Mitsubishi 4B1 engine

4B1
Overview
Manufacturer	Mitsubishi Motors
Also called	World Engine
Production	2005–present
Layout
Cylinder block material	Aluminium die cast
Cylinder head material	Aluminium die cast
Valvetrain	Direct acting DOHC, 16 valves, continuously variable MIVEC intake and exhaust valve timing
Chronology
Predecessor	Mitsubishi 4G6 engine
Successor	Mitsubishi 4J1 engine

The Mitsubishi 4B1 engine is a range of all-alloy straight-4 engines built at Mitsubishi's Japanese "World Engine" powertrain plant in Shiga on the basis of the Global Engine Manufacturing Alliance (GEMA). Although the basic designs of the various engines are the same, their exact specifications are individually tailored for each partner (Chrysler, Mitsubishi, and Hyundai). The cylinder block and other basic structural parts of the engine were jointly developed by the GEMA companies, but the intake and exhaust manifolds, the cylinder head’s intake and exhaust ports, and other elements related to engine tuning were independently developed by Mitsubishi.

All engines developed within this family have aluminium cylinder block and head, four valves per cylinder, double overhead camshaft layouts, and MIVEC continuous variable valve timing. All variations of 4B1 engine share the same short block. The difference in displacement is achieved by variance in bore and stroke.

The 4B1 engine family is the first to have the continuously variable valve timing MIVEC system applied not only to its intake valves but also to its exhaust valves. The intake and exhaust cam timing is continuously independently controlled and provide four optimized engine operating modes.

4B10

Specifications

Engine type	Inline 4-cylinder DOHC 16v, MIVEC
Displacement	1.8 L (1,798 cc)
Bore	86 mm
Stroke	77.4 mm
Compression ratio	10.5:1
Fuel system	ECI multiple
Peak power	103-105 kW (140-143 PS) at 6000 rpm
Peak torque	172 N⋅m (17.5 kg⋅m) at 4250 rpm

Applications

• 2007 Mitsubishi Lancer
• 2010 Mitsubishi RVR (Japan)
• 2010 Proton Inspira

4B11

Specifications

Engine type	Inline 4-cylinder DOHC 16v, MIVEC
Displacement	2.0 L (1,998 cc)
Bore	86 mm
Stroke	86 mm
Compression ratio	10:1
Fuel system	ECI multiple
Peak power	110-116 kW (140-155 hp) at 6,000 rpm
Peak torque	199 N·m (146 lb·ft) at 4,250 rpm

Applications

• 2007, 2010 Mitsubishi Lancer
• 2009 Mitsubishi Outlander (Facelift Europe)
• 2010 Mitsubishi ASX, Mitsubishi RVR (Canada)
• 2010 Proton Inspira
• 2014 Mitsubishi Lancer
• 2015 Mitsubishi Lancer
• 2016 Mistubishi Lancer

Characteristics

The engines's bore and stroke both measure 86.0 mm, which engineers refer to as square. According to Mitsubishi, the new cylinder dimensions contribute to a free-revving character (max power at 6,500 rpm), linear power delivery and wide torque curve. Mitsubishi used a timing chain instead of a belt for better reliability and iridium spark plugs to lower emissions and to help extend major service intervals for lower cost of ownership. To reduce weight, Mitsubishi used a plastic cam cover and intake manifold and double-layer stainless steel exhaust manifold. The exhaust manifold has a rear location on the transverse engine, compared to the front location for the previous engine, yielding important benefits such as better emissions performance. To lower vibration, Mitsubishi used a 4-point inertial axis system with cylindrical hydraulic engine mounts on the left and right sides. A lightweight, high-rigidity squeeze-cast aluminium bracket on the right side mount (engine side) lowers engine noise under acceleration. A lightweight, high-rigidity steel plate bracket on the left side mount (transmission side) lowers gear noise. A custom-tuned insulator was developed for the front and rear mounts to help control both idle vibration and acceleration shock.

4B11T

Specifications

Engine type	Inline 4-cylinder DOHC 16v, Turbo MIVEC
Displacement	2.0 L (1,998 cc)
Bore	86 mm
Stroke	86 mm
Compression ratio	9:1
Fuel system	ECI multiple
Peak power	206 kW (280 PS) at 6,500 rpm (Japanese market) 217 kW (291 PS) at 6,500 rpm (US market) 177 kW (240 PS) (Lancer Ralliart) 217 kW (295 PS) at 6,500 rpm (European market) 301.5 kW (410 PS) (UK only FQ400)
Peak torque	422 N·m (311 lb·ft) at 3,500 rpm (Japanese market) 407 N·m (300 lb·ft) at 4,400 rpm (US market) 343 N·m from 2,500 to 4,725 rpm (353 N·m at 3,000 rpm) (Lancer Ralliart) 366 N·m at 3,500 rpm (European market) 542 N·m at 3,500 rpm (UK only FQ400)

Applications

• 2007-2016 Mitsubishi Lancer Evolution
• 2008 Mitsubishi Lancer Ralliart (detuned with smaller turbo)

Characteristics

Peak power and torque figures of 206 kW and 422 N·m are for Japanese market Lancer Evolution models and figures of 217 kW and 407 N·m are for US market models.

