Ford Pinto: Difference between revisions

Ford Pinto
Ford Pinto
	Ford Pinto
Overview
Manufacturer	Ford
Also called	Mercury Bobcat
Production	September 1970–1980
Model years	1971–1980 (Pinto); 1974–1980 (Bobcat)
Assembly	United States: Edison, New Jersey (Edison Assembly); Milpitas, California (San Jose Assembly); Canada: Southwold, Ontario (St. Thomas Assembly);
Designer	Robert Eidschun (1968)
Body and chassis
Class	Subcompact car
Body style	2-door sedan; 2-door sedan delivery; 2-door station wagon; 3-door hatchback
Layout	FR layout
Related	Mercury Bobcat; Ford Mustang II; Pangra
Powertrain
Engine	1.6L Kent I4; 2.0L EAO I4; 2.3L OHC I4; 2.8L Cologne V6;
Transmission	4-speed manual; 3-speed C3/"Selectshift/Cruise-O-Matic" automatic;
Dimensions
Wheelbase	94.0 in (2,390 mm)
Length	163 in (4,100 mm)
Width	69.4 in (1,760 mm)
Height	50 in (1,300 mm)
Curb weight	2,015–2,270 lb (914–1,030 kg) (1971)
Chronology
Predecessor	Ford Cortina (captive import)
Successor	Ford Escort / Mercury Lynx

Browse history interactively

← Previous edit Next edit →

Content deleted Content added

VisualWikitext

Inline

Revision as of 05:14, 20 November 2019

The Ford Pinto is a subcompact car that was manufactured and marketed by Ford Motor Company in North America, sold from the 1971 to the 1980 model years. The smallest American Ford vehicle since 1907, the Pinto was the first subcompact vehicle produced by Ford in North America.

The Pinto was marketed in three body styles through its production: a two-door fastback sedan with a trunk, a three-door hatchback, and a two-door station wagon. Mercury offered rebadged versions of the Pinto as the Mercury Bobcat from 1975 to 1980 (1974–1980 in Canada^[5]). From 1974 to 1978, the Ford Mustang II shared a common platform with the Pinto and Bobcat, though with a different unibody and powertrain assortment. For the 1981 model year, the Pinto was replaced by the Ford Escort, as Ford transitioned its product line towards front-wheel drive. Over 3 million Pintos were produced over its 10-year production run, the Pinto outproduced the combined totals of its domestic rivals, the Chevy Vega and the AMC Gremlin. The Pinto and Mercury Bobcat were produced at Edison Assembly (Edison, New Jersey), St. Thomas Assembly (Southwold, Ontario), and San Jose Assembly (Milpitas, California).^[6]

Since the 1970s, the safety reputation of the Pinto has been surrounded by controversy. Its fuel-tank design attracted both media and government scrutiny after several deadly fires related to the tanks rupturing during rear-end collisions. A subsequent analysis of the overall safety of the Pinto suggested it was comparable to other 1970s subcompact cars. The safety issues surrounding the Pinto and the subsequent response by Ford have been cited widely as a business ethics as well as tort reform case study.

Background

American automakers had first countered imports such as the Volkswagen Beetle with compact cars including the Ford Falcon, Ford Maverick, Chevrolet Corvair and Plymouth Valiant, although these cars featured six-cylinder engines and comprised a larger vehicle class. As the popularity of smaller Japanese imports from Toyota and Datsun increased throughout the 1960s, Ford North America responded by introducing the Cortina from Ford of Europe as a captive import. American automakers would soon introduce their own subcompacts.^[7] These were led by the AMC Gremlin, which arrived six months before the Pinto, and the Chevrolet Vega, introduced the day before the Pinto.

Named for the pony,^[8] the Pinto was introduced on September 11, 1970. The Pinto was a completely new platform, but utilized a powertrain from the European-specification Escort. Ford Chairman Henry Ford II himself purchased a 1971 Runabout (hatchback) to use as one of his personal cars.^[9]

Product development

Initial planning for the Pinto began in the summer of 1967, was recommended by Ford's Product Planning Committee in December 1968, and was approved by Ford's Board of Directors in January 1969.^[10] Ford President Lee Iacocca wanted a 1971 model that weighed under 2,000 pounds and that would be priced at less than $2,000. The Pinto product development, from conception through delivery, was completed in 25 months, when the automotive industry average was 43 months; the Pinto project was the shortest production planning schedule in automotive history up to that time. Some development processes usually conducted sequentially were conducted in parallel. Machine tooling overlapped with product development, which froze the basic design. Decisions which threatened the schedule were discouraged.^[11]^[12]^[13] The attitude of Ford management was to develop the Pinto as quickly as possible.^[14] Iacocca ordered a rush project to build the car, and the Pinto became known internally as "Lee's car".^[15] The Pinto's bodywork was styled by Robert Eidschun.^[1]

Offered with an inline-4 engine and bucket seats the Pinto's mechanical design was conventional, with unibody construction, a longitudinally mounted engine in front driving the rear wheels through either a manual or automatic transmission and live axle rear end. Suspension was by unequal-length control arms with front coil springs; the live rear axle was suspended on leaf springs. The rack and pinion steering had optional power assist, as did the brakes.^[16]

Production history

On September 11, 1970, Ford introduced the Pinto under the tagline The Little Carefree Car.^[17]^[18]

After structural design on alternate body styles encountered obstacles,^[19] Ford offered the Pinto solely as a two-door sedan, with entry level models priced at $1,850, undercutting GM's Chevrolet Vega and directly targeting imported models – which included such new competitors as the Mazda 1200 in 1971, the Subaru DL in 1972, and the Honda Civic in 1973.^[20]

By January 1971, the Pinto had sold over 100,000 units^[21] and 352,402 for the entire 1971 production run; 1974 saw the most Pintos produced in a single model year, with 544,209 units.^[22]

