Wikipedia:Requests for undeletion: Difference between revisions

Content deleted Content added

Inline

Revision as of 07:40, 21 September 2017

Welcome. Please note that this page is NOT for challenging the outcome of deletion discussions or to address the pending deletion of any page.

Shortcuts

Requests for undeletion is a process intended to assist users in restoring pages or files that were uncontroversially deleted via proposed deletion, under certain speedy deletion criteria (such as maintenance deletions or rejected Articles for creation drafts), or in deletion debates with little or no participation other than the nominator. This page is also intended to serve as a central location to request that deleted content be userfied, restored as a draft or emailed to you so the content can be improved upon prior to re-insertion into the mainspace, or used elsewhere (you may also make a request directly to one of the administrators listed here). This means that content deleted after discussion—at articles for deletion, categories for discussion, or miscellany for deletion among other deletion processes—may in some cases be provided to you, but such controversial page deletions will not be overturned through this process. Copyright violations and attack pages will not be provided at all.

This page is only for requesting undeletion of articles or files which have already been deleted. If the article you are concerned about is still visible, but has a warning message (template) at the top, please do not post here, but follow the instructions in the template or on your talk page. Please do not request that articles deleted under speedy deletion criteria A7, G4, G5 or G11 be undeleted here.

Note that requests for undeletion are not a replacement for deletion review. If you feel an administrator has erred in closing a deletion discussion or in applying a speedy deletion criterion, please contact them directly. If you discuss but are unable to resolve the issue on their talk page, it should be raised at Wikipedia:Deletion review, rather than here.

Instructions for special cases

G13. Abandoned Drafts and Articles for creation submissions – see Wikipedia:Requests for undeletion/G13 for instructions.

Please enter the page's title to request its undeletion:

Archives

This page has archives. Sections older than 7 days may be automatically archived by when more than 4 sections are present.

File:Arecibo Observatory Aerial View.jpg

File:Arecibo Observatory Aerial View.jpg · ( talk | logs | links | watch ) · [revisions]

The file was deleted as it was on commons but it has been deleted [1]. Can it be checked to see if suitable for refund locally? —KylieTastic (talk) 13:25, 10 September 2017 (UTC)[reply]

According to commons:Commons:Deletion_requests/File:Arecibo_Observatory_Aerial_View.jpg the file isn't public domain, therefore it would need permission from the photographer. Then again, it's available from a government website at https://www.nsf.gov/news/special_reports/astronomy/downloads.jsp so I can't say I understand the deletion rationale. If the rationale is valid, I have no idea how we'd tag the image if it were restored. ~Anachronist (talk) 20:57, 10 September 2017 (UTC)[reply]

That site's policies make it clear that they do not only host pictures that are works of the US government. —Kusma (t·c) 11:42, 15 September 2017 (UTC)[reply]

Draft:Rolling dominoes

Draft:Rolling dominoes · ( talk | logs | links | watch ) · [revisions]

I, Kjdominoes, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Kjdominoes (talk) 09:00, 13 September 2017 (UTC)[reply]

@Kjdominoes:

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 20:07, 15 September 2017 (UTC)[reply]

Draft:DNA Testing Choice

Draft:DNA Testing Choice · ( talk | logs | links | watch ) · [revisions]

I, TimBell1, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. TimBell1 (talk) 09:54, 13 September 2017 (UTC)[reply]

@TimBell1:

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 20:09, 15 September 2017 (UTC)[reply]

File:Jaydeep Sarangi image.jpg

File:Jaydeep Sarangi image.jpg · ( talk | logs | links | watch ) · [revisions]

OTRS permission received, ticket:2017091110019457. ——Guan aco 12:39, 13 September 2017 (UTC)[reply]

@Guanaco: For that OTRS permission to be valid, we need permission from the photographer, not the subject. That doesn't look like a self-portrait to me. Please clarify. ~Anachronist (talk) 16:55, 13 September 2017 (UTC)[reply]

@Anachronist: Always hard to tell without seeing the image for myself. Your assessment's good enough; no need to undelete unless the uploader resolves that. —Guan aco 18:06, 13 September 2017 (UTC)[reply]

@Anachronist: We've received a new, different permission statement. I can't see the file, but the statement itself seems fine. —Guan aco 20:42, 14 September 2017 (UTC)[reply]

@Guanaco:

Done, image restored and tagged. ~Anachronist (talk) 13:57, 15 September 2017 (UTC)[reply]

@Guanaco: and it's been moved to Commons at File:Jaydeep Sarangi.jpg. ~Anachronist (talk) 15:53, 18 September 2017 (UTC)[reply]

Thanks for your help. —Guan aco 19:43, 18 September 2017 (UTC)[reply]

Panayiotis Kalorkoti

Panayiotis Kalorkoti · ( talk | logs | history | links | watch | afd ) · [revisions]

Wikipedia Deletion policy states that ‘If in doubt as to whether there is consensus to delete a page, administrators normally will not delete it’. I do not believe there is consensus to delete. The reason for deletion of the Panayiotis Kalorkoti page is given as: ‘On the surface, the list of external links might suggest that this subject meets Wikipedia's notability guidelines. However, many of the links are just to catalogue entries. There appears to be a lack of significant coverage in reliable, independent sources here. There is a small amount of local news coverage, but I haven't been able to find much else. Cordless Larry (talk) 20:44, 14 August 2017 (UTC)’ And: ‘Weak delete. On the one hand, the three exhibition reviews in local newspapers meet WP:ARTIST standard 3. On the other hand, the article is plainly WP:PROMOTION driven by an SPA. I don't think Mr Kalorkoti is encyclopedic quite yet. Matt's talk 02:03, 15 August 2017 (UTC)’.

These statements may appear reasonable but are not correct. The Wikipedia page has not been updated and does not have accurate record of sources. There are reliable and independent sources. Some example:

British Council http://collection.britishcouncil.org/search/keywords:panayiotis-kalorkoti

Imperial War Museum http://www.iwm.org.uk/collections/search?query=Panayiotis+Kalorkoti&items_per_page=10

World Who’s Who http://www.worldwhoswho.com/views/browse.html?id=kal-0057

Northern Print http://www.northernprint.org.uk/whats-on/2014/03/01/panayiotis-kalorkoti-meet-the-artist.html

The Journal http://www.thejournal.co.uk/culture/theatre/the-female-form-4624776

Western Mail https://www.questia.com/article/1G1-81818041/an-artist-who-paints-in-poetry-exhibition-kalorkoti

Coventry Evening Telegraph https://www.questia.com/article/1G1-60434423/art-exhibitions-shedding-light-on-the-face-of-art

Linkedin https://uk.linkedin.com/in/panayiotis-kalorkoti-20853096

Gallery K http://www.gallerykcyprus.com/panayiotis-kalorkoti/

Saatchi Art https://www.saatchiart.com/PanKal

Artist Website www.kalorkoti.com

The ‘catalogue entries’ are supported by:

British Library http://explore.bl.uk/primo_library/libweb/action/search.do?dscnt=0&vl(174399379UI0)=any&frbg=&scp.scps=scope%3A%28BLCONTENT%29&tab=local_tab&dstmp=1330443506053&srt=rank&ct=search&mode=Basic&dum=true&tb=t&indx=1&vl(freeText0)=Panayiotis+Kalorkoti&vid=BLVU1&fn=search

National Art Library http://catalogue.nal.vam.ac.uk/ipac20/ipac.jsp?session=12I08G74940A7.42113&profile=nal&uri=link=3100006~!399385~!3100001~!3100002&aspect=subtab114&menu=search&ri=2&source=~!horizon&term=Kalorkoti%2C+Panayiotis%2C+1957-+--+Exhibitions&index=NAME#focus

Baltic Library & Archive http://balticplus.uk/?search=Panayiotis+Kalorkoti

Smithsoniam Institute Library http://collections.si.edu/search/results.htm?q=Kalorkoti+Panayiotis

Rijsmuseum Library https://library.rijksmuseum.nl/cgi-bin/koha/opac-search.pl?q=Panayiotis+Kalorkoti

New York Public Library https://browse.nypl.org/iii/encore/search/C__SPanayiotis%20Kalorkoti__Orightresult__U?lang=eng&suite=def

Yale University Research Library http://orbexpress.library.yale.edu/vwebv/search?searchArg=Panayiotis+Kalorkoti&searchCode=GKEY%5E*&limitTo=none&recCount=50&searchType=1&page.search.search.button=Search

National Library of Australia http://trove.nla.gov.au/book/result?q=subject%3A%22Kalorkoti%2C+Panayiotis%2C+1957-%22

Stedelijk Museum, Amsterdam https://www.pinterest.co.uk/pin/397513104580360977/

Heidelberg University Library http://katalog.ub.uni-heidelberg.de/cgi-bin/search.cgi?sprache=ENG&query=Panayiotis%20Kalorkoti&fsubmit=ok&quelle=homepage

I ask that the page is restored and updated to some or all of the links listed.

Many thanks.

Panayiotis Kalorkoti —2.25.61.64 (talk) 13:35, 13 September 2017 (UTC)[reply]

Declined for the time being. To put it bluntly, that is a vanity article, which existed solely for publicity purposes, primarily edited by you or your associates. Just because something qualifies for restoration due to the manner of its deletion, doesn't mean it should be restored in its current state. I could restore it to draft space for rewrite, under the condition that it be submitted for review via Wikipedia:Articles for creation and passes review, which should have been done in the first place due to the conflict of interest problems in the article. ~Anachronist (talk) 20:18, 15 September 2017 (UTC)[reply]

Undeletion request for the page.

The article was not primarily edited by me or my associates. I wish to make it clear that I do not know anyone who edited the article.

As admitted the article qualifies for restoration and I ask you to restore it so it can be edited and improved.

Many thanks. — Preceding unsigned comment added by 2.25.61.64 (talk) 10:00, 16 September 2017 (UTC)[reply]

We aren't stupid. The majority of edits in that article were by addresses in your IP address range as well as by a single-purpose-account "Pan67" who edited solely in behalf of the subject of that article. That's the majority of edits to the article. So what else should we conclude? I suggest greater transparency on your part. ~Anachronist (talk) 22:54, 16 September 2017 (UTC)[reply]

Undeletion request for the page.

I have been transparent and have made a reasonable request. I do not think you are stupid but you have made assumptions which are not correct. I repeat again that the article was not primarily edited by me or my associates. I do not know anyone who edited the article.

I ask you to restore it so it can be edited and improved. — Preceding unsigned comment added by 2.25.61.64 (talk) 09:41, 17 September 2017 (UTC)[reply]

So... The majority of edits are from your IP address range and a username that resembles your actual name, all editing in your behalf. The conclusion from that evidence is obvious.

In any case, I have seen no agreement to the conditions I offered in my first reply in this section. Do you agree to work on the article solely in draft space, and submit it for review, and refrain from making any substantive changes to the article once it is published in main space? ~Anachronist (talk) 15:28, 18 September 2017 (UTC)[reply]

Undeletion request for the page.