The 4B11T is the first engine in the Lancer Evolution series that uses a die-cast aluminium cylinder block versus the cast-iron block used in the previous turbocharged 4G63 engine that powered all previous models. The engine weight has been reduced by 12 kg (26 lb) compared to the 4G63, even with the addition of a timing chain instead of a belt and MIVEC continuous variable valve timing on both the intake and exhaust camshafts (the 4G63 had MIVEC valve timing & lift switching type on the intake only). A revised turbocharger offers up to 20-percent quicker response at lower engine speeds compared to previous 4G63. The 4B11T offers a broader torque curve, producing more torque than the 4G63 at all engine speeds, helped by the engine's square bore and stroke design (both measure 86.0 mm). Redline tachometer hashes start at 7,000 rpm, with a fuel cutout (true redline) at 7,600 rpm to protect the engine.

A semi-closed deck structure, an integrated ladder frame and four-bolt main bearing caps contribute to engine strength, durability, and lower NVH levels. Unlike the 4G63, the 4B11T does not use a balancer shaft. The semi-floating pistons of the 4G63 have been replaced with fully floating pistons for the 4B11T. Aluminium is also used for the timing chain case and cylinder head cover. The engine features an electronically controlled throttle, an isometric short port aluminium intake manifold, and the stainless steel exhaust manifold is positioned at the rear of the engine. The use of a direct-acting valvetrain eliminates the need of the roller rocker arm configuration previously used in the 4G63. The 4B11T features built-up hollow camshafts and its valve stem seals are integrated with the spring seats. The internal components of the 4B11T engine have been reinforced to withstand high levels of boost.

4B12

Specifications

Engine type	Inline 4-cylinder DOHC 16v, MIVEC
Displacement	2.4 L (2,359 cc)
Bore	88 mm
Stroke	97 mm
Compression ratio	10.5:1
Fuel system	ECI multiple
Peak power	125 kW (168 hp) at 6,000 RPM
Peak torque	Between 226 and 232 N⋅m (167 and 171 lb⋅ft) at 4,100 RPM depending on region.

Applications

• 2007 Mitsubishi Delica
• 2008 Mitsubishi Lancer
• 2008 Citroën C-Crosser
• 2008 Peugeot 4007
• 2009 Mitsubishi Lancer Sportback GTS
• 2009 Mitsubishi Lancer GTS
• 2009 Mitsubishi Outlander (Facelift Europe)
• 2010 Mitsubishi Galant
• 2013 Mitsubishi Lancer GT Manual
• 2015 Mitsubishi Lancer

Characteristics

The cylinder head intake and exhaust ports and intake and exhaust manifolds are shape optimized for better volumetric efficiency. Mitsubishi lowered the friction of the engine by including elastic grinding of the valve stems, adopting a high-efficiency shroud equipped plastic impeller in the water pump and using 0W-20 low-viscosity oil. Mitsubishi increased the combustion efficiency by optimizing the design of the cylinder head intake and exhaust ports, by incorporating the MIVEC system on both intake and exhaust valves and by using injectors that give an ultra micro droplet fuel spray. To lower the engine's weight, Mitsubishi used die-cast aluminium for the cylinder block, plastic for the cylinder head cover and intake manifold, and stainless steel for the exhaust manifold. The engine features a compact balancer shaft module with an integrated oil pump. A silent chain is used to drive the camshafts. The compact balancer module, the silent chain, the stable combustion yielded by the intake and exhaust MIVEC system, and high rigidity designs for the cylinder head and cylinder block realize low vibration and noise.

4B40

Specifications

Engine type	Inline 4-cylinder DOHC 16v, Turbo MIVEC
Displacement	1.5 L
Bore	-
Stroke	-
Compression ratio	-
Fuel system	Direct Injection
Peak power	163 PS (161 hp) at 5,500 RPM
Peak torque	250 N⋅m (184 lb⋅ft) at 1,800 to 4,500 RPM

Applications

• 2017 Mitsubishi Eclipse Cross

Characteristics

This all new(as for 2017) engine was developed in order to satisfy new performance, weight and ecological standards. The cars based on this engine demonstrate middle specs mostly typical for the city SUVs and CUVs. The strong side of that engine is the maximal torque, which is available in a range of 1,800 RPM up to 4,500 RPM.

See also

• Hyundai Theta engine - Hyundai's GEMA built engines
• Chrysler World engine - Chrysler's GEMA built engines
• List of Mitsubishi engines