1971–1973

The Ford Pinto went on sale on September 11, 1970 in one bodystyle, a fastback sedan with an enclosed trunk. A hatchback became available on February 20, 1971, debuting at the Chicago Auto Show.^[19] In 1971, the Pinto brochure came with a paper cutout Pinto that one could fold to make a 3D model.^[2] Marketed as the Runabout, the hatchback went on sale five days later, priced at $2,062.^[19] The hatch itself featured exposed chrome hinges for the liftgate and five decorative chrome strips, pneumatic struts to assist in opening the hatch, a rear window approximately as large as the sedan's, and a fold down seat – a feature which became simultaneously an option on the sedan. The hatchback model matched the sedan in all other dimensions and offered 38.1 cubic feet (1.08 m³) of cargo space with its seat folded.^[19] By 1972, Ford redesigned the hatch itself, with the glass portion of the hatch enlarged to almost the entire size of the hatch itself, ultimately to be supplemented for 1977–1980 with an optional rear hatch that was entirely glass.^[23]

On October 30, 1970, less than two months after introduction, 26,000 Pintos were recalled to address a possible problem with the accelerator sticking on once engaged at more than halfway.^[24]^[25]^[26] On March 29, 1971, Ford recalled 220,000 Pintos, all Pintos manufactured prior to March 19, 1971, to address a possible problem with fuel vapors in the engine air filter igniting by a backfire through the carburetor.^[27]^[28]^[29]

On February 24, 1972,^[19] the Pinto station wagon debuted with an overall length of 172.7 in (4,390 mm) and 60.5 cubic feet (1.71 m³) of cargo volume.^[19] The first 2-door Ford station wagon since the 1965 Falcon, the Pinto wagon was equipped with flip-open rear quarter windows. Along with front disc brakes, the 2.0L engine was standard equipment. A Pinto Squire wagon featured faux wood side paneling similar to the full-size Country Squire.^[30]^[31]

Also in February 1972, the Sprint Decor Group was made available for the Pinto for one model year only. The Sprint Decor Group included white exterior paint with blue accent paint and red pinstriping, a blacked out grille, color-keyed wheels with bright trim rings and hubcaps, white sidewall tires and color-keyed dual sport mirrors. The interior included red, white and blue cloth and vinyl bucket seats, full carpeting and a deluxe steering wheel. The Sprint Decor Group was offered simultaneously on the Maverick and Mustang.^[32]

For the 1973 model year, the Pinto received more appearance options. There was a new Sport Accent Group offered in white exterior paint with a choice of two-tone orange or avocado accent paint, matching vinyl roof and a deluxe interior with woodtone trim. There was also a new Luxury Decor Group with bright exterior dress up mouldings, black bumper rub strips and deluxe interior with woodtone trim. New on the option list was slotted forged aluminum wheels.^[33]

1974–1978

In 1974, to meet federal regulations, 5 mph bumpers were added to both the front and rear. Unlike the majority of 1970s cars, the addition of larger bumpers to the Pinto would not necessitate major changes to the bodywork. While the underpowered Kent engine was dropped, the optional OHC engine was expanded to 2.3L. In various forms, this engine would go on to power a variety of Ford vehicles for 23 years. In 1974, Mercury began selling a rebadged version of the Pinto called Bobcat as a Canada-only model. 544,209 units sold, 1974 would be the most popular model year for the Pinto.^[22] Steel-belted tires, an anti-theft alarm system, and metallic glow paint were optional.^[34]

In 1975, in a move to better compete with the AMC Gremlin, Ford introduced the 2.8L V6; while far less powerful than the Gremlin, the V6 gave the Pinto a feature unavailable in the Chevrolet Vega. Sales of the Mercury Bobcat were expanded to Lincoln-Mercury dealers in the United States; it was sold as a hatchback and wagon.^[35]

As a minor styling update for 1976, the Pinto received the eggcrate grille and chrome headlamp bezels recycled from the Canada-only 1974 Mercury Bobcat. For one model year only, two new option packages were offered. One was the sporty new Stallion appearance package with black out trim and black two-tone accent paint offered in red, yellow, silver and white body colors. This option package was shared with the Mustang II and Maverick. The other new option package was the Runabout Squire which featured woodgrain vinyl bodysides like the Squire wagon. The interior received the optional Luxury Decor Group which featured new low back vinyl or plaid cloth bucket seats with matching door trim.^[36]

For the 1977 model year, the Pinto received its first significant styling updates with slanted back urethane headlamp buckets, parking lamps and grille. The taillamps were revised except for the wagons. Runabouts offered an optional all glass rear hatch for the first time. Pinto wagons were given a new option package. Dubbed the Pinto Cruising Wagon, it was the sedan delivery version of the Pinto styled to resemble a small conversion van, complete with round side panel "bubble windows" and a choice of optional vinyl graphics.^[37]

Ford offered new sporty appearance packages similar to those found on the Chevrolet Vega and AMC Gremlin but were strictly cosmetic upgrades that added nothing to vehicle performance.^[37]

In 1978, the Pinto was no longer the smallest Ford sold in the U.S., as the company introduced the Fiesta. Nearly two feet shorter than the Pinto, the German-designed Fiesta was the first front-wheel drive car sold by Ford in the USA.^[38]

1979–1980

For the 1979 model year, the Pinto saw its last significant styling update. Shedding its original Maverick-like styling, the Pinto took on the look of the modern Fairmont with rectangular headlamps, inboard vertical parking lamps and a taller slanted back grille. Except for the wagons, the taillamps were revised. The interior received an update with a new rectangular instrument cluster and modified dash pad for vehicles without the optional sports instrumentation. The variety of sports appearance packages was revised, some with new graphics.^[39]

1980 marked the end of the Pinto's production run. For 1980, the V6 engine was discontinued, leaving the 2.3L as the sole engine.^[40]^[41]

Calendar year	1971	1972	1973	1974	1975	1976	1977	1978	1979	1980
Units	352,402	480,405	484,512	544,209	223,763	290,132	225,097	188,899	199,018	185,054
Total production 3,173,491