I have repeatedly stated that the article was not primarily edited by me or my associates and that I do not know anyone who edited the article or anything about any usernames. Your assumptions are not correct since I know nothing about other IP addresses. Also there has been no consensus to delete. The administrator Cordless Larry, who originally deleted the page, states on his page ‘The discussion at Wikipedia:Articles for deletion/Panayiotis Kalorkoti resulted in a delete outcome, but there wasn't much discussion, so you could put in a request at Wikipedia:Requests for undeletion, as stated at the top of the discussion page. Cordless Larry (talk) 13:46, 13 September 2017 (UTC)’

I ask you again to restore the page so it can be edited and improved by you or anyone else. Finally I wish to say that I have no intention of ‘making any substantive changes to the article once it is published in main space’. — Preceding unsigned comment added by 2.25.61.64 (talk • contribs) 16:33, 18 September 2017 (UTC)[reply]

Please note that I am not an administrator and did not delete the article. I am a regular editor and nominated it for deletion. Cordless Larry (talk) 18:53, 18 September 2017 (UTC)[reply]

Thank you. The article has been restored to Draft:Panayiotis Kalorkoti because it is unlikely to survive long in main space due to the prior deletion discussions. I have restored it to draft space subject to these conditions:

You or anyone associated with you may make substantial changes to the article in draft space only. Please add any prose and additional sources you mentioned above. This is an article about you, not a CV, so please refrain from including references or links to your own works. There should be references to significant coverage of you by reliable secondary sources that are independent of you.
The article must be submitted for review via Wikipedia:Articles for creation, and pass review, before moving it to main article space. A convenient submission box has been provided at the top of the draft article, to submit the article for review when you judge it ready.
You or anyone associated with you must refrain from making further substantial changes to the article after it is published in main article space. When published in main space, it is still acceptable for editors with a conflict of interest to make minor corrections to spelling, grammar, and numerical figures, as well as reverting obvious vandalism and adding more citations to reliable secondary sources.

Have at it. Please also note that draft articles are deleted after six months if there has been no editing activity. ~Anachronist (talk) 18:51, 18 September 2017 (UTC)[reply]

Template:WikiProject Systems/rater-data.js

Template:WikiProject Systems/rater-data.js · ( talk | logs | links | watch ) · [revisions]

This "Template" went uncontested at TfD on July 12 as an unused template. It is actually a JavaScript object to help User:Kephir/gadgets/rater determine the parameters of a WikiProject template (you can read more at User:Kephir/gadgets/rater/data-format). While the Systems WikiProject is only semi-active, this would still help sort articles that are of interest to the WikiProject if they ever become more active. Thanks, —menaechmi (talk) 17:30, 13 September 2017 (UTC)[reply]

@Fastily: It appears you deleted this template. Do you agree with the above rationale for restoration? ~Anachronist (talk) 20:20, 15 September 2017 (UTC)[reply]

Wikipedia talk:Articles for creation/Pop PHP Framework

Wikipedia talk:Articles for creation/Pop PHP Framework · ( logs | history | links | watch ) · [revisions]

I, Nicks3123, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Nicks3123 (talk) 18:39, 13 September 2017 (UTC)[reply]

Done, but see below. ~Anachronist (talk) 00:35, 16 September 2017 (UTC)[reply]

Pop PHP Framework

Pop PHP Framework · ( talk | logs | history | links | watch ) · [revisions]

I would like to revisit creating this page with better support —Nicks3123 (talk) 18:42, 13 September 2017 (UTC)[reply]

@Nicks3123: There is no deleted history to restore in that article. If it helps, I have restored the contribution history of Wikipedia talk:Articles for creation/Pop PHP Framework if that old content will be useful. ~Anachronist (talk) 20:24, 15 September 2017 (UTC)[reply]

Wikipedia talk:Articles for creation/Stevie Lynn Jones

Wikipedia talk:Articles for creation/Stevie Lynn Jones · ( logs | links | watch ) · [revisions]

I, ReferenceArticle, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. ReferenceArticle (talk) 00:31, 14 September 2017 (UTC)[reply]

@ReferenceArticle:

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 20:26, 15 September 2017 (UTC)[reply]

Draft:Ejembi John Onah

Draft:Ejembi John Onah · ( talk | logs | links | watch | mfd ) · [revisions]

Enter your reasoning here and then click the "Save page" button below —Ejembi12 (talk) 03:21, 14 September 2017 (UTC)[reply]

The article on the above subject; "draft Ejembi John Onah", was deleted by dodger67. After discussing the issue with dodger67 who deleted the article, he further forwarded the issue to Primefac who advised me to request for undeletion after review and detailed discussions on the matter. Please it would be appreciated if the article is undeleted so that it can be worked on before moving for review or to the article space, thanks It should be noted that the article was deleted initially via G4, later improved substantially and moved to draft space by Primefac before Dodger67 deleted it but all thesame both he and Primefac after detailed discussion, advised that undeletion should be requested. Thanks Ejembi12 (talk) 03:37, 14 September 2017 (UTC)[reply]

Ejembi12 (talk) 08:53, 14 September 2017 (UTC)[reply]

Comment The OP is misunderstanding/misrepresenting my and Primefac's opinions. Please see User talk:Dodger67#Re: Draft:Ejembi John Onah, Wikipedia:WikiProject Articles for creation/Help desk#03:29:14, 12 September 2017 review of submission by TerungwaSamuel and Wikipedia:Articles for deletion/Ejembi John Onah. The subject is simply a non-notable "run-of-the-mill" academic, but is very determined to have an article on WP. Roger (Dodger67) (talk) 11:34, 14 September 2017 (UTC)[reply]

Comment to further add to this, while I did suggest posting here, it was simply because the first request for undeletion, "talk to the deleting admin", was declined, and DRV is a great way to "put a nail in the coffin" as it were for continuous creation. That being said, I'm on-the-fence-leaning-towards-deletion for this draft; while I have yet to see any compelling evidence I am willing to be convinced that the subject could be notable. Primefac (talk) 13:08, 14 September 2017 (UTC)[reply]

The subject is distinguished Primefac and dodger67 being a chairman of a nano academy covering 189 countries with all global leaders of nano as members including several Nobel laureates which is more than being a chair of a Harvard or Cambridge University department since academies oversee universities and such institutions: Apart from that the subject has hundreds of citations from peer review journals from secondary source which alone proofs notability as in criterion 1 on notability by Wikipedia: "1. The person's research has made significant impact in their scholarly discipline, broadly construed, as demonstrated by independent reliable sources.To count towards satisfying Criterion 1, citations need to occur in peer-reviewed scholarly publications such as journals or academic books". The subject satisfies this criterion 1 as seen by many high impact peer review journal publications with many hundreds of citations, the subject is only required to proof 1 out of the 9 criteria on notability by wiki. Some of the citations from high impact peer review are pasted below: Reference 6 as in the article citations:

Very large list of publications

Original Article: Synthesis of Polyfluoroesters, Polyfluoroamic Acid, Polyfluoroimide, and Polyfluoroacrylates: Formation and Characterization of Their Ultrathin Films By Onah, Ejembi J. From Chemistry of Materials (2003), 15(21), 4104-4112. Language: English, Database: CAPLUS, DOI:10.1021/cm020728+

Cited By:

1. Self-organization and aggregation of amphiphilic block copolymers of N-vinylpyrrolidone-block-2,2,3,3-tetrafluoropropylmethacrylate at interfaces By Zamyshlyayeva, O. G.; Lapteva, O. S.; Baten'kin, M. A.; Semchikov, Yu. D.; Mel'nikova, N. B. From Russian Chemical Bulletin (2014), 63(8), 1823-1836. Language: English, Database: CAPLUS, DOI:10.1007/s11172-014-0672-x

The physicochem. characteristics of monolayer formation of amphiphilic block copolymers of N-vinylpyrrolidone-block-2,2,3,3-tetrafluoropropylmethacrylate (PVP-block-PFMA) with different mol. wts. (Mw) at the water-air interface and on the solid support (quartz, silicon) were studied. It was shown by UV and IR spectroscopy, anal. of the θ-S compression isotherms, and imaging by at. force microscopy (AFM) that the state of PVP-block-PFMA monolayers on the aq. subphase and solid support is detd. by the ratio of Mw of comonomer blocks Mw(PFMA)/Mw(PVP), the aggregation of copolymers in soln. and in the surface layer (surface micellation and phase isolation). Surface free energy of the films calcd. in the Wendt-Good-Kaelbly-Dan-Fowkes approxn. increases up to 30-33 mJ m-2 from 21 mJ m-2 (PFMA). The values of adhesion work Wadh (monolayer-water droplet-air) and Wadh (monolayer-water in octanol) and AFM imaging characterize the lipophilicity and surface topol. of the films as optimal for thromboresistant materials.

~1 Citing

2. Synthesis of UV-Writing fluorinated polymer for organic optical waveguide By Fei, Xu; Fan, Shuqi; Tian, Jing; Wang, Yi From Advanced Materials Research (Durnten-Zurich, Switzerland) (2013), 690-693, 1604-1608, 6 pp.. Language: English, Database: CAPLUS, DOI:10.4028/www.scientific.net/AMR.690-693.1604

UV-Writing Poly(FPS-co-GMA) for optical waveguide was synthesized and the refractive index of the polymer film was tuned in the range of 1.460∼1.555 at 1550 nm by mixing with bis-phenol-A epoxy resin. The film, which was made by spinning coated the Poly(FPS-co-GMA) with photo initiator, had good UV light lithograph sensitivity. The optical waveguides with very smooth top surface were fabricated from the resulting polymer by direct UV exposure and chem. development. The propagation losses of the channel waveguides were measured to be below 0.6 dB/cm at 1550 nm.

~0 Citings

3. Studies of fluorinated methylacrylate copolymer on the surface of cotton fabrics By Luo, Jun; Wu, Qing; Huang, Heng-chao; Chen, Jian-jun From Textile Research Journal (2011), 81(16), 1702-1712. Language: English, Database: CAPLUS, DOI:10.1177/0040517511410111

A fluorine-contg. methylacrylate copolymer latex has been synthesized by emulsion polymn. and was used as a water- and oil-repellent agent to treat some pure cotton woven fabrics at different dry and curing temp. The treated cotton fabric surfaces were investigated by attenuated total reflectance IR anal. and angle-dependent XPS directly. The anal. results could agree with the fluorine-contg. copolymer real situation on the fabrics surface much more, and could indicate, factually, surface properties of treated or modified material rather than copolymer film. It was found that fluorine elements are enriched at the air-polymer interface and fluorine content of the treated cotton fabrics surface decreases with increasing anal. depth, which depends on heating and cooling experience, such as annealing and quenching. Furthermore, the results showed that almost the same effect can be attained using this copolymer curing from 100°C to 175°C; the relatively low curing temp. is very valuable and advantageous for some fabrics which would yellow easily at higher temps. The water- and oil-repellency grade of treated cotton fabrics by the fluorine-contg. methylacrylate copolymer latex increases with an increase on fluorine content on the surface.

