Hydroseeding: Difference between revisions
Tag: possible conflict of interest |
|||
| Line 14: | Line 14: | ||
The first commercial hydroseeder was invented in [[United States]] in the early 1950s and was used in the [[United Kingdom]] in the 1960s. |
The first commercial hydroseeder was invented in [[United States]] in the early 1950s and was used in the [[United Kingdom]] in the 1960s. |
||
Hydroseeding was first used and experimented with in the 1940’s. During the construction of our interstate system in the 1950’s, a better and faster way to apply grass seed was needed. A manufacturer designed and built a reliable machine that could effectively and quickly apply the hydroseed slurry. This was the beginning of the hydroseed industry. At this time, paper manufactures were also involved in developing mulches for the hydro seed process. Since then, more manufactures of machines and mulches have entered the industry, to provide for the growing demand. [http://commercialhydroseeding.com/hydroseeding/'' |
Hydroseeding was first used and experimented with in the 1940’s. During the construction of our interstate system in the 1950’s, a better and faster way to apply grass seed was needed. A manufacturer designed and built a reliable machine that could effectively and quickly apply the hydroseed slurry. This was the beginning of the hydroseed industry. At this time, paper manufactures were also involved in developing mulches for the hydro seed process. Since then, more manufactures of machines and mulches have entered the industry, to provide for the growing demand. [http://commercialhydroseeding.com/hydroseeding/''CommercialHydroseeding.com''] |
||
==Advantages== |
==Advantages== |
||
Revision as of 02:13, 13 July 2017
 | This article needs additional citations for verification. (May 2011) |
Hydroseeding (or hydraulic mulch seeding, hydro-mulching, hydraseeding) is a planting process that uses a slurry of seed and mulch. It is often used as an erosion control technique on construction sites, as an alternative to the traditional process of broadcasting or sowing dry seed.
Description
The hydroseeding slurry is transported in a tank, either truck- or trailer-mounted and sprayed over prepared ground. Helicopters have been used to cover larger areas. Aircraft application may also be used on burned wilderness areas after a fire, and in such uses may contain only soil stabilizer to avoid introducing non-native plant species. Hydroseeding is an alternative to the traditional process of broadcasting or sowing dry seed. A study conducted along the lower Colorado River in Arizona, the United States found that hydroseeding could be used to restore riparian vegetation in cleared land.[1]
The slurry often has other ingredients including fertilizer, tackifying agents, fiber mulch, and green dye.[2]
History
The first commercial hydroseeder was invented in United States in the early 1950s and was used in the United Kingdom in the 1960s.
Hydroseeding was first used and experimented with in the 1940’s. During the construction of our interstate system in the 1950’s, a better and faster way to apply grass seed was needed. A manufacturer designed and built a reliable machine that could effectively and quickly apply the hydroseed slurry. This was the beginning of the hydroseed industry. At this time, paper manufactures were also involved in developing mulches for the hydro seed process. Since then, more manufactures of machines and mulches have entered the industry, to provide for the growing demand. CommercialHydroseeding.com
Advantages
If planting a relatively large area, hydroseeding [3] can be completed in a very short period of time. It can be very effective for hillsides and sloping lawns to help with erosion control and quick planting. Hydroseeding will typically cost less than planting with sod, but more than broadcast seeding. Results are often quick with high germination rates producing grass growth in about a week and mowing maintenance beginning around 3 to 4 weeks from the date of application. Fiber mulch accelerates the growing process by maintaining moisture around the seeds thereby increasing the rate of germination.[4]
See also
References
- ^ Matthew, R.G.; A.M. Michael; M.K. Martin; E.R. Barbara; M.G. Gregg; P.B. Daniel (2011). "Direct seeding for riparian tree re-vegetation: Small-scale field study of seeding methods and irrigation techniques". Ecological Engineering. 37: 864–872.
- ^ California Department of Transportation (CalTrans). Sacramento, CA. "Construction Site Best Management Practices (BMP) Manual." Section 3, BMP No. SS-4. March 2003.
- ^ Cook, Owen (2016-05-04). "Lawncare via. Hydroseeding". Tampa Landscaping. Retrieved 2016-05-04.
- ^ West, Dawn (2006-08-21). "Planting by Hydroseeding". All About Lawns. Retrieved 2013-05-14.
- Keating, Janis (March–April 2011). "Hydroseeding Moves Up". Erosion Control. 18 (2). Forester Media: 18–29.