Powertrain

Except for 1980, the Pinto was available with a choice of two engines. For the first five years of production, only four-cylinder inline engines were offered. Ford changed the power ratings almost every year.^[42]

In 1974, the 2.3 litres (140 cu in) OHC I4 engine was introduced. This engine would be updated and modified several times, allowing it to remain in production into 1997. Among other Ford vehicles, a turbocharged version of this engine would later power the performance based Thunderbird Turbo Coupe, Mustang SVO, and the European-built Merkur XR4Ti.^[42]

Initial Pinto deliveries in the early years used the English (1,600 cc (98 cu in)) and German (2,000 cc (120 cu in)) engines tuned for performance (see below). The 2,000 cc engine used a two barrel carburetor where just one bore was bigger than that used on the Maverick. With the low weight (not much above 2,000 lb (910 kg)) and the SOHC engine it rated a 10.8 second 0–60 time. With the advent of emission control requirements, Ford moved from the European sourced to domestically sourced engines, using new or modified designs. New safety legislation impacted bumpers and other parts adding to the weight of the car, reducing performance. Revised SAE standards in 1972 dropped the Pinto's 1.6 L (98 cu in) engine to 54 bhp (40 kW) – and the 2.0 L (120 cu in) engine to 86 hp (64 kW).^[43]

Engine name	Years available	Displacement	Horsepower†	Torque†
Inline-four engine
Ford Kent I4	1971–1973	98 cu in (1.6 L)	75 hp (56 kW; 76 PS) (1971) 54 hp (40 kW; 55 PS) (1972–1973)	96 lb⋅ft (130 N⋅m) (1971)
Ford EAO I4	1971–1974	122 cu in (2.0 L)	100 hp (75 kW; 101 PS) (1971) 86 hp (64 kW; 87 PS) (1972–1974)
Ford OHC I4	1974–1980	140 cu in (2.3 L)	90 hp (67 kW; 91 PS) (1974) 83 hp (62 kW; 84 PS) (1975) 92 hp (69 kW; 93 PS) (1976) 89 hp (66 kW; 90 PS) (1977) 88 hp (66 kW; 89 PS) (1978–1980)	110 lb⋅ft (150 N⋅m) (1975) 121 lb⋅ft (164 N⋅m) (1976) 120 lb⋅ft (160 N⋅m) (1977) 118 lb⋅ft (160 N⋅m) (1978–1979) 119 lb⋅ft (161 N⋅m) (1980)
V6 engine
Ford Cologne V6	1975–1979	170 cu in (2.8 L)	97 hp (72 kW; 98 PS) (1975) 103 hp (77 kW; 104 PS) (1976) 93 hp (69 kW; 94 PS) (1977) 90 hp (67 kW; 91 PS) (1978) 102 hp (76 kW; 103 PS) (1979)	139 lb⋅ft (188 N⋅m) (1975) 149 lb⋅ft (202 N⋅m) (1976) 140 lb⋅ft (190 N⋅m) (1977) 143 lb⋅ft (194 N⋅m) (1978) 138 lb⋅ft (187 N⋅m) (1979)
†Horsepower and torque ratings are net output after 1971 model year.

Mercury Bobcat (1974–1980)

Lincoln-Mercury dealers marketed a rebadged variant of the Pinto, as the Mercury Bobcat, beginning with model year 1974 in Canada produced in all of the same body styles. It was styled with a unique eggcrate grille and chrome headlamp bezels. The rear featured modified double width taillamps for sedan and Runabout models.^[44]

For 1975, the Bobcat was added to the U.S. market and sold initially in upgraded levels of trim as the Runabout hatchback and Villager wagon. Lesser trimmed versions were offered in subsequent model years. The Bobcat was never offered as a 2-door sedan with an enclosed trunk for the U.S. market. All Bobcats were restyled with a domed hood and a taller vertical bar grille styled to look like senior Mercury models. Throughout all the model years Bobcats were given various appearance options similar to the Pinto's.

For 1979, the Bobcat received a major restyling featuring a slanted back front end with rectangular headlamps and a larger vertical bar grille. Except for the wagons, the taillamps were revised. The base instrument cluster received a new rectangular design with a modified dash pad.

Production of the Bobcat ended in 1980 to make way for its replacement, the Mercury Lynx. In total, 224,026 Bobcats were produced from 1975 to 1980.^[45]

Gallery

1977 Mercury Bobcat wagon

1977 Mercury Bobcat Villager wagon

1979–1980 Mercury Bobcat Runabout

Reception and criticism

Upon release the Pinto was received with both positive and negative reviews. Road & Track faulted the suspension and standard drum brakes, calling the latter a "serious deficiency", but praised the proven 1.6 L Kent engine, adapted from European Fords. The larger 2300 inline-4 found in the Chevrolet Vega was an innovative, brand new design using an aluminum alloy block and iron head, but needed more development work as initially released. Super Stock Magazine found the fit and finish to be "superior" and were impressed with the car overall.^[16] Car and Driver found the Pinto, when equipped with the larger 2.0L engine and front disc brakes, to be a nimble and powerful commuter car with good visibility and sports-car feel.^[46] A review of the 1974 Pinto with an automatic transmission by Car and Driver was not as favorable noting significant decreases in mileage and acceleration.^[47]

The controversy surrounding the Pinto has resulted in inclusion in retrospective automotive lists. In 2004, Forbes included the Pinto among its fourteen Worst Cars of All Time, saying "When people talk about how bad American small cars created an opportunity for the Japanese to come in and clean house in the 1970s and '80s, they are referring to vehicles like this."^[48] In 2008, Time magazine included the Pinto in The Fifty Worst Cars of All Time, citing the Pinto's "rather volatile nature. The car tended to erupt in flame in rear-end collisions."^[49]

Fuel system fires, recalls, and litigation

The safety of the design of the Pinto's fuel system led to critical incidents and subsequently resulted in a recall, lawsuits, a criminal prosecution, and public controversy. The events surrounding the controversy have been described as a "landmark narrative".^[50] Former UCLA law professor Gary T. Schwartz describes the associated legal case as "mythical" due to several significant factual misconceptions and their impact on the public's understanding.^[51] The Ford Pinto has been cited and debated in numerous business ethics^[52]^[53] as well as tort reform^[54]^[55] case studies.