~8 Citings

4. Synthesis of photosensitive poly(methyl methacrylate-co-glycidyl methacrylate) for optical waveguide devices By Fei, Xu; Shi, Yuan; Cao, Yang From Applied Physics A: Materials Science & Processing (2010), 100(2), 409-414. Language: English, Database: CAPLUS, DOI:10.1007/s00339-010-5851-5

Photosensitive poly(MMA-co-GMA) for optical waveguide was synthesized, and the refractive index of the polymer film was tuned in the range of 1.481-1.588 at 1550 nm by mixing with bis-phenol-A epoxy resin. The film, which was made by spinning coated the poly(MMA-co-GMA) with photo initiator, had good UV light lithograph sensitivity, high glass transition temp. (Tg: 153°C, after crosslinking) and good thermal stabilities (Td: up to 324°C, after crosslinking). The optical waveguides with very smooth top surface were fabricated from the resulting polymer by direct UV exposure and chem. development. For waveguides with cladding, the propagation losses of the channel waveguides were measured to be below 3 dB/cm at 1550 nm.

~3 Citings

5. Fabrication of fluorinated polymer nanosheets using the Langmuir-Blodgett technique: characterization of their surface properties and applications By Aminuzzaman, Mohammod; Mitsuishi, Masaya; Miyashita, Tokuji From Polymer International (2010), 59(5), 583-596. Language: English, Database: CAPLUS, DOI:10.1002/pi.2761

A review describes the bottom-up design of ultra-thin fluorinated polymer films. Fluorinated polymer assemblies offer unique and application-oriented properties strongly correlated with surface chem. We focus on our recent topic of research, fluorinated polymer nanosheets, which are ultra-thin polymer films fabricated from amphiphilic fluorinated polyalkylacrylamides using the elegant Langmuir-Blodgett technique. These fluorinated polymer nanosheets have excellent hydrophobicity, extremely low surface energy and a low friction coeff. Therefore, fluorinated polymer nanosheets are attractive nanomaterials for surface modification in terms of tailoring of wettability, frictional properties, adhesion and surface chem. The nanocoating technique using reactive fluorinated polymer nanosheets and surface modification of hard disks and microchannels are also reviewed. Copyright © 2010 Society of Chem. Industry.

~5 Citings

6. Synthesis and Characterizations of Highly Fluorinated Poly(arylene ether)s for Quadratic Nonlinear Optics By Aljoumaa, Khaled; Qi, Yinghua; Ding, Jianfu; Delaire, Jacques A. From Macromolecules (Washington, DC, United States) (2009), 42(23), 9275-9288. Language: English, Database: CAPLUS, DOI:10.1021/ma900930q

New highly fluorinated poly(arylene ether sulfone)s (FPAES), poly(arylene ether ketone)s (FPAEK), and poly(arylene ether)s with several types of NLO chromophores as pendant groups were obtained by a polycondensation reaction using very mild conditions. The different polymer structures were designed with the objective to investigate the influence of both the polarity of the chromophore and the nature of the tether between the NLO chromophore and the chain. The resulting copolymers have glass transition temps. (Tg's) varying between 160° and 215°, and they are stable up to 280° under nitrogen. Although these copolymers are sol. in common org. solvents, cyclohexanone gave the best film quality and was used for the film prepn. After optimization of the poling conditions, the in situ second harmonic generation (SHG) measurements gave nonresonant values of the second-order susceptibilities d33 ranging from 2 to 8 pm/V, and the SHG signals of the poled polymer films were found to be thermally stable below 130°. Although being comparable with the values obtained for similar polymers and chromophores in the literature, d33 are smaller than those obtained for more conventional NLO polymers like PMMA-Disperse Red One (PMMA-DR1), which was taken as a ref. An unusual drop of the SHG signal during cooling was found in the thermally assisted orientation process. This drop occurred at a characteristic temp. below Tg. In this relaxation process which has never been obsd., intra- and interchain dipolar interactions are shown to play an important role, which is amplified in the case of chromophores which have their donor group embedded in the main chain, connected by two rigid tethers.

~15 Citings

7. Synthesis of a fluorinated photoresist for optical waveguide devices By Fei, Xu; Wan, Ying; Zhang, Haiming; Cui, Zhanchen; Zhang, Daming From Applied Physics A: Materials Science & Processing (2009), 96(2), 467-472. Language: English, Database: CAPLUS, DOI:10.1007/s00339-009-5280-5

A linear fluorinated bis-phenol-A novolac resin (LFAR) for optical waveguide was synthesized based on 4,4'-(hexafluoro-isopropylidene)diphenol, epoxy chloropropane and formaldehyde. Neg. fluorinated photoresist (FP) was made by composing the LFAR, di-Ph iodonium salt and solvent. The film, which was made by spin-coating FP, had good UV light lithograph sensitivity, large hardness and high glass transition temp. (Tg >170°, after crosslinking). Low-loss optical waveguides with very smooth top surface were fabricated from the resulting FP by direct UV exposure and chem. development. For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.21 dB/cm at 1550 nm.

~4 Citings

8. A simple approach toward low-dielectric polyimide nanocomposites: blending the polyimide precursor with a fluorinated polyhedral oligomeric silsesquioxane By Ye, Yun-Sheng; Yen, Ying-Chieh; Chen, Wen-Yi; Cheng, Chih-Chia; Chang, Feng-Chih From Journal of Polymer Science, Part A: Polymer Chemistry (2008), 46(18), 6296-6304. Language: English, Database: CAPLUS, DOI:10.1002/pola.22939

Pyromellitic dianhydride-4,4'-oxydianiline polyimide (PMDA-ODA) nanocomposites with low dielec. const. and good thermal properties were prepd. by blending the polyimide precursor with fluorinated polyhedral oligomeric silsesquioxane, octakis(dimethylsiloxy-hexafluoropropyl) silsesquioxane (OF). The low polarizability of OF is compatible with polyimide matrix, such that it can improve the dispersion and free vol. of the resulting composites. Together, the higher free vol. and lower polarizability of OF are responsible for the lower dielec. const. of the PI-OF nanocomposites. This simple method for enhancing the properties of polyimides has applicability in the electronics industry.

~32 Citings

9. Fabrication and structural analysis of aromatic polyimide ultra-thin films with different fluorine contents By Kang, Yun Ji; Kim, Hwajeong; Kim, Eunju; Kim, Il; Ha, Chang-Sik From Colloids and Surfaces, A: Physicochemical and Engineering Aspects (2008), 313+314, 585-589. Language: English, Database: CAPLUS, DOI:10.1016/j.colsurfa.2007.05.048

The structural characterizations of arom. polyimide (PI) ultra-thin films with different fluorine contents were studied. Three types of polyamic acid (PAA) were produced from polymn. of biphenyl dianhydride (BPDA)/4,4'-oxydianiline (ODA), BPDA/2,2'-bis(trifluromethyl)benzidine (TFDB), and 4,4'-(hexafluoro isopropylidene)-diphthalic anhydride (6FDA)/TFDB in N,N-dimethylacetamide (DMAc). Polyamic acid alkyl salts (PAAS) using O,O',O-trihexadecanoyl-triethanolamine were transferred onto a Si-wafer substrate to prep. Langmuir-Blodgett (LB) films. The behaviors of PAAS monolayers at the air/water interface were confirmed with π-A isotherms and Brewster Angle Microscopy (BAM) images. The behaviors of PAAS monolayers at the air/water interface depend on the fluorine contents. As there is more fluorine in the main chain of PAAS, the area per mol. of each monolayer was increased. The structure of PAAS LB films with 10, 20, 30, and 40 layers on a substrate were investigated by UV-vis spectroscopy, X-ray diffraction (XRD), X-ray reflectivity, and IR spectroscopy. The obtained PAAS LB films were imidized with a thermal treatment at 300°. The imidization of PI ultra-thin film was identified by IR spectrum. At. force microscopy (AFM) images showed that the particle size of PI ultra-thin films on a Si-wafer were about 7-25 nm.

~0 Citings

10. New side-chain fluorinated copolymers for quadratic non linear optics By Aljoumaa, Khaled; Ishow, Elena; Ding, Jianfu; Qi, Yinghua; Day, Michael; Delaire, Jacques A. From Nonlinear Optics, Quantum Optics (2006), 35(1-3), 83-93. Language: English, Database: CAPLUS

Highly fluorinated poly(arylene ether ketone)s and poly(arylene ether sulfone)s contg. efficient second order NLO chromophores covalently linked as side-chain groups were synthesized using a polycondensation reaction. The glass transition temps. of these copolymers were found between 163°C and 197°C. Second Harmonic Generation (SHG) coeffs. (d33) of the poled polymer films (corona poling, voltage 5 kV) reached values of about 14 pm·V-1 at 1907 nm fundamental wavelength. No appreciable decay of the SHG signal was obsd. below 130°C. These new copolymers allow a compromise to be reached between high transparency at telecommunication wavelengths (assocd. with the replacement of most of CH bonds by CF bonds), good SHG efficiency and acceptable thermal stability of the dipole orientation.

~1 Citing

11. Cross-linkable highly halogenated poly(arylene ether ketone/sulfone)s with tunable refractive index: Synthesis, characterization and optical properties By Qi, Yinghua; Ding, Jianfu; Day, Michael; Jiang, Jia; Callender, Claire L. From Polymer (2006), 47(25), 8263-8271. Language: English, Database: CAPLUS, DOI:10.1016/j.polymer.2006.09.065

A series of novel cross-linkable, highly halogenated poly(arylene ether ketone)s (HPAEKs) and poly(arylene ether sulfone)s (HPAESs) with different bromine contents have been designed and prepd. by polycondensation reactions for use as optical waveguide materials. The method used for their prepn. involved reacting decafluorodiphenyl ketone/sulfone (DFPK/DFPS) with a mixt. of 4,4'-isopropylidene bis(2,6-dibromophenol) (4Br-BPA), 4,4'-(hexafluoroisopropylidene)diphenol (6F-BPA), and 1,1-bis(4-hydroxyphenyl)ethyl-1-Ph 2,3,5,6-tetrafluorostyryl ether (BHPFS). The feed ratio of 4Br-BPA to the total bisphenols varied from 0 to 80 mol.%, while that of BHPFS remained at 20% for all polymers. The resulting polymers have excellent soly. in most common org. solvents such as THF, cyclohexanone and N,N-dimethylacetamide (DMAc) and can be easily cast into optical-quality thin films. A high glass transition temp. in the range of 164-206 °C was found for these polymers, which could be further increased by about 20 °C upon thermal or photochem. crosslinking. Slab and channel waveguides have been prepd. from these polymers. All of them exhibited low optical loss (0.4-0.6 dB/cm) at the telecommunication wavelength of 1550 nm. Due to the relatively higher polarizability of the C-Br bond than that of the C-H bond, an increase in the refractive index was obsd. as the bromine content in the polymers increased. Consequently, the refractive index of HPAEKs and HPAESs can be readily adjusted within a wide range from 1.51 to 1.57 by simply changing the ratio of the bromine-contg. bisphenol in the feed. This variability, along with the excellent crosslinking capability, allows these polymers to be used as both the core and the cladding materials for the waveguide device fabrication and provides a greater flexibility in the design of device structures.

