Dallara GP2/08: Difference between revisions
format infobox in standard way; remove broken Torque entry which is not supported by Template:Infobox racing car |
m Bugfix |
||
| Line 43: | Line 43: | ||
|Steering=Non-power assisted rack and pinion |
|Steering=Non-power assisted rack and pinion |
||
}} |
}} |
||
The '''Dallara GP2/08''' is a [[Auto racing|racing car]] developed by Italian manufacturer [[Dallara]] for use in the [[GP2 Series]], a [[Formula One#Feeder |
The '''Dallara GP2/08''' is a [[Auto racing|racing car]] developed by Italian manufacturer [[Dallara]] for use in the [[GP2 Series]], a [[Formula One#Feeder series|feeder series]] for [[Formula One]]. The GP2/08 is the overall 2nd generation of car used by the GP2 Series, replacing the [[Dallara GP2/05|GP2/05]], which had also been developed by Dallara. The GP2/08 was used from 2008 to 2010, in keeping with the series philosophy of introducing a chassis every 3 year.<ref>{{Cite web|url=https://www.motorsport.com/fia-f2/news/series-unveils-new-2008-2010-car-the-gp2-08/258813/|title=Series unveils new 2008-2010 car, the GP2/08|website=www.motorsport.com|language=en|access-date=2019-04-19}}</ref> As the GP2 Series is a spec formula, the car was utilised by all teams and drivers in the championship. |
||
== Development == |
== Development == |
||
Revision as of 16:43, 28 May 2019
 Yelmer Buurman at the 2008 GP2 Silverstone Round | |
| Category | GP2 Series (2008-2010) |
|---|---|
| Constructor | Dallara |
| Designer(s) | Giancarlo Dallara |
| Predecessor | Dallara GP2/05 |
| Successor | Dallara GP2/11 |
| Technical specifications[1] | |
| Chassis | Sandwich carbon/aluminium honeycomb monocoque |
| Suspension (front) | Double steel wishbones, pushrod operated, twin dampers and torsion bars suspension |
| Suspension (rear) | Spring Suspension |
| Length | 4867mm |
| Width | 1,805 mm (71 in) |
| Height | 1047mm |
| Wheelbase | 3,120 mm (123 in) |
| Engine | Renault Badged Mecachrome V8108 4.0 L (244 cu in) V8 90° naturally aspirated, mid-engined, longitudinally mounted |
| Transmission | AP Racing 6-speed + 1 reverse sequential semi-automatic |
| Power | 612 hp (456 kW) @10000 rpm |
| Weight | 688 kg (1,517 lb) including driver |
| Brakes | Hitco carbon brake discs with Brembo 6-piston calipers and pads |
| Tyres | Bridgestone Potenza (dry and wet) O.Z. racing wheels |
| Competition history | |
| Notable entrants | All GP2 Teams |
| Notable drivers | All GP2 Series Drivers |
| Debut | 2008 Silverstone GP2 Series Round |
| Last event | 2010 Yas Marina GP2 Series round |
The Dallara GP2/08 is a racing car developed by Italian manufacturer Dallara for use in the GP2 Series, a feeder series for Formula One. The GP2/08 is the overall 2nd generation of car used by the GP2 Series, replacing the GP2/05, which had also been developed by Dallara. The GP2/08 was used from 2008 to 2010, in keeping with the series philosophy of introducing a chassis every 3 year.[2] As the GP2 Series is a spec formula, the car was utilised by all teams and drivers in the championship.
Development
Planning and design of the car began in September 2006, with GP2 series Technical Director Didier Perrin laying down the initial design parameters, prior to handing over the detailed design work to Dallara, with it being decided relatively earlier that the partnerships from the first three years of GP2 would be continued until at least 2010, with a chassis by Dallara, Renault branded engine and gearbox by Mecachrome and tyres by Bridgestone. [3] The car was also designed to be upgradable, with an upgrade kit to be issued each year, to keep up with changes in Formula 1. [4]
The car featured a new and 'aggressively low' nose, alongside a single keel suspension and a sculpted front wing. The car had re-designed sidepods, the which were result of a new radiator and cooling set-up. The barge-boards are also noticeably different, being far larger and more sculpted than their predecessor.[5] The rear end was also completely redesigned, with the contoured engine cover fitting over the Mecachrome-built V8 being far tighter than before, and while the rear of the sidepods featured both brand new cooling chimneys and a newer design of the 'shark gill' vents which appeared briefly in 2006. The rear point of the engine cover pulls down to a markedly different, and far neater, exhaust assembly, while the rear wing is a brand new development of that seen in 2007[6] The car also came with anti intrusion panels, and was designed to meet F1 crash test standards of the time, being the only non-F1 car to pass the 2007 Formula One Crash test. [7][8]
The car had its initial shakedown at the Paul Ricard High Speed Test Track on 26th June 2007 by Nelson Piquet Jnr, who was the runner up in the previous GP2 Season, completing 60 laps without any problems.[9] The car was also launched on that day.[10]
References List
- ^ "F2 Fanatic". fiaformula2.com. FIA Formula 2 Ltd.
- ^ "Series unveils new 2008-2010 car, the GP2/08". www.motorsport.com. Retrieved 2019-04-19.
- ^ Engineering, Racecar (2007-12-08). "Dallara GP2/08". Racecar Engineering. Retrieved 2019-04-19.
- ^ Engineering, Racecar (2007-12-08). "Dallara GP2/08". Racecar Engineering. Retrieved 2019-04-19.
- ^ Elizalde, Pablo. "GP2 unveils new car for 2008 - F2 - Autosport". Autosport.com. Retrieved 2019-04-19.
- ^ "Second generation car unveiled at Ricard". Crash. 2007-06-26. Retrieved 2019-04-19.
- ^ "Perrin: GP2/08 improved in every area". Crash. 2007-06-26. Retrieved 2019-04-19.
- ^ "New Dallara GP2/08 chassis shows big improvement over outgoing model". Autoblog. Retrieved 2019-04-19.
- ^ "Piquet gives thumbs-up to new machine". Crash. 2007-06-26. Retrieved 2019-04-19.
- ^ "GP2 Series Unveils New 2008-2010 Car, the GP2 / 08 (+photos) | Auto123.com". www.auto123.com. Retrieved 2019-04-19.
|