The placement of the car's fuel tank was the result of both conservative industry practice of the time as well the uncertain regulatory environment during the development and early sales periods of the car. Ford was accused of knowing the car had an unsafe tank placement then forgoing design changes based on an internal cost benefit analysis. Two landmark legal cases, Grimshaw v. Ford Motor Co. and Indiana v. Ford Motor Co., resulted from fatal accidents involving Pintos.^[56]

Scholarly work published in the decades after the Pinto's release have examined the cases and offered summations of the general understanding of the Pinto and the controversy regarding the car's safety performance and risk of fire. These works also reviewed misunderstandings related to the actual number of fire related deaths related to the fuel system design, "wild and unsupported claims asserted in Pinto Madness and elsewhere",^[57] the facts of the related legal cases, Grimshaw vs Ford Motor Company and State of Indiana vs Ford Motor Company, the applicable safety standards at the time of design, and the nature of the NHTSA investigations and subsequent vehicle recalls.^[58]

Fuel system design

The design of the Pinto fuel system was complicated by the uncertain regulatory environment during the development period. The first federal standard for automotive fuel system safety, passed in 1967, known as Section 301 in the Federal Motor Vehicle Safety Standards, initially only considered front impacts. In January 1969, 18 months into the Pinto's development cycle, the NHTSA proposed expanding the standard to cover rear-end collisions. The proposed standard was based on a 20 mph moving-barrier rear impact test. Ford publicly announced it supported the standard. In August 1970, the month the Pinto went into production, the NHTSA changed the proposal to a more stringent 20 mph fixed-barrier standard which car companies were to meet in 18 months. The fixed-barrier standard was seen by the auto industry as a significant increase in test severity. At the same time the NHTSA announced a long-term goal of setting a 30-mph fixed-barrier standard.^[59]^[60] Due to the confusion related to the various proposed standards and an expectation that the NHTSA would not select the more stringent 30 mph fixed-barrier standard, Ford elected to voluntarily meet the 20 mph moving-barrier standard for all cars by 1973.^[61]^[62] Ford and other automobile manufacturers objected to the more stringent fuel system safety standard and filed objections during the required comment periods of the proposed regulations.^[63]

The Pinto's design positioned its fuel tank between the rear axle and the rear bumper, a standard practice in US subcompact cars at the time.^[64] The Pinto's vulnerability to fuel leakage and fire in a rear-end collision was exacerbated by reduced rear "crush space", a lack of structural reinforcement in the rear, and an "essentially ornamental" rear bumper (though similar to other manufacturers).^[65] Crash testing, conducted in 1970 with modified Ford Mavericks, as part of a response to NHTSA proposed regulations, demonstrated vulnerability at fairly low crash speeds. Design changes were made, but post launch tests showed similar results.^[66] These tests were conducted to develop crash testing standards rather than specifically investigating fuel system integrity. Though Ford engineers were not pleased with the car's performance, no reports of the time indicate particular concern.^[67] Ford also tested several different vehicle modifications which could improve rear impact performance.^[68] However, the engineer's occupational caution and aversion to "unproven" solutions as well as a view that the crash test results were inconclusive resulted in the use of a conventional fuel tank design and placement.^[69]^[70] The use of an above-the-axle tank location was considered safer by some, but not all, at Ford. This placement was not a viable option for the hatchback and station wagon body styles.^[71]

Beginning in 1973, field reports of Ford Pintos consumed by fire after low-speed rear-end collisions were received by Ford's recall coordinator office.^[72] Based on standard procedures used to evaluate field reports, Ford's internal recall evaluation group twice reviewed the field data and found no actionable issue.^[73]

Cost–benefit analysis, the Pinto Memo

In 1973, Ford's Environmental and Safety Engineering division developed a cost–benefit analysis entitled Fatalities Associated with Crash Induced Fuel Leakage and Fires for submission to the NHTSA in support of Ford's objection to proposed stronger fuel system regulation.^[74] The document became known as the "Pinto Memo". Cost–benefit analysis was one tool used in the evaluation of safety design decisions accepted by the industry and the NHTSA.^[75] The analysis compared the cost of repairs to the societal costs for injuries and deaths related to fires in cases of vehicle rollovers for all cars sold in the US by all manufacturers. The values assigned to serious burn injuries and loss of life were based on values calculated by NHTSA in 1972.^[76] In the memo Ford estimated the cost of fuel system modifications to reduce fire risks in rollover events to be $11 per car across 12.5 million cars and light trucks (all manufacturers), for a total of $137 million. The design changes were estimated to save 180 burn deaths and 180 serious injuries per year, a cost to society of $49.5 million.

In August 1977, having been provided with a copy of the memo by Grimshaw v. Ford Motor Co. plaintiffs before trial,^[77]^[78] Mark Dowie's investigative article "Pinto Madness", published in Mother Jones magazine, emphasized the emotional aspects of the Grush–Saundy memo and implied Ford was callously trading lives for profits.^[79] The Mother Jones article also erroneously claimed that somewhere between 500 and 900 persons had been killed in fires attributed to the Pinto's unique design features.^[80]

The public understanding of the cost–benefit analysis has contributed to the mythology of the Ford Pinto case. Time magazine said the memo was one of the automotive industry's "most notorious paper trails."^[49] A common misconception is that the document considered Ford's tort liability costs rather than the generalized cost to society and applied to the annual sales of all passenger cars, not just Ford vehicles. The general misunderstanding of the document, as presented by Mother Jones, gave it an operational significance it never had.^[81]^[82]