~24 Citings

12. Synthesis and properties of low-dielectric-constant polyimides with introduced reactive fluorine polyhedral oligomeric silsesquioxanes By Ye, Yun-Sheng; Chen, Wen-Yi; Wang, Yen-Zen From Journal of Polymer Science, Part A: Polymer Chemistry (2006), 44(18), 5391-5402. Language: English, Database: CAPLUS, DOI:10.1002/pola.21650

A high-performance, low-dielec.-const. polyimide (PI) nanocomposite from poly(amic acid) (PAA) cured with a reactive fluorine polyhedral oligomeric silsesquioxane (POSS) isomer was successfully synthesized. The features of this reactive fluorine POSS isomer [octakis(dimethylsiloxyhexafluoropropylglycidyl ether)silsesquioxane (OFG)] provided two important approaches (contg. fluorine or being porous in the polymer matrix) of reducing the dielec. const. of PI. This reactive POSS isomer had an av. of four epoxy groups and four fluorine groups on the POSS cage, and the epoxy groups could be cured with PAA to form a network framework of a PI/POSS nanocomposite. The PI/OFG nanocomposite had a high crosslinking d., high porosity (24.3%), high hydrophobicity, and low polarizability. These properties enhanced the thermal (glass-transition temp. ∼ 362 °C) and dielec. (dielec. const. ∼2.30) properties of PI more than other POSS derivs. introduced into the PI backbone. A large no. of small POSS particles (<10 nm) were embedded inside the PI matrix when the OFG content was low, whereas interconnected POSS aggregation domains were obsd. when the OFG content was high.

~46 Citings

13. Nanofilms and the emerging nanotechnology By Onah, Ejembi J. From ACS Symposium Series (2006), 918(Polymeric Nanofibers), 384-398. Language: English, Database: CAPLUS, DOI:10.1021/bk-2006-0918.ch027

Nanofilms or nanofiber of fluorine contg. polymers hold a central position in the emerging nanotechnol. because of their unique properties such as low permittivity, low friction, thermal stability, high resistance to chem. attacks esp. oxidn. The important areas where fluorine contg. polymer films hold a lot of promise are biomedical applications, resist technol. in photo and radiation lithogs. as well as insulators or dielecs. in the emerging field of nanoelectronics. Fluorine contg. polymers, specifically fluoropolyimides, fluoropolyamic acids, and fluoropolyacrylates have been synthesized and their soly. in wide range of solvents was established. Their Langmuir-Blodgett (LB) monolayers (polymer as film on the water surface or single mols. arranged on the substrate) and their ultrathin films (monolayers deposited on the substrate as thin films in nanometer range) have been fabricated. Techniques like AFM, surface plasmon resonance (SPR), and dielec. spectroscopy have been used to obtain the surface morphol., film thickness and dielec. const. The dielec. const. of 1.5 was measured for polyimide and it is the lowest const. so far reported in the published literature.

~2 Citings

14. Effects of O2 and N2 plasma treatment on 6FDA-BisAAF fluorine-contained polyimide By Yang, Ching-Yu; Chen, J. S.; Hsu, Steve Lien-Chung From Journal of the Electrochemical Society (2006), 153(6), F120-F125. Language: English, Database: CAPLUS, DOI:10.1149/1.2193402

In this work, surface modification of 6FDA-BisAAF fluorine-contained polyimide by O2 or N2 plasma was carried out and material characteristics of the surfaces after plasma treatment were investigated. XPS anal. reveals that O2 plasma reacts with carbon atoms in the polyimide structure to form C-O bonding on the surface and destroys the polymer structure. Reactions between nitrogen and fluorine are thermodynamically favorable during the N2 plasma treatment and result in a significant defluorination on the surface and an increase of water absorption. The polyimides, with or without plasma treatment, were made into a metal-insulator-silicon structure to investigate its current leakage characteristics. From the current-voltage (I-V) measurement, the N2 plasma treated sample reveals a greater leakage current than that of the untreated and O2 plasma treated sample. The unstable bonds created by the N2 plasma treatment may adsorb more H2O mols. and degraded elec. characteristics.

~8 Citings

15. In situ second harmonic generation measurements of poled fluorinated polymer films By Aljoumaa, Khaled; Ishow, Elena; Ding, Jianfu; Qi, Yinghua; Day, Michael; Delaire, Jacques A. From Proceedings of SPIE-The International Society for Optical Engineering (2006), 6192(Organic Optoelectronics and Photonics II), 619214/1-619214/9. Language: English, Database: CAPLUS, DOI:10.1117/12.662834

New fluorinated poly(arylene ether sulfone)s (FPAES) and poly (arylene ether ketone)s (FPAEK) with two types of NLO chromophores as pendant groups were obtained by a polycondensation reaction carried out using very mild reaction conditions. The glass transition temp. (Tg) of these copolymers is between 168 and 190°C. The SHG intensity was measured during thermal corona poling : the dipole orientation starts at 100°C, and reaches a max. at 160°C, which is lower than Tg. During cooling of the film under the applied elec. field, we obsd. an unusual drop of the SHG intensity starting at 120°C and reaching 70 % of the max. value. The phys. origin of this drop has been investigated and is possibly attributable to a secondary phase transition of the copolymers. Despite this decrease, d33 coeffs. measured after poling vary between 2 and 15 pm/V at 1907 nm fundamental wavelength, depending on the first hyperpolarizability of the NLO chromophore. The dipole orientation of all these copolymers is very stable provided the temp. of the films is kept below the temp. threshold of 120°C, which is below the Tg of the polymers.

~0 Citings

16. Investigation of the role of perfluoromethyl structure in fluorine-containing polyimides during different plasma modification By Yang, Ching-Yu; Hsu, Steve Lien-Chung; Chen, J. S. From PMSE Preprints (2006), 94, 244-245. Language: English, Database: CAPLUS

In this work, four kinds of polyimides, with and without perfluoromethyl side groups, were synthesized from 6FDA, 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) and 2,2-bis(4-aminophenyl)hexafluoropropane (BisAAF), p-phenylenediamine (PPD). Properties such as compn., thermal decompn. temp., surface bonding states, gas desorption behavior, and elec. properties were investigated using elemental anal., Fourier transform IR spectrometry (FTIR), thermogravimetric analyzer (TGA), XPS, thermal desorption spectroscopy (TDS) current-voltage (I-V) and capacitance-voltage (C-V) measurements. From the results of the TGA anal., the decompn. temp. is with the sequence of BPDA-PPD > BPDA-BisAAF > 6FDA-PPD > 6FDA-BisAAF. The fragments of these polyimides during thermal degrdn. are measured by TDS anal. The effects of perfluoromethyl structure in dianhydride and diamine are also discussed. The elec. properties of these polyimides after plasma treatment are also investigated. Relationships between plasma treatment and polyimide structure and surface bonding configuration are discussed.

~0 Citings

17. Synthesis and characterization of copolymers based on styrene and partially fluorinated acrylates By Saidi, Salima; Guittard, Frederic; Guimon, Claude; Geribaldi, Serge From European Polymer Journal (2006), 42(3), 702-710. Language: English, Database: CAPLUS, DOI:10.1016/j.eurpolymj.2005.09.012

Copolymers of styrene and fluorinated acrylate monomers with F-octylalkyl, F(CF2)8(CH2)n, side groups were prepd. by free radical polymn. Thermal behavior of the resulting polymers was investigated by DSC and TGA. Even if at the macroscopic scale the polymers surfaces are homogeneous and clear, the anal. indicates that all samples exhibit two glass transitions temps. This discontinuity may be regarded as an indication for microphase sepn. of fluorine-rich and polystyrene-rich microphases. Water and hexadecane contact angles measurements show that these polymers are quite surface active in the solid state. Surface and bulk organizations were investigated by XPS anal. A strong correlation between bulk organization and surface properties of the polymers could be established. Preferential adsorption of fluorinated segments at the material surface were more pronounced than expected in the bulk.

~40 Citings

18. Morphology and microstructure of core-shell hybrid latexes containing fluoropolymer and acrylic copolymer By Chen, Su; Yan, Weicai; Chen, Li; Chen, Yongjun; Xu, Nanping From Colloid and Polymer Science (2006), 284(4), 413-421. Language: English, Database: CAPLUS, DOI:10.1007/s00396-005-1404-4

Novel core-shell hybrid latex composed by two immiscible polymers has been prepd. For the first time, we utilized fluoropolymer (FKM-40) as the core while polyacrylates as the shell in this latex, leading two immiscible components mixable under micro-mol. scale. To det. the chem. structure, in particular the miscibility between the core and the shell in this hybrid, transmission electron microscopy (TEM), attenuated total reflection Fourier transform IR (ATR-FTIR) spectroscopy, and FTIR imaging have been performed. All expts. indicate that FKM-40 mixed well with polyacrylates, particularly FTIR image demonstrated unambiguously that FKM-40 dispersed, under micro-mol. scale, in continuous polyacrylates at a concn. of 20%. Further morphol. (X-ray diffraction) investigations suggest that the hybrid latex had a less cryst. domain for samples with a lower concn. of FKM-40. Interestingly, we found that the water contact angle and the water absorption of the core-shell hybrid can be readily adjustable by varying the proportion of each species during copolymn. Finally it is worth mentioning that the core-shell methodol. as demonstrated herein is superior to phys. blending with regard to its capability of achieving copolymer system under micro-mol. miscibility.

~6 Citings

19. Langmuir-Blodgett Films of Preformed Polymers Containing Biphenyl Groups By Davis, Frank; Hodge, Philip; Tredgold, Richard H.; Ali-Adib, Ziad From Langmuir (2005), 21(20), 9199-9205. Language: English, Database: CAPLUS, DOI:10.1021/la051011e

	Polymers contg. maleic anhydride and biphenyl liq. crystal groups were prepd. and the structure of mono- and multilayers was studied.  Polysulfone materials having the biphenyl mesogenic group were also studied.  The polymers gave steep isotherms with high collapse pressure, indicating good packing of the monolayers, and could be deposited to form thick LB multilayers.  X-ray diffraction showed that an ordered multilayer was formed, and the effects of chem. compn. on the structure of the LB films were elucidated.  The dominant factor in monolayer structure is the nature of the polymer backbone rather than that of the liq. crystal side chains.

~2 Citings

20. Photofabrication of surface relief gratings from azobenzene containing perfluorocyclobutane aryl ether polymer By Chun, Chaemin; Ghim, Jieun; Kim, Mi-Jeong; Kim, Dong Yu From Journal of Polymer Science, Part A: Polymer Chemistry (2005), 43(16), 3525-3532. Language: English, Database: CAPLUS, DOI:10.1002/pola.20812

An azobenzene based perfluorocyclobutane (PFCB) aryl ether polymer, poly[4-(phenylazo)triphenylamine-1,2-hexafluorocyclobutyl ether], was synthesized by Pd catalyzed amination and the 2π + 2π cyclodimerization of 4-[(trifluorovinyl)oxy]bromobenzene. The polymer was designed and synthesized to incorporate azo chromophores into the structure to effect photoinduced dynamic response of PFCB. The polymer exhibited Tg of about 122° and max. absorption of the azo chromophores at 407 nm. A thin film was prepd. through spin coating and a fast increase of diffraction efficiency was achieved by irradn. with an interference beam. The efficient formation of holog. surface relief gratings was verified from AFM images, which show regularly defined and aligned grating structures.

