there is a defect with red blood cell production in the bone marrow. Marrow defects include nutritional deficiencies (i.e. iron, folate, or B12) or insufficient erythropoietin, the stimulus for red blood cell production. Reticulocytopenia, or "aplastic crisis", is the medical term for an abnormal decrease of reticulocytes in the body
The reticulocyte percentage index may find new use as a more reliable detector of erythropoietin-doping in athletes. The use of this method is referred to as "biological passport."
Calculation of RPI
 | This section's factual accuracy is disputed. |
Reticulocyte Production Index is calculated as follows:
1.
A value of 45 is usually used as a normal hematocrit.[4]
2.The next step is to correct for the longer life span of prematurely released reticulocytes in the blood—a phenomenon of increased red blood cell production. This relies on a table:
| Hematocrit (%) | Retic survival (days) = maturation correction |
|---|---|
| 36-45 | 1.0 |
| 26-35 | 1.5 |
| 16-25 | 2.0 |
| 15 and below | 2.5 |
So, in a person whose reticulocyte percentage is 5%, hemoglobin 7.5 g/dL, hematocrit 25%, the RPI would be:
→ RPI 1.4
Alternatively some books provide the following formula:
Interpretation
- The reticulocyte index (RI) should be between 0.5% and 2.5% for a healthy individual.[5]
- RI < 2% with anemia indicates loss of red blood cells, but decreased production of reticulocytes (i.e., an inadequate response to correct the anemia) and therefore red blood cells.[2]
- RI > 3% with anemia indicates loss of red blood cells (from causes such as destruction, bleeding, etc.), with an increased compensatory production of reticulocytes to replace the lost red blood cells.[2]
Interpretation of these values are not standard and vary based on specific laboratory values and clinical context. [6]
References
- ^ Callaway (2011). "Racing Just To Keep Up". Nature. 475: 283. doi:10.1038/475283a.
- ^ a b c Adamson JW, Longo DL. Anemia and polycythemia. in: Braunwald E, et al. Harrison's Principles of Internal Medicine. (15th Edition). McGraw Hill (New York), 2001.
- ^ Hoffbrand AV, et al. Essential Haematology. (Fourth Edition) Blackwell Science (Oxford), 2001.
- ^ "UAB Hematopathology". Retrieved 2009-02-07.
- ^ Hoffbrand, A.V, Moss, P.A.H, (2011), Essential Haemotology,6th Ed, Wiley and Blackwell; West Sussex, UK.
- ^ http://www.sysmex.ru/files/articles/Xtra_online_reticulocytes.pdf