NHTSA investigation

In April 1974, the Center for Auto Safety petitioned the National Highway Traffic Safety Administration (NHTSA) to recall Ford Pintos to address fuel system design defects after reports from attorneys of three deaths and four serious injuries in rear-end collisions at moderate speeds.^[83]^[84] The NHTSA found there was not enough evidence to warrant a defect investigation.^[83]^[85] In August 1977, Dowie's "Pinto Madness" article was published, leveling a series of accusations against Ford, the Pinto and the NHTSA. These included that Ford knew the Pinto was a "firetrap", and said that Ford did not implement design changes because Ford's cost–benefit analysis document showed that paying out millions in damages in lawsuits was more profitable than the design changes.^[86] The day after the article's release consumer advocate Ralph Nader and the author of the Mother Jones article held a news conference in Washington DC on the alleged dangers of the Pinto's design.^[87] On the same day, Nader and the Center for Auto Safety re-submitted their petition to the NHTSA.^[88]

Schwartz in a Rutgers Law Review article said the NHTSA investigation of the Pinto was in response to consumer complaints and noted the Mother Jones article included a clip out "coupon" that readers could mail to the NHTSA.^[89] Lee and Ermann note that the Mother Jones labeling of the Pinto as a "firetrap" and accusations that the NHTSA was buckling to industry pressure as well as the public interest created by sensationalized new stories "forced a second Pinto investigation and guaranteed that the NHTSA would be under the microscope for its duration."^[90]

On August 11, 1977, the day after the Nader and Mother Jones press conference, the NHTSA initiated an investigation.^[91] On May 8, 1978, the NHTSA informed Ford of their determination that the Pinto fuel system was defective.^[92] The NHTSA concluded:

1971–1976 Ford Pintos have experienced moderate speed, rear-end collisions that have resulted in fuel tank damage, fuel leakage, and fire occurrences that have resulted in fatalities and non-fatal burn injuries ... The fuel tank design and structural characteristics of the 1975–1976 Mercury Bobcat which render it identical to contemporary Pinto vehicles, also render it subject to like consequences in rear impact collisions.^[93]^[94]

NHTSA scheduled a public hearing for June 1978, and NHTSA negotiated with Ford on the recall.^[95]

Lee and Ermann noted that NHTSA used a worst-case test to justify the recall of the Pinto, rather than the regular 1977 rear impact crash test. A large "bullet car" was used instead of a standard moving barrier. Weights were placed in the nose of the car to help it slide under the Pinto and maximize gas tank contact. The vehicle headlights were turned on to provide a possible ignition source. The fuel tank was completely filled with gasoline rather than partially filled with non-flammable Stoddard fluid as was the normal test procedure. In a later interview, the NHTSA engineer was asked why the NHTSA forced a Pinto recall for failing a 35 mph test given that most small cars of the time would not have passed. "Just because your friends get away with shoplifting, doesn't mean you should get away with it too."^[96]^[97]

The National Highway Traffic Safety Administration (NHTSA) ultimately directed Ford to recall the Pinto. Initially, the NHTSA did not feel there was sufficient evidence to demand a recall due to incidents of fire. The NHTSA investigation found that 27 deaths were found to have occurred between 1970 and mid-1977 in rear-impact crashes that resulted in fire. The NHTSA did not indicate if these impacts would have been survivable absent fire or if the impacts were more severe than even a state of the art (for 1977) fuel system could have withstood.^[98] In their analysis of the social factors affecting the NHTSA's actions, Lee and Ermann note that 27 is the same number of deaths attributed to a Pinto transmission problem which contributed to collisions after the affected cars stalled.^[99] They also note that the NHTSA had two primary incentives in proving a defect existed in the Pinto's fuel system design. The administration was pressured by safety advocates (Center for Auto Safety) as well as the public response. It was also being forced into action due to the ways in which both the courts and executive branch were limiting the ability of the NHTSA to address systematic auto safety issues.^[100]

Recall

Though Ford could have proceeded with the formal recall hearing, fearing additional damage to the company's public reputation the company agreed to a "voluntary recall" program.^[101] On June 9, 1978, days before the NHTSA was to issue Ford a formal recall order, Ford recalled 1.5 million Ford Pintos and Mercury Bobcats, the largest recall in automotive history at the time.^[102] Ford disagreed with the NHTSA finding of defect, and said the recall was to "end public concern that has resulted from criticism of the fuel systems in these vehicles."^[103] The Ford recall placed a polyethylene shield between the tank and likely causes of puncture, lengthened the filler tube, and improved the tank filler seal in the event of collision.^[104]

Legal cases

Approximately 117 lawsuits were brought against Ford in connection with rear-end accidents in the Pinto.^[105] The two most significant cases were Grimshaw v. Ford Motor Company and State of Indiana v. Ford Motor Company.^[106]

Grimshaw v. Ford Motor Co.

Grimshaw v. Ford Motor Co., decided in February 1978, is one of two important Pinto cases.^[107] A 1972 Pinto driven by Lily Gray stalled in the center lane of a California freeway. The car was struck from behind by a vehicle initially traveling at 50 mph and impacted at an estimated between 30 and 50 mph resulting in a fuel tank fire.^[108] Gray died at the time of the impact. The passenger, Richard Grimshaw, was seriously burned.^[109]^[110] The plaintiff's bar collaborated with Mother Jones and The Center for Auto Safety to publicize damning information about Ford prior to trial.^[77]^[111] The jury awarded $127.8 million in total damages; $125 million in punitive damages and $2,841,000 in compensatory damages to passenger Richard Grimshaw and $665,000 in compensatory damages to the family of the deceased driver, Lily Gray. The jury award was said to be the largest ever in US product liability and personal injury cases.^[112] The jury award was the largest against an automaker at the time.^[113] The judge reduced the jury's punitive damages award to $3.5 million, which he later said was "still larger than any other punitive damage award in the state by a factor of about five."^[114] Ford subsequently decided to settle related cases out of court.^[115]

Reaction to the Grimshaw case was mixed. According to the Los Angeles Times in 2010, the award "signaled to the auto industry that it would be harshly sanctioned for ignoring known defects."^[116] The case has been held up as an example of the disconnect between the use of corporate risk analysis and the tendency of juries to be offended by such analyses.^[117] The case is also cited as an example of irrational punitive damage awards.^[118] While supporting the finding of liability, Schwartz notes that the punitive damage award is hard to justify.^[119]^[120]

Indiana v. Ford Motor Co.