~22 Citings

21. Fluorine-containing polymers and the emerging nanotechnology By Onah, Ejembi John From Polymer News (2005), 30(3), 79-84. Language: English, Database: CAPLUS

Fluorine-contg. polymers, because of their unique properties, including: low permittivity, low friction, thermal stability, high resistance to chem. attack (esp. oxidn.), hold a central position in the emerging nanotechnol. Important areas where fluorine contg. polymers hold a lot of promise are: resist technol. in photo and radiation lithogs. as well as insulators in an emerging "nanoelectronics.". Fluorine-contg. polymers (specifically fluoropolyimide, fluoropolyamic acid, fluoroimide-amide and fluoropoly acrylates) have been synthesized. The polymers are sol. in a wide range of solvents. Their Langmuir-Blodgett (LB) monolayers and their ultrathin films have been fabricated. Techniques like AFM, surface plasmon resonance (SPR), reflection absorption IR spectroscopy (RAIR), and dielec. spectroscopy have been used to obtain the surface morphol., film thickness, orientation on the substrate, and dielec. const. The dielec. const. of 1.5 is the lowest so far reported according to my knowledge.

~0 Citings

22. Cross-Linkable Highly Fluorinated Poly(Arylene Ether Ketones/Sulfones) for Optical Waveguiding Applications By Qi, Yinghua; Ding, Jianfu; Day, Michael; Jiang, Jia; Callender, Claire L. From Chemistry of Materials (2005), 17(3), 676-682. Language: English, Database: CAPLUS, DOI:10.1021/cm048587u

	Novel cross-linkable, highly fluorinated poly(arylene ether ketones/sulfones) have been prepd. by copolycondensation reactions of perfluorinated arom. ketone/sulfone with 4,4'-(hexafluoroisopropylidene)diphenol and a tetrafluorostyrol-contg. bisphenol (i.e., 1,1-bis(4-hydroxyphenyl)ethyl-1-Ph 2,3,5,6-tetrafluorostyrol ether).  The reactions were conducted at low temp. in the presence of calcium hydride and cesium fluoride.  The resulting polymers have no.-av. mol. wts. in the range of 25,000-36,000, excellent solubilities in common org. solvents, high glass transition temps. (Tg) in the region of 150-185°, and good thermal stabilities (Td up to 480°).  Tough, flexible, and transparent thin films of these polymers can be readily prepd. by both soln. casting and spin-coating.  By adjusting the feed ratio of monomers, the refractive index and crosslinking d. of the polymers can be readily controlled.  Crosslinking of these polymers has been demonstrated by both thermal heating and UV irradn.  The cross-linked polymer thin films exhibit low optical loss (∼0.5 dB/cm) and low birefringence (∼2 × 10-3) at 1550 nm, demonstrating that they are promising candidates for optical waveguide materials.

~70 Citings

Reference 7 as in the article citations: Original Aricle: Synthesis and characterization of triglyceride-based polyols and tack-free coatings via the air oxidation of soy oil By Fornof, A. R.; Onah, E.; Ghosh, S.; Frazier, C. E.; Sohn, S.; Wilkes, G. L.; Long, T. E. From Journal of Applied Polymer Science (2006), 102(1), 690-697. Language: English, Database: CAPLUS, DOI:10.1002/app.24327 Cited By:

1. Synthesis of PNIPAM-PEG Double Hydrophilic Polymers Using Oleic Acid Macro Peroxide Initiator By Hazer, Baki; Ayyildiz, Elif; Bahadir, Faruk From Journal of the American Oil Chemists' Society (2017), 94(9), 1141-1151. Language: English, Database: CAPLUS, DOI:10.1007/s11746-017-3020-0

This work refers to the synthesis of a new double hydrophilic thermo-responsive polymer using fatty acid macroperoxide initiator, N-iso-Pr acryl amide (NIPAM) and polyethylene glycol with two primary amine ends (PEGNH2). For this purpose, oleic acid was spread out onto a petri dish and exposed to air oxygen at room temp. for 2 mo. The obtained fatty acid macro-peroxide initiator was used in the free radical polymn. of NIPAM in the presence of PEGNH2. Poly oleic acid-g-PNIPAM-g-PEG graft copolymers were successfully obtained. Lower crit. soln. temp. (LCST) of the graft copolymer was detd. by using UV-Vis spectrometry with a sensible heating unit. Morphol. of the fractured surface of the double hydrophilic polymers was visualized by using SEM micrographs. Graft copolymers with LCST close to body temp. were obtained by changing PEG inclusion. Structural characterization, thermal anal. and size exclusion chromatog. measurements of the obtained products were done.

~0 Citings

2. Synthesis, properties, and applications of hybrid polyurethane-urea obtained from air-oxidized soybean oil By Ourique, Pedro A.; Krindges, Israel; Aguzzoli, Cesar; Figueroa, Carlos A.; Amalvy, Javier; Wanke, Cesar H.; Bianchi, Otavio From Progress in Organic Coatings (2017), 108, 15-24. Language: English, Database: CAPLUS, DOI:10.1016/j.porgcoat.2017.04.002

This study explores the synthesis of hybrid polyurethane (PU)-urea obtained from air-oxidized soybean oil. The effect of the oxidn. time of the soybean oil on the prodn. of soy poliol and hybrid PU-urea films employing (3-aminopropyl) trimethoxysilane was investigated. Soybean polyols and hybrid PU-urea materials were characterized by various techniques such as 1H and 29Si NMR, Fourier transform IR spectroscopy (FTIR), gel-permeation chromatog. (GPC), gel content, SEM(SEM), wide-angle X-ray diffraction (WAXD), synchrotron small-angle X-ray scattering (SAXS), contact angle, and glow-discharge optical emission spectroscopy. Furthermore, the physicomech. properties of the materials were characterized and their corrosion resistance was detd. The produced ecofriendly materials exhibited a dependency of the hybrid network on the degree of gel content. The phase morphol. developed during the polymn. reaction influences the size of hard domains and their organization. This study provides a direct relation between the corrosion resistance and material hydrophobicity and the nature of the heterogeneity of the phase morphol. formed during one-step polymn. procedure.

~0 Citings

3. Silylation of Non-Terminal Double Bonds of Natural Oils By Tambe, Chetan; Dewasthale, Sudhanwa; Shi, Xiangke; Graiver, Daniel; Narayan, Ramani From Silicon (2016), 8(1), 87-98. Language: English, Database: CAPLUS, DOI:10.1007/s12633-015-9299-2

Silylation of non-terminal double bonds of unsatd. fatty acids with reactive organosilicons was successfully accomplished using the 'Ene' reaction route. The 'Ene' reaction, which is a subset of the famous Diels Alder reaction, enables grafting of vinyl silanes onto unsatd. org. mols. irresp. of the position of the double bond. This procedure was used to graft vinyltrialkoxysilanes onto unsatd. fatty acids of various triglyceride oils. Me oleate and Me stearate were used as model compds. to investigate this reaction. 1H NMR and TGA were used to characterize the structure of the silylation products and to det. the extent of grafting as a function of reaction conditions. It was found that this grafting reaction follows a second order kinetics. Under extreme conditions a silyl-ester redistribution reaction can also occur where an alkoxy group attached to the silicon atom is exchanged with an alkoxy group of the org. ester. Grafting vinyltrimethoxysilane onto natural oils such as soybean, canola and Abyssinian oils leads to a convenient one-component, moisture activated cure system of these natural oils.

~0 Citings

4. Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends By Ourique, Pedro A.; Gril, Jerome M. L.; Guillaume, Gaelle W.; Wanke, Cesar H.; Echeverrigaray, Sergio G.; Bianchi, Otavio From Journal of Applied Polymer Science (2015), 132(24), 42102/1-42102/8. Language: English, Database: CAPLUS, DOI:10.1002/app.42102

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepd. by air oxidn. reactions and blending with PVC. The oxidn. reaction produced a significant increase in the no. of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the no. of polar groups, such as hydroxyls, and thus a redn. in the amt. of atactic polymer was obsd. Furthermore, an increase in the mol. wt. of the oxidized oil, as well as large amts. of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the cryst. phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42102.

~1 Citing

5. Vegetable oil based eco-friendly coating materials: A review article By Alam, Manawwer; Akram, Deewan; Sharmin, Eram; Zafar, Fahmina; Ahmad, Sharif From Arabian Journal of Chemistry (2014), 7(4), 469-479. Language: English, Database: CAPLUS, DOI:10.1016/j.arabjc.2013.12.023

A review. Vegetable oils (VO) constitute the single, largest, easily available, low cost, non-toxic, non-depletable, biodegradable family yielding materials that are capable of competing with fossil fuel derived petro-based products. The outstanding feature of VO is their unique chem. structure with to unsatn. sites, epoxies, hydroxyls, esters and other functional groups along with inherent fluidity characteristics. These enable them to undergo various chem. transformations producing low mol. wt. polymeric materials with versatile applications, particularly as chief ingredients in paints and coatings. In this manuscript, we have briefly described important VO derived materials such as alkyds, polyesteramides, polyetheramides, polyurethanes, epoxies, polyols, along with their prepn. and applications as protective coatings. A small portion of the review is also dedicated to the future perspectives in the field. Inspite of their extensive utilization in the world of coatings, literature survey revealed that in the past (from 1990s to date) no review has come up describing the chem. and applications of VO polymer based coating materials.

~54 Citings

6. Soy in rubber for the automotive industry By Beyer, Laura D.; Flanigan, Cynthia M.; Klekamp, David; Rohweder, David From Gummi, Fasern, Kunststoffe (2013), 66(9), 595-602. Language: German, Database: CAPLUS

Elastomers play an important role in the automotive industry, as they are used in a wide range of applications ranging from power-train mounts to door seals to tires. Opportunities exist to improve the sustainability of rubber components by replacing a portion of the petroleum processing oil in rubber formulations with soy-based oils. Two case studies are presented, which demonstrate the potential for enhanced performance properties obtained by using soybean oil. In the first, 10 phr of paraffinic processing oil in EPDM formulations is replaced with soybean oil, epoxidized soybean oil and soy polyol of varying hydroxyl functionality. In the second case study, 10 phr of the naphthenic processing oil in SBR/BR compds. is replaced with soybean oil, epoxidized soybean oil, and soy polyol. The effects of the soy-based oils on cure kinetics, phys. and viscoelastic properties were examd.

~1 Citing

7. Vegetable oil thermosets reinforced by tannin-lipid formulations By Luo, Chunhua; Grigsby, Warren J.; Edmonds, Neil R.; Al-Hakkak, Jafar From Acta Biomaterialia (2013), 9(2), 5226-5233. Language: English, Database: CAPLUS, DOI:10.1016/j.actbio.2012.08.048

Totally bio-based thermosetting polymers which are comparable to synthetic polyester thermosets have been prepd. from copolymn. of condensed tannin-fatty acid esters with vegetable oils. Oxidative copolymn. of tannin linoleate/acetate mixed esters with linseed oil and tung oil produced polymer films ranging from soft rubbers to rigid thermosets. Tannin incorporation into the formulations was essential for the final product to achieve necessary mech. strength. Films had ambient modulus values between 0.12 and 1.6 GPa, with glass transition temps. ranging from 32 to 72 °C and calcd. crosslink densities of 1020-57,700 mol m-3. Film stiffness, Tg and crosslink d. increase with greater tannin linoeate/acetate content due mainly to this tannin component providing rigidity through polyphenolic arom. rings and unsatd. chains as crosslinking sites.

