Barbute

Italian barbuta, c. 1460, of the T-shaped design from the Metropolitan Museum of Art

Italian Barbuta, with nasal - 1470-80, Metropolitan Museum of Art

A barbute (termed a barbuta in Italian, literally meaning "bearded", possibly because the beard of a wearer would be visible) is a visorless war helmet of 15th-century Italian design, often with distinctive "T" shaped or "Y" shaped opening for the eyes and mouth.

Origins

The name 'barbuta' when applied to a helmet is first recorded in an inventory made for the Gonzaga family of Mantua in 1407. The helmet can be considered as a specialised form of the sallet, both types of helmet being ultimately derivations of the earlier bascinet. The barbute resembles classical Greek helmets (most strikingly the Corinthian) and may have been influenced by the renewed interest in ancient artifacts common during this period.

Characteristics

This type of helmet has been described as being an example of formal beauty being the result of functional efficiency. The defining characteristic of the barbute is the helmet's downward extension, fully covering both sides of the user's face. Regardless of the type of opening, T-shaped, Y-shaped or arch-shaped, this characteristic was always present. The T- shaped opening is almost always reinforced by a riveted-on iron rim, often extended to the lower edge of the entire helmet.. The Y-shaped form incorporates a distinct projection to guard the nose, which otherwise would protrude from the combined ventilation and vision opening. The barbute helmet-design enabled the user to wear a gorget. In place of a plate gorget, the barbute was often worn with a stiffened mail collar, termed a "standard," which protected the throat and neck. In some examples, like in Italian sallets, barbutes were covered by a rich decorative fabric, typically heavy velvet. A number of surviving barbutes incorporate a keyhole-shaped hole at the apex of the skull for the attachment of a decorative crest. An contemporary painting of Federigo da Montefeltro, Duke of Urbino, shows a barbuta surmounted by a crest in the shape of a heraldic eagle.

Unlike the sallet, the barbute seems to have enjoyed little popularity outside Italy.

Barbutes were made most commonly from a single sheet of metal, however, modern metallurgy has shown that many Italian Renaissance helmets were essentially of iron faced with steel, which was annealed and quenched to give it the desired characteristics of a hard outer surface, with a ductile inner surface which prevented shattering. using the metal smithing process of raising until the piece assumed the desired shape. Many barbutes feature a low ridge forged into the top of the helmet's skull, which served to strengthen the helmet without adding a significant amount of weight.

Bibliography

• Grancsay, Stephen V. (1963) Sculpture in Steel: A Milanese Renaissance Barbute, The Metropolitan Museum of Art Bulletin, New Series, Vol. 21, No. 5 (Jan., 1963), pp. 182-191, Published by: The Metropolitan Museum of Art
• Oakeshott, Ewart (1980) European Weapons and Armour: From the Renaissance to the Industrial Revolution. Lutterworth Press.
• Pyhrr, Stuart W. (1989) European Armor from the Imperial Ottoman Arsenal Metropolitan Museum Journal, Vol. 24 (1989), pp. 85-116, The University of Chicago Press on behalf of The Metropolitan Museum of Art