On August 10, 1978, three teenage girls of the Urlich family of Osceola, Indiana, were killed when the 1973 Pinto they were in was involved in a rear-end collision. The driver had stopped in the road to retrieve the car's gas cap which had been inadvertently left on the top of the car and subsequently fell onto the road. While stopped the Pinto was struck by a Chevrolet van.^[121] Ford sent the Urlichs a recall notice for the Pinto in 1979. A grand jury indicted Ford on three counts of reckless homicide. Indiana v. Ford was a landmark in product liability law as the first time a corporation faced criminal charges for a defective product, and the first time a corporation was charged with murder.^[122] If convicted, Ford faced a maximum fine of $30,000 under Indiana's 1978 reckless homicide statute.^[123] Ford's legal defense was vastly more ambitious than the effort mounted in the Grimshaw case.^[124] The effort was led by James F. Neal with a staff of 80 and a budget of about $1 million; the Elkhart County Prosecuting Attorney had a budget of about $20,000 and volunteer law professors and law students.^[125] A former head of the NHTSA, testifying on Ford's behalf, said the Pinto's design was no more or less safe than that of any other car in its class.^[126] In 1980 Ford was found not guilty.^[123] In 1980 a civil suit was settled for $7,500 to each plaintiff.^[127]

According to Automotive News in 2003, the indictment was a low point in Ford's reputation.^[128] Some saw the suit as a landmark for taking a corporation to task for their actions while others saw the case as frivolous.^[129]^[130] In 2002, Malcolm Wheeler, a lawyer working with the Ford defense team, noted that the case was a poor application of criminal law.^[131] The case also impacted how Ford handled future product liability cases both legally and in the press.^[132]

Subsequent analysis

The recall was included in Time magazine's 2009 top ten product recalls, Popular Mechanics magazine's 2010 five most notorious recalls of all time, and NBC News' 2013 twelve famous recalls.^[133]^[134]^[135] Time said "The Ford Pinto was a famously bad automobile, but worse still might be Ford's handling of the safety concerns."^[134] According to the Los Angeles Times in 2010, the award "signaled to the auto industry that it would be harshly sanctioned for ignoring known defects."^[116]

UCLA law professor Gary T. Schwartz, in a Rutgers Law Review article (see Section 7.3 NHTSA Investigation above), studied the fatality rates of the Pinto and several other small cars of the time period. He noted that fires, and rear-end fires in particular, are very small portion of overall auto fatalities. At the time only 1% of automobile crashes would result in fire and only 4% of fatal accidents involved fire, and only 15% of fatal fire crashes are the result of rear-end collisions.^[136] When considering the overall safety of the Pinto, Schwartz notes that subcompact cars as a class have a generally higher fatality risk. Pintos represented 1.9% of all cars on the road in the 1975–76 period. During that time the car represented 1.9% of all "fatal accidents accompanied by some fire." Implying the car was average for all cars and slightly above average for its class.^[137] When all types of fatalities are considered, the Pinto was approximately even with the AMC Gremlin, Chevrolet Vega, and Datsun 510. It was significantly better than the Datsun 1200/210, Toyota Corolla and VW Beetle.^[136] The safety record of the car in terms of fire was average or slightly below average for compacts, and all cars respectively. This was considered respectable for a subcompact car. Only when considering the narrow subset of rear-impact, fire fatalities for the car were somewhat worse than the average for subcompact cars. While acknowledging this is an important legal point, Schwartz rejects the portrayal of the car as a firetrap.^[138]