~9 Citings

8. Aging of biodegradable oils and assessment of their suitability for high voltage applications By Hosier, I. L.; Guushaa, A.; Westenbrink, E. W.; Rogers, C.; Vaughan, A. S.; Swingler, S. G. From IEEE Transactions on Dielectrics and Electrical Insulation (2011), 18(3), 728-738. Language: English, Database: CAPLUS, DOI:10.1109/TDEI.2011.5931059

In many items of high voltage plant, a mineral or synthetic oil is used in conjunction with paper as the dielec. medium. However, increasing awareness of the environmental impact of human activity and increasing disposal costs have encouraged researchers to direct their attention to renewable and biodegradable alternatives. Originally used in capacitors, vegetable oils are now finding widespread use in some transformer installations, particularly in the United States. Therefore, it seems prudent to begin systematic investigations of the aging behavior of a no. of vegetable based oils and assess their potential for application in high voltage systems. A total of five food grade vegetable oils, an oil specifically formulated for high voltage applications (Envirotemp FR3) and dodecylbenzene (DDB) were aged at various temps. in air. Their aging behavior was assessed by ultra-violet/visible, IR and dielec. spectroscopies supplemented with measurements of viscosity. It was found that olive oil offered excellent resistance to aging (comparable to Envirotemp oil), rapeseed oil offered intermediate properties whereas corn and sunflower oil oxidized appreciably after aging. Despite being more prone to oxidn., all the vegetable oils offered dielec. properties which were better than dodecylbenzene and similar to mineral oil.

~6 Citings

9. Effect of vegetable-based polyols in unimodal glass-transition polyurethane slabstock viscoelastic foams and some guidance for the control of their structure-property behavior. I By Vaughan, Benjamin R.; Wilkes, Garth L.; Dounis, Dimitrios V.; McLaughlin, Cam From Journal of Applied Polymer Science (2011), 119(5), 2683-2697. Language: English, Database: CAPLUS, DOI:10.1002/app.32865

We studied the synthesis and structure-property behaviors of two types of vegetable-oil polyols (soy oil and castor oil) and their use in viscoelastic (VE) polyurethane foams (PUFs). This article is the first in a two-part series. In this initial part, we principally address the dynamic mech. anal. (DMA) behavior of these foams in conjunction with information on the cellular morphol., sol fraction, and rise and reaction temp. profile behavior (the latter two parameters were detd. during the foaming process). Particular emphasis is placed on the DMA damping characteristics, which represent one of the most crit. parameters in the application of VE PUFs. The damping characteristics could be modified in such foams by the variation of the isocyanate/hydroxyl (×100) index, the addn. of plasticizer, and in the case of soy polyols, the soy content. The frequency dependence of the VE PUFs is also briefly addressed. In the second article in this series, which directly follows this article, we further address the details of other relevant phys. properties of these same foams in view of their applied nature.

~4 Citings

10. Plant Oils as Platform Chemicals for Polyurethane Synthesis: Current State-of-the-Art By Lligadas, Gerard; Ronda, Juan C.; Galia, Marina; Cadiz, Virginia From Biomacromolecules (2010), 11(11), 2825-2835. Language: English, Database: CAPLUS, DOI:10.1021/bm100839x

	A review.  Plant oils are already one of the most important platform chems. for the chem. industry due to its universal availability, inherent biodegradability, and low price.  Nowadays, plant oils are already a com. source of multifunctional monomers and oligomers for polyurethane synthesis, and the design of novel biobased polyols derived from them is an active area of research.  By taking advantage of the wide variety of possibilities for chem. modification of plant oils, there is a broad palette of strategies to functionalize its structure with hydroxyl groups.  The purpose of this review is to comprehensively overview recent developments on the prepn. of biobased polyols from plant oils.

~184 Citings

11. Oxidation of unsaturated fatty acid derivatives and vegetable oils By Koeckritz, Angela; Martin, Andreas From European Journal of Lipid Science and Technology (2008), 110(9), 812-824. Language: English, Database: CAPLUS, DOI:10.1002/ejlt.200800042

The present review reports the current literature of the last 10 years on selective oxidn. reactions of fatty acid derivs. and vegetable oils. The work is structured in divisions including epoxidn., radical oxidns., Wacker-type oxidn., dihydroxylation and C=C double bond cleavage.

~11 Citings

These are just few examples of the subject scholarly work as an established academics from ivy league institutions including Max Planck Institute of Molecular Plant Physiology and Cornell University. The article will be further worked on as it was deleted at the draft stage, so undeletion is requested. It must be pointed out that Jmcgnh, Swister Twister and TerungwaSamuel among others reviewed/contributed to the article which was substantially different from the earlier version deleted by dodger67 as moved to draft space by Primefac, supported the reference to be worked on along with citations Ejembi12 (talk) 18:03, 14 September 2017 (UTC) As can be seen from citation 13 on reference 6 above; the discovery by the subject of polymer nanofilm with dielectric constant of 1.5 which is the lowest ever reported globally in literature is a revolution to nanoelectronics that affects all electronics from cellphone to computer to make electronics smaller and stronger to perform more tasks. Let it be further known that the subject is an Editor-In-Chief of a peer review Journal Nanotechnology Progress International (JONPI) with several Nobel Laureates as editors, the subject is also a recipient of a prestigious German international scholarship -KAAD and with a second doctorate in theology sets the subject among the very very few distinguished academics globally that notability becomes an easy answer. Ejembi12 (talk) 21:41, 14 September 2017 (UTC)[reply]

Primefac, please do not close any person account that has contributed to the subject article to make it better as you have done to TerungwaSamuel closing his account for supporting the subject article, it is a team effort with all editors working for the common good. TerungwaSamuel will appeal the closure out of error that has no relationship with me atal as just a contributor to the subject article just like all who wants to make the article better, I think that is your objective too. Please do not take this personal atall to cause any confusion with people who are supporting the subject article, let us keep it professional, please reopen that account.

Ejembi12 (talk) 00:41, 15 September 2017 (UTC) Graeme Bartlett since you are interested in Chemistry article, is it ok if you could take care of this subject article with chemistry inclination requesting undeletion? Thanks Ejembi12 (talk) 04:32, 15 September 2017 (UTC) For the records the contribution of TerungwaSamuel which made the article substantially different from earlier one deleted by dodger67 can be found in the recently deleted one by dodger67 applying G4 which is not supposed to because the article was substantially different after being moved to draft space by Primefac. Further, the contribution of TerungwaSamuel that led to his account erroneously blocked by Primefac can be found in https://en.wikipedia.org/wiki/Wikipedia:WikiProject_Articles_for_creation/Help_desk#03:29:14.2C_12_September_2017_review_of_submission_by_TerungwaSamuel. Ejembi12 (talk) 10:09, 15 September 2017 (UTC)[reply]

The reference section of the article will be formatted to contain citations from peer review journal from secondary source like this: 4. Yun Ji Kang, Hwajeong Kim, Eunju Kim, Il Kim, Chang-Sik Ha, Fabrication and structural analysis of aromatic polyimide ultra-thin films with different fluorine contents, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2008, 313-314, 585 citation from Onah E.J. etal http://onlinelibrary.wiley.com/doi/10.1002/1439-2054(20020601)287:6%3C412::AID-MAME412%3E3.0.CO;2-V/abstract 5. Mitsuishi, M., Matsui, J., Miyashita, T. 2006 , Functional Organized Molecular Assemblies Based on Polymer Nano-sheets, Polymer Journal 38, 877-896 citation from Onah E.J etal.

. http://www.sciencedirect.com/science/article/pii/S0014305702001866

6. Khaled Aljoumaa, Yinghua Qi, Jianfu Ding and Jacques A. Delaire, 2009, Synthesis and Characterizations of Highly Fluorinated Poly(arylene ether)s for Quadratic Nonlinear Optics, Macromolecules 2009 42 (23), 9275-9288, citation from Ejembi. J. Onah 2003

http://pubsdc3.acs.org/doi/10.1021/cm020728%2B

7. Pedro A. Ourique, Israel Krindges, Cesar Aguzzoli, Carlos A. Figueroa, Javier Amalvy, Cesar H. Wanke, Otávio Bianchi, Synthesis, properties, and applications of hybrid polyurethane–urea obtained from air-oxidized soybean oil, Progress in Organic Coatings, 2017, 108, 15, citation from Onah E.J. etal 2006, http://onlinelibrary.wiley.com/doi/10.1002/app.24327/abstract

Ejembi12 (talk) 16:39, 15 September 2017 (UTC)[reply]

Done. I restored on the conditions that it be submitted for review, and it must not be moved to main space until it passes review by a trusted high-volume editor. ~Anachronist (talk) 20:38, 15 September 2017 (UTC)[reply]

Thanks Anachronist and all who contributed to the article to this point and your advice will be followed through. As a result of the speedy way dodger67 against ethics of wiki; deleting the article applying G4 even when the article was substantially improved from the earlier version he deleted and moved to draft space by Primefac, he dodger67 should not be allowed to review the article again. Let there be high level professionalism to follow rules and not emotions. Ejembi12 (talk) 09:11, 16 September 2017 (UTC)[reply]

Sumana Mukherjee

Sumana Mukherjee · ( talk | logs | links | watch ) · [revisions]

(This user used the preload form for G13 undeletion, but did not specify the name of the Draft they would like undeleted. Consider checking their deleted contributions.) Kgb003 (talk) 04:33, 14 September 2017 (UTC)[reply]

Not done. Article wasn't deleted by G13, it was deleted as unambiguous promotion, multiple times, and is now protected from creation. Start over in draft space or your sandbox and submit it via Wikipedia:Articles for creation. ~Anachronist (talk) 14:02, 15 September 2017 (UTC)[reply]

Rashmi Jha

Rashmi Jha · ( talk | logs | history | links | watch | afd ) · [revisions]

Enter your reasoning here and then click the "Save page" button below —183.87.139.218 (talk) 07:16, 14 September 2017 (UTC)[reply]

Not done, the article is not deleted, just at AFD. Please read the box at the top of this page. ~Anachronist (talk) 13:59, 15 September 2017 (UTC)[reply]

Draft:Aaron Goach

Draft:Aaron Goach · ( talk | logs | links | watch ) · [revisions]

(no text provided) Ramillav (talk) 07:32, 14 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 00:22, 16 September 2017 (UTC)[reply]

Draft:Imam Turki bin Abdullah Mosque

Draft:Imam Turki bin Abdullah Mosque · ( talk | logs | history | links | watch ) · [revisions]

I, Emir of Wikipedia, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Emir of Wikipedia (talk) 11:39, 14 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 00:25, 16 September 2017 (UTC)[reply]

Thomas Hayes (scientist)

Thomas Hayes (scientist) · ( talk | logs | links | watch ) · [revisions]

Remains a person of significant public interest as a central government figure in highly public and controversial court cases. He was also chief scientist for UK government during the trial of, still to this day, the largest terrorist attack on UK soil.— Preceding unsigned comment added by 132.185.160.132 (talk) 16:48, 14 September 2017 (UTC)[reply]

The fact that it was deleted as both WP:G11 and WP:PROD is unusual, and should have a response from DGG (talk · contribs). Note that the requester is using an IP address that belongs to the BBC, which strangely has a bit of history of disruptive edits. Possibly the article should be restored to draft space for improvement? ~Anachronist (talk) 00:31, 16 September 2017 (UTC)[reply]

It had previously been listed for prod as " WP:1E. WP:COATRACK for Pan Am Flight 103 bombing investigation and Pan Am Flight 103 conspiracy theories ", which is the basis of the G11 (in tis case it's advocacy, not promotion) He has no notability except as a forensic scientist who was a witness at the trial. DGG ( talk ) 23:24, 16 September 2017 (UTC)[reply]

In that case, it's probably best to start over from scratch. ~Anachronist (talk) 15:48, 18 September 2017 (UTC)[reply]

Draft:MAKE Santa Fe

Draft:MAKE Santa Fe · ( talk | logs | links | watch ) · [revisions]

I, Arlo Barnes, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Arlo James Barnes 20:13, 14 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 09:22, 17 September 2017 (UTC)[reply]

World Capital Institute

Wikipedia talk:Articles for creation/World Capital Institute · ( logs | links | watch ) · [revisions]

(This user used the preload form for G13 undeletion, but did not specify the name of the Draft they would like undeleted. Consider checking their deleted contributions.) Cityweaver (talk) 21:41, 14 September 2017 (UTC)[reply]

This page was quite promotional and a borderline G11 candidate. I'm not inclined to restore it but I won't object if someone else does. Hut 8.5 09:28, 17 September 2017 (UTC)[reply]

Draft:Company B, 6th Florida Infantry Regiment

Draft:Company B, 6th Florida Infantry Regiment · ( talk | logs | links | watch ) · [revisions]

I, Joshua Beschutzer, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Joshua Beschutzer (talk) 23:46, 14 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 09:30, 17 September 2017 (UTC)[reply]

Draft:Christiane Stolhofer

Draft:Christiane Stolhofer · ( talk | logs | links | watch ) · [revisions]

I, Monicamorrison, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Monicamorrison (talk) 11:01, 15 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 09:57, 17 September 2017 (UTC)[reply]

User:Bilalsarfrazaca/sandbox

User:Bilalsarfrazaca/sandbox · ( talk | logs | links | watch ) · [revisions]

(This user used the preload form for G13 undeletion, but did not specify the name of the Draft they would like undeleted. Consider checking their deleted contributions.) Bilalsarfrazaca (talk) 18:10, 15 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 10:00, 17 September 2017 (UTC)[reply]

Draft:Ali Muhammad

Draft:Ali Muhammad · ( talk | logs | links | watch ) · [revisions]

Amaruxiali (talk) 19:45, 15 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 10:01, 17 September 2017 (UTC)[reply]

File:Steel Panthers Evolution 400x1200.png

File:Steel Panthers Evolution 400x1200.png · ( talk | logs | links | watch ) · [revisions]

It seems that this file was reduced and then deleted under WP:F5. The reduction has rendered it too small to read. If the previous version is any more readable (it might not be), I would request it be undeleted and tagged with {{Non-free no reduce}}. Thanks! —menaechmi (talk) 20:10, 15 September 2017 (UTC)[reply]

The file is currently nominated for deletion for having an insufficient fair use rationale. Hut 8.5 10:02, 17 September 2017 (UTC)[reply]

List of fictional characters with disabilities

List of fictional characters with disabilities · ( talk | logs | history | links | watch ) · [revisions]

I, Flow234, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Flow 234 (Nina) talk 23:50, 15 September 2017 (UTC)[reply]

Accidentally deleted as G13 when its not eligable

- Restored--has possibilities. (anyone who wishes is welcome to convert to the proper form--I don't normally contribute to processes requiring forms, but I was here anyway) DGG ( talk ) 23:26, 16 September 2017 (UTC)[reply]

Done for the record. Hut 8.5 10:26, 17 September 2017 (UTC)[reply]

https://en.wikipedia.org/wiki/Luis_Gallardo_%28business_person%29

Luis Gallardo (business person) · ( talk | logs | links | watch ) · [revisions]

This page follows wikipedia guidelines and has been published without issues for more than a year. It has been deleleted without any claims and wrongfully. Please undelete. — Preceding unsigned comment added by Albert Remedy (talk • contribs) 02:56, 16 September 2017 (UTC)[reply]

Note: This page was deleted under speedy deletion criterion G11, indicating an page that was irredeemably promotional or blatant advertising. Note that G11 deletions are more an issue with the tone of the page as opposed to its sources or formatting. As articles deleted under G11 need to be rewritten from scratch, they will not be undeleted as-is here; try contacting the deleting administrator (Doc James (talk · contribs)). Alternatively, you may request the page be restored as a draft or to have the contents of its last known revision emailed to you provided you have email enabled in your account's preferences. I will also note that the page was deleted under criterion G5, which indicates it was created by a user evading their block or ban. —Jeremy v^_^v ^Bori! 04:33, 16 September 2017 (UTC)[reply]

Account making the request has zero other edits and the article was created by a sock. So I am inclined to decline. Also as it is not clear if this is a new user or simple a new account I am not willing to provide a draft. Doc James (talk · contribs · email) 12:37, 16 September 2017 (UTC)[reply]

I assume it's simply a new account, as the account was created five minutes before this undeletion request was made. —Jeremy v^_^v ^Bori! 18:28, 16 September 2017 (UTC)[reply]

The deletion review was already here. Doc James (talk · contribs · email) 12:41, 16 September 2017 (UTC)[reply]

Not done the reason given for the deletion (WP:CSD#G11 and WP:CSD#G5) is not one that is supposed to be handled through this process. As the deletion administrator won't restore the page, your only option would be deletion review, but this page has already been discussed there. To me the deletion looks perfectly valid and the fact that the article remained up for some time doesn't mean it can't be deleted. Hut 8.5 10:09, 17 September 2017 (UTC)[reply]

User:AaronWikia/sandbox3

User:AaronWikia/sandbox3 · ( talk | logs | history | links | watch ) · [revisions]

I, AaronWikia, request the undeletion of this user page or Articles for creation submission deleted under CSD U1. Please restore the page as I intend to work on it. —AaronWikia (talk) 06:07, 16 September 2017 (UTC)[reply]

Done Hut 8.5 10:10, 17 September 2017 (UTC)[reply]

Draft:Das's Rice Mill Of Jhalakati

Draft:Das's Rice Mill Of Jhalakati · ( talk | logs | links | watch ) · [revisions]

I, 175.141.56.38, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. 175.141.56.38 (talk) 16:32, 16 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 10:16, 17 September 2017 (UTC)[reply]

Bernardo Álvarez Lince

Bernardo Álvarez Lince · ( talk | logs | links | watch ) · [revisions]

Dear Wikipedia: I think you shouldn't have deleted this page because I was working on this author and looking forward to publishing the information in both English, that is a universal language, and in Spanish, since the author writes in this language. Also, the reason why I couldn't update the information more frequently was because I had to do some research and that took time. Since your policy states that the articles must have a revision before publishing, I wanted to get the correct information. This author was responsible for the creation of the psychoanalytic community in both Argentina and Colombia. —M.P.L.P.H. (talk) 23:46, 16 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. (Assuming this refers to Draft:Bernardo Alvarez Lince) Hut 8.5 10:25, 17 September 2017 (UTC)[reply]

Draft:Gregory Grigoriev

Draft:Gregory Grigoriev · ( talk | logs | links | watch ) · [revisions]

I, Ggrigoriev, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Ggrigoriev (talk) 14:26, 17 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 15:31, 18 September 2017 (UTC)[reply]

Undelete / request for information: crmnext

CRMNEXT · ( talk | logs | links | watch | afd | afd2 ) · [revisions]

Firstly this page was not created by me but i have been tracking this companies progress Company website: https://www.crmnext.com/ CRMNEXT is a legitimate organization that was represented in Wikipedia. It was recently cited in leading financial paper in india http://economictimes.indiatimes.com/small-biz/money/pe-giants-locked-in-a-race-to-invest-in-saas-startup-crmnext/articleshow/60402050.cms

There might have been content that may be incorrect but deleting the entire page does not make sense Link to wikidata of the page https://www.wikidata.org/wiki/Q24807616 —NiK (talk) 09:19, 18 September 2017 (UTC)[reply]

Not done – this Requests for Undeletion process is only for articles that were deleted uncontroversially, and does not apply to articles deleted after a deletion discussion. Since the article you are here about was deleted after a discussion took place at Wikipedia:Articles for deletion/CRMNEXT (2nd nomination), it cannot be undeleted through this process. However, if you believe that the outcome of the discussion did not reflect the consensus of the participants, or that significant new information has come to light since the article was deleted, you may contact the administrator who closed the discussion, user RoySmith (talk · contribs). After you do so, if your concerns are not addressed and you still seek undeletion, a request may be made at deletion review. ~Anachronist (talk) 15:32, 18 September 2017 (UTC)[reply]

Draft:GPR DRAFT

Draft:GPR DRAFT · ( talk | logs | links | watch ) · [revisions]

I, J.xoe, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. J.xoe (talk) 10:07, 18 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 15:46, 18 September 2017 (UTC)[reply]

unocoin

Unocoin · ( talk | logs | links | watch ) · [revisions]

Unocoin Technologies Pvt Ltd has been one of the leading Bitcoin trading & merchant service provider in India for the general public. There is every right for Unocoin to own a Wikipedia page with details on the company & services offered. However, with some recent edits on the page suggested by users, we have seen that the page was deleted without any prior warnings or elaborated reasons making the visibility and authenticity of news related to the company difficult. We would request you to un-delete the page (and provide any insights on how to rectify unintentional violations of page rules). —kittusiva (talk) 12:40, 18 September 2017 (UTC)[reply]

@Kittusiva:

Not done and will not be done

First, who exactly is this "we" you refer to?

Fair warning was given to the creator of the article at User talk:Baleepgain, as is customary when nominating an article for speedy deletion.

No company has "every right" to have an article on Wikipedia. Just the opposite. Companies that attempt to use Wikipedia for publicity purposes have zero right to have an article here.

The article was deleted, multiple times, in accordance with WP:G11 (unambiguous promotion). Wikipedia is not a promotion or publicity medium. Attempts to use Wikipedia in that manner will lead to article create protection (which has happened), blocking user accounts, and blacklisting the company's domain name so that it can never be used on Wikipedia.