Notes

^ ^a ^b Joseph, Damian (October 30, 2009). "Ugliest Cars of the Past 50 Years". Bloomberg Businessweek. Archived from the original on February 20, 2010. Retrieved March 6, 2016. The Pinto doesn't seem so bad—that is, until you remember how sexy Fords from the 1960s were. The design devolved into hexagonal headlight housings, a grille that's only a few inches tall yet wide enough to become the car's focal point, and a rear end that apparently melted from the roof.
^ ^a ^b ^c "Directory Index: Ford 1971 Pinto Brochure". Oldcarbrochures.com. Retrieved December 3, 2011.
^ "Carfolio 1970 Pinto".
^ "Ford Pinto". Automobile-catalog.com.
^ Mays, James C. Ford and Canada: 100 Years Together (Montréal: Syam Publishing, 2003). p.116.
^ Smith, Charles (March 25, 2006). "Lofty ambition / Developer revs up former Ford factory in Richmond for real live-work spaces". The San Francisco Chronicle.
^ SHEREFKIN, ROBERT (June 17, 2003). "Ford 100: Defective Pinto almost took Ford's reputation with it Read more: http://autoweek.com/article/car-news/ford-100-defective-pinto-almost-took-fords-reputation-it#ixzz4wdHFnN3Y". Autoweek. Retrieved October 26, 2017. {{cite web}}: External link in |title= (help)
^ "Why Ford keeps using horse names for cars". Jennings Ford Direct. Retrieved October 26, 2017.
^ Lewis 2003 pages 262–231
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): Initial planning on the Pinto, a second-generation subcompact, began in 1967 ... In January 1969, in a victory for Iaccoca, Ford's Board approved the recommendation of the Product Planning Committee (December 1968) to produce the Pinto.
^ Gioia 1992: The Pinto was brought from inception to production in the record time of approximately 25 months (compared to the industry average of 43 months), a time frame that suggested the necessity for doing things expediently. In addition to the time pressure, the engineering and development teams were required to adhere to the production "limits of 2000" for the diminutive car: it was not to exceed either $2000 in cost or 2000 pounds in weight. Any decisions that threatened these targets or the timing of the car's introduction were discouraged. Under normal conditions design, styling, product planning, engineering, etc., were completed prior to production tooling. Because of the foreshortened time frame, however, some of these usually sequential processes were executed in parallel. As a consequence, tooling was already well under way (thus "freezing" the basic design) ...
^ Helms, Marilyn M.; Hutchins, Betty A. (1992). "Poor quality products: Is their production unethical?". Management Decision. 30 (5): 35. doi:10.1108/00251749210015661. When a decision was made to produce the Pinto, it was given the shortest production planning schedule in history. Tooling went on at the same time as product development so, when testing revealed a serious defect with the gas tank, the $200 million Pinto tooling machines were almost completely built. The directive came from the top, President Lee Iacocca, who emphasized that the Pinto was not to weigh an ounce over 2,000lb and not cost a cent over $2,000 and that safety was not a priority, because "safety doesn't sell".
^ Wojdyla 2011: The genesis of the Ford Pinto came sometime in 1968, when Ford's then-president Lee Iaccoca decided that his company would not sit idly by as new Japanese competitors dominated the small-car segment. He pushed the board to greenlight the Pinto program, and by August 1968 the program was underway. It would have aggressive targets: no more than 2000 pounds, not a penny over $2000 and a delivery deadline of just 25 months, a record at the time and still impressive today.
^ Wojdyla 2011: But at the time, management's attitude was to get the product out the door as fast as possible.
^ Sherefkin 2003: Iacocca ordered a rush program to build the Pinto ... The Pinto quickly became known as "Lee's car." He demanded that it weigh no more than 2,000 pounds and sell for $2,000 ... Iacocca was in a hurry. He wanted the car in showrooms for the 1971 model year. That meant one of the shortest production planning periods in modern automotive history: just 25 months, when the normal time span was 43 months. That also meant that the Pinto's tooling was developed at the same time as product development.
^ ^a ^b "Pinto 2000 Coupe". Super Stock Magazine. December 1970. Retrieved April 29, 2016.
^ "Meet Ford's new Pinto. The little carefree car". Spokane Daily Chronicle. (Washington). (advertisement). September 10, 1970. p. 12.
^ "The Little Carefree Car". Milwaukee Sentinel. (advertisement). September 18, 1970. p. 9, part 1.
^ ^a ^b ^c ^d ^e ^f "Birth of the Ford Pinto". Howstuffworks.com. 2007-08-09.
^ "Quart in a Pinto". The Motor. Vol. 3558. August 26, 1970. pp. 26–27.
^ "1971-1980 Ford Pinto". HowStuffWorks.com. 2007-08-09.
^ ^a ^b Standard Catalog of Ford, 4th edition, 2007, by John Gunnell. Krause Publications
^ "1980 Ford Pinto Brochure".
^ Jones 1978: Soon after the Pinto was introduced, 26,000 were recalled because accelerators were sticking.
^ "Ford Recalls 26,000 Pinto Cars". Chicago Tribune. October 31, 1970. Retrieved March 6, 2016. Ford Motor Co. announced today it is recalling 26,000 early production models of its 1971 Pinto equipped with the 1600 cubic centimeter engine because of an accelerator problem ... The company found that when the throttle is opened more than half way, it is possible that it may not always return to the closed position when pressure on the accelerator pedal is removed
^ Associated Press 1971: For many of the motorists, it's the second time around ... Last October Ford recalled some 26,000 Pintos because of complaints about accelerator pedals sticking when the throttle was opened more than halfway.
^ Jones 1978: 220,000 Pintos were recalled for modifications to prevent possible engine compartment fires.
^ Mateja, James (March 30, 1971). "Ford Recalls 204,000 Pintos to Prevent Fuel Vapor Fires". Chicago Tribune. Ford Motor Co. will recall about 204,000 subcompact 1971 Pintos for modification to prevent possible ignition of fuel vapors in the engine air cleaner, it announced yesterday. A Ford Spokesman declined to give the cost of the recall, but all Pintos produced thru March 19, including 204,000 in the United States, 13,000 in Canada and 2,500 overseas, are involved in the program ... Ford said its investigation of complaints revealed that the possibility of a fire existed because the vapors in the air cleaner could be ignited by a backfire thru the carburetor.
^ Associated Press 1971: About 165,000 American owners of Ford's new Pinto are affected by the automaker's announcement that virtually all the mini-cars are being recalled for an engine defect.
^ http://oldcarbrochures.org/index.php/New-Brochures---May/1972-Ford-Pinto-Brochure-Rev/1972-Ford-Pinto-Rev--08-09
^ Pawel Zal (ed.). "1972 Ford (USA) Pinto Station Wagon". automobile-catalog.com. Retrieved October 26, 2017.
^ "1972 Ford Pinto Sprint". Retrieved January 3, 2018.
^ "1973 Ford Pinto Brochure". Retrieved January 3, 2018.
^ http://oldcarbrochures.org/index.php/New-Brochures---March/1974-Ford-Pinto-Brochure-Rev/1974-Ford-Pinto-Rev--10-11
^ Lewis 2003 pages 286-290
^ "1976 Ford Pinto Brochure". Paintref.com.
^ ^a ^b Lewis 2003 pages 289-303
^ Lewis 2003 pages 304-309
^ Lewis 2003 pages 310-315
^ Lamm, Michael (August 1974). "PM Owners Report: Ford Pinto". Popular Mechanics. Popular Mechanics Magazine.
^ "The Ford Pinto".
^ ^a ^b Gunnell, John A.; Lenzke, James T. (1995). Standard Catalog of Ford Cars, 1903–1990. Krause Publications. ISBN 0-87341-140-4.
^ THE AUTO EDITORS OF CONSUMER GUIDE (2007-08-09). "HowStuffWorks "The Birth of the Ford Pinto"". How Stuff Works.
^ "1974 Mercury Bobcat Brochure Canada".
^ Flory, J. Kelly, Jr (2013). American Cars, 1973–1980: Every Model, Year by Year. Jefferson, NC: McFarland & Company. ISBN 978-0-7864-4352-9.{{cite book}}: CS1 maint: multiple names: authors list (link)
^ "Chevrolet Vega vs Ford Pinto". Car and Driver Magazine. Nov 1971. Retrieved April 12, 2016.
^ "Ford Pinto Runabout: The secret to small-car success cannot be found in an options list". Car and Driver Magazine. June 1974.
^ Lienert, Dan (January 27, 2004). "The worst cars of all time". Forbes. Retrieved March 6, 2016. "You don't want to talk about the Pinto," said a Ford official. "Leave that one in the cemetery." Apparently, Ford has not forgotten the lawsuits and the public relations disasters forged by its Pinto hatchback and sedan. The Pinto's famous safety flaw, of course, was that it was prone to blowing up if rear-ended. When people talk about how bad American small cars created an opportunity for the Japanese to come in and clean house in the 1970s and '80s, they are referring to vehicles like this (and see Chevrolet Vega, second slide).
^ ^a ^b Neil, Dan (September 7, 2007). "1971 Ford Pinto – The 50 Worst Cars of All Time". Time. Of course the Pinto goes on the Worst list, but not because it was a particularly bad car — not particularly — but because it had a rather volatile nature. The car tended to erupt in flame in rear-end collisions. The Pinto is at the end of one of autodom's most notorious paper trails, the Ford Pinto memo, which ruthlessly calculates the cost of reinforcing the rear end ($121 million) versus the potential payout to victims ($50 million). Conclusion? Let 'em burn.
^ Lee & Ermann 1999: The Pinto story has become a landmark narrative" (Nichols 1997:324), a definitive story used to support the construction of amoral corporate behavior as a pervasive social problem. This narrative was first stated publicly by investigative journalist Mark Dowie (1977) in a scathing Pulitzer Prize-winning exposé, "Pinto Madness," published in Mother Jones magazine.
^ Schwartz 1991: Having reflected on these invocations of the Ford Pinto case, I have arrived at two general observations. One is that several significant factual misconceptions surround the public's understanding of the case. Given the cumulative force of these misconceptions, the case can be properly referred to as "mythical."
^ Bazerman, Max H.; Tenbrunsel, Ann E. (April 2011). "Ethical Breakdowns". Harvard Business Review. Retrieved February 28, 2015.
^ Birsch, Douglas (October 25, 1994). The Ford Pinto Case.
^ Woodyard, Chris (March 28, 2011). "Case: Lee Iacocca's Pinto: A fiery failure". USA Today.
^ Kitman, Jamie (March 24, 2011). "Don't Like Government Regulation? How'd You Like Another Pinto?". Cartalk.com.
^ Lee & Ermann 1999: Conventional wisdom holds that Ford Motor Company decided to rush the Pinto into production in 1970 to compete with compact foreign imports, despite internal pre-production tests that showed gas tank ruptures in low-speed rear-end collisions would produce deadly fires. This decision purportedly derived from an infamous seven-page cost-benefit analysis (the "Grush/Saunby Report" [1973]) that valued human lives at $200,000. Settling burn victims' lawsuits would have cost $49.5 million, far less than the $137 million needed to make minor corrections. According to this account, the company made an informed, cynical, and impressively coordinated decision that "payouts" (Kelman and Hamilton 1989:311) to families of burn victims were more cost-effective than improving fuel tank integrity. This description provides the unambiguous foundation on which the media and academics have built a Pinto gas tank decision-making narrative.
^ Danley, John R (2005). "Polishing Up the Pinto: Legal Liability, Moral Blame, and Risk". Business Ethics Quarterly. 15 (2): 205–236. doi:10.5840/beq200515211.
^ Schwartz 1991
^ Rossow, Mark (2015). "Ethics: An Alternative Account of the Ford Pinto Case". Continuing Education and Development Inc. 'Fixed-barrier' meant that the vehicle was moving (towed backwards) into a stationary barrier ... The 20-mph fixed barrier standard was greeted with uniform opposition from the auto industry because it was a much more severe test than the moving-barrier standard.
^ Lee & Ermann 1999: pg 36, 43
^ Lee & Ermann 1999: In the design stage (1967–1970), no company or government standard on rear-end fuel tank integrity existed to guide the engineers, but their actions were consistent with the taken for granted, industry-wide tradition of building lower levels of crashworthiness into small cars. This situation changed in the marketing stage (post 1970). Shortly after the 1971 model year Pintos were released, Ford adopted an internal20 mile-per-hour moving barrier standard for the 1973 model year-the only manufacturer to do so (Gioia 1996; Strobel 1994). The extant legal/regulatory environment reinforced engineers' beliefs that this standard was quite reasonable" since it was the "same one recommended at that time by the federal General Services Administration; the Canadian equivalent of the GSA; the Society of Automotive Engineers; and a private consulting firm hired by NHTSA ..." and by NHTSA itself in 1969 (Strobel 1980:205). This standard would constrain future debates by certifying the Pinto as safe" to Ford's subunit charged with evaluating potential recallable safety problems.
^ Schwartz 1991:In August 1970, 1971 model-year Pintos began coming off the assembly line. Just a few days later, NHTSA-which had never acted on its earlier proposal-advanced a more demanding set of proposed regulations. Three months later, Ford officials decided that for purposes of the 1973 model year, Ford would adopt, as its own internal objective, the regulations that NHTSA had suggested in 1969. In order to respond to NHTSA's more recent proposal, Ford engineers, with actual Pintos now available, stepped up the crash-testing process, and identified a. number of design modifications that might imp:rove the Pinto's performance. In October 1971, Ford officials decided against incorporating any of these modifications into current Pintos; rather, it would wait until NHTSA clarified its position. In 1973, NHTSA promulgated its fuel-tank standard but ruled that this standard would apply only to 1977 models. Ford adopted a 20 mph moving-barrier standard for all 1973 cars.
^ Strobel 1979: Ford then joined other automakers in an aggressive lobbying campaign that was successful in delaying and softening proposed federal standards on how strong fuel systems must be