I suggest you start over from scratch at Draft:Unocoin and submit the article for review via Wikipedia:Articles for creation. That is the only way an editor with a conflict of interest (like you apparently have) can publish an article here. ~Anachronist (talk) 15:41, 18 September 2017 (UTC)[reply]

Draft:Tres Dedos

Draft:Tres Dedos (Bend) · ( talk | logs | links | watch ) · [revisions]

I, Tres Dedos, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Tres Dedos 16:16, 18 September 2017 (UTC)

I finished text for that page. Please, bring it back. — Preceding unsigned comment added by Tres Dedos (talk • contribs)

@Tres Dedos: Declined for now. This is the English Wikipedia, and that draft article isn't in English. Also go to WP:CHU/Simple to change your username first. Wikipedia doesn't allow organizations (such as bands) to have user accounts. Your username must represent only you as an individual. ~Anachronist (talk) 20:22, 18 September 2017 (UTC)[reply]

Draft:George Francis Donohue

Draft:George Francis Donohue · ( talk | logs | links | watch ) · [revisions]

I would like to fix the reference errors on the page and resubmit —Rattazzimedia (talk) 19:33, 18 September 2017 (UTC)[reply]

Not done. @Rattazzimedia: Go to WP:CHU/Simple to change your usernamet - Wikipedia prohibits companies to have accounts here. Your username must represent only you as an individual. After you do that, see WP:PAID for instructions on disclosing your paid editing status — a legal obligation to which you agreed when you created your account. The draft article Draft:George Francis Donohue already exists, there is nothing to undelete. ~Anachronist (talk) 20:29, 18 September 2017 (UTC)[reply]

Italian Cultural Centre

Italian Cultural Centre · ( talk | logs | links | watch ) · [revisions]

The RM at Talk:Italian Cultural Centre Vancouver#Requested move 4 September 2017 was closed with consensus for the article not to be moved. I am thus requesting undeletion to avoid confusion or ambiguity. —GeoffreyT2000 ^{(talk, contribs)} 22:38, 18 September 2017 (UTC)[reply]

@GeoffreyT2000: It was deleted via WP:PROD, so I have restored it, but the article doesn't demonstrate notability. It may not survive long in main space. ~Anachronist (talk) 18:15, 19 September 2017 (UTC)[reply]

Draft:Richard Ehrenborg

Draft:Richard Ehrenborg · ( talk | logs | history | links | watch ) · [revisions]

(This user used the preload form for G13 undeletion, but did not specify the name of the Draft they would like undeleted. Consider checking their deleted contributions.) Margaret Readdy (talk) 01:15, 19 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 20:30, 19 September 2017 (UTC)[reply]

Draft:Arya Bina

Draft:Arya Bina · ( talk | logs | links | watch ) · [revisions]

I, Hmensday, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Hmensday (talk) 01:38, 19 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 20:31, 19 September 2017 (UTC)[reply]

Draft:Michigan Image Reconstruction Toolbox

Draft:Michigan Image Reconstruction Toolbox · ( talk | logs | links | watch ) · [revisions]

I, Jfessler, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Jfessler (talk) 15:43, 19 September 2017 (UTC)[reply]

Sorry, I did not realize there was a time limit for working on the draft page. Now that I know that I will pursue it faster and edit it actively. I really hope that I don't lose all the work I put into it already! Jfessler (talk) 15:45, 19 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 20:32, 19 September 2017 (UTC)[reply]

Draft:Anthony Eterovich

Draft:Anthony Eterovich · ( talk | logs | links | watch ) · [revisions]

EterovichEstate (talk) 17:37, 19 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 20:34, 19 September 2017 (UTC)[reply]

Draft:Death of a Bathhouse

Draft:Death of a Bathhouse · ( talk | logs | links | watch ) · [revisions]

I, Stewart Borden, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Stewart Borden (talk) 19:27, 19 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. Hut 8.5 20:35, 19 September 2017 (UTC)[reply]

Draft:Los Poetas

Draft:Los Poetas · ( talk | logs | links | watch ) · [revisions]

I, OneMind604, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. PhantomRaviolis (talk) 00:49, 20 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 19:58, 20 September 2017 (UTC)[reply]

Debris documentar

Debris documentar · ( talk | logs | history | links | watch | afd ) · [revisions]

Please restore my article. I was out of home so I did not have time to contest your deletion and only saw it now. To reiterate: I translated it from the German equivalent Wiki, so, obviously, they did not have a problem vis-a-vis notability/importance over there (and I added references to reliable sources), plus, my article was approved here by another editor via the articles for creation apparatus. As for content: no, it was not vandalism. I realize the film's content is, to put it mildly, not everyone's cup of tea, yet, everything described in the text actually happened in the film. I have worked hard on this entry: Please reply ASAP. —79.183.203.120 (talk) 20:39, 20 September 2017 (UTC)[reply]

The OP has also listed this at Wikipedia:Deletion review/Log/2017 September 20, which is a better forum given the reason for the deletion. Hut 8.5 20:58, 20 September 2017 (UTC)[reply]

Declined for the time being, now that it's at DRV. Re-request here depending on the outcome there. ~Anachronist (talk) 22:32, 20 September 2017 (UTC)[reply]

John_McCaskill.jpg

File:John_McCaskill.jpg · ( talk | logs | links | watch ) · [revisions]

Enter your reasoning here and then click the "Save page" button below —Nhpackard (talk) 23:17, 20 September 2017 (UTC)[reply]

Hi. Thanks for your great work.

The file Joh_McCaskill.jpg has been deleted, with a message "Lack of licensing information". I believe I enclosed the appropriate copyright tags (from template instructions), and I had the copyright holder send an email to permissions-commons@wikimedia.org (included below; it was copied pretty much verbatim from your templates).

I request that the file be restored, and I would appreciate very much any clues regarding how to resolve the problem. (Is it my formatting of the copyright notice? Is it the form of the letter? Is it a lack of communications between permissions-commons@wikimedia.org and the managers of the file?)

Thanks in advance for any help,

Norman Packard

(Redacted)

I have redacted your email address (for your safety) and the email you had forwarded to the WMF (for the sender's safety and to limit copyright issues). This page cannot do anything until there's been a reply to it, at which point a member of WP:OTRS will request undeletion of the image here citing a ticket for it. —Jeremy v^_^v ^Bori! 01:30, 21 September 2017 (UTC)[reply]

Also note that if the file was on Wikimedia Commons, then we can do jack squat about it; Commons and Wikipedia are completely separate projects with their own admins and procedures. Everything I said above still applies, as far as I know. —Jeremy v^_^v ^Bori! 01:33, 21 September 2017 (UTC)[reply]

Done, image restored and tagged. Fortunately it wasn't on Commons. ~Anachronist (talk) 02:40, 21 September 2017 (UTC)[reply]

Draft:David F. Golightly

Draft:David F. Golightly · ( talk | logs | links | watch ) · [revisions]

I, Carackus, request the undeletion of this draft or Articles for creation submission deleted under CSD G13. Please restore the page as I intend to work on it. Carackus (talk) 00:16, 21 September 2017 (UTC)[reply]

Done – as a draft or Articles for creation submission deleted under CSD G13, the page has been restored upon request. Drafts and Articles for creation are not for the indefinite hosting of material found to be unsuitable for inclusion in the encyclopedia. ~Anachronist (talk) 02:54, 21 September 2017 (UTC)[reply]

Claremont Rug Company

Claremont Rug Company · ( talk | logs | links | watch ) · [revisions]

When updating the Bakshaish, Caucasian, Sultanabad pages I added in information for Claremont Rug Company's Rug Type Guide pages which provides scholarly information on the origin, colors, design, and rich history of these Persian Rugs. My intention was not to advertise or promote Claremont Rug Company but to give reference to where the information came from. Our page has now been deleted and I request that it please be restored and in the future, I will not add written content to corresponding pages from our website. My intention was to provide more educational information about these types of rugs to enhance the user experience when searching through Wikipedia for these rug types and then reference the source not to promote our website. Thank you. —Rug Connoisseur (talk) 01:07, 21 September 2017 (UTC)[reply]

Not done. Almost every sentence in that article included instances of unsubstantiated puffery. It was definitely not written in a neutral manner as required by WP:NPOV. Furthermore, your use of "we" and "our website" indicates that you have an association with this company, in which case you shouldn't be creating articles in main space directly (see WP:COI). Instead, you should use your sandbox or draft space (such as Draft:Claremont Rug Company) and submit it for review via Wikipedia:Articles for creation (AFC). AFC is really the only realistic venue for an editor with a conflict of interest to create an article here. Because there is no benefit to the Wikipedia project in restoring a promotional article, it will not be restored and should be rewritten from scratch. Please start over in draft space and use AFC. ~Anachronist (talk) 02:50, 21 September 2017 (UTC)[reply]

User:Adam9007/How (not) to destroy me in an argument

User:Adam9007/How (not) to destroy me in an argument · ( talk | logs | links | watch ) · [revisions]

Time for this to come back I reckon. —Adam9007 (talk) 02:06, 21 September 2017 (UTC)[reply]

Done, restored. ~Anachronist (talk) 02:52, 21 September 2017 (UTC)[reply]

Ratan Pratap

Ratan Pratap · ( talk | logs | links | watch ) · [revisions]

Enter your reasoning here and then click the "Save page" button below —Journochronicles (talk) 07:38, 21 September 2017 (UTC) Ratan Pratap is a public figure in India. An article on him was written with less sources. However, I have created a new draft with enough citations. I would request you to kindly undelete this page so I can put references and move it to mainspace again. As he is a Bollywood personality I would request admin to help me with recreation of title- Ratan Pratap.[reply]

@@ Line 982: / Line 982: @@
 == Ratan Pratap ==
-*{{revisions|Page name goes here}}
+*{{revisions|Ratan Pratap}}
 Enter your reasoning here and then click the "Save page" button below —[[User:Journochronicles|Journochronicles]] ([[User talk:Journochronicles|talk]]) 07:38, 21 September 2017 (UTC)
 Ratan Pratap is a public figure in India. An article on him was written with less sources. However, I have created a new draft with enough citations. I would request you to kindly undelete this page so I can put references and move it to mainspace again.

v t e Noticeboards
Wikipedia's centralized discussion, request, and help venues. For a listing of ongoing discussions and current requests, see the dashboard. For a related set of forums which do not function as noticeboards see formal review processes.
General	Administrators Main Incidents Bots Bureaucrats Centralized discussion Closure requests Education Interface admins Main Page errors Open proxies VRT Oversight User permissions
Articles and content	Biographies of living persons Copyrights Questions on media Problems Dispute resolution External links Fringe theories Neutral point of view Original research Pending changes Reliable sources Resource requests Scalable vector graphics Spam Blacklist Whitelist Style Titleblacklist Translation
Page handling	History merges Mergers Splits Moves Protection Importation XfD Articles Redirects Categories Templates Files Miscellany Undeletion
User conduct	Conflict of interest Contributor copyright Edit warring and 3RR Sanctions Personal restrictions General sanctions Contentious topics Sockpuppets Usernames (Requests for comment) Vandalism
Other	Arbitration Committee noticeboard Requests Enforcement Edit filters Requested False positives Questions Help desk Teahouse Reference desk New articles Requests for comment Village pump Policy Technical Proposals Idea lab WMF Miscellaneous WikiProject proposals Discussions for discussion
Category:Wikipedia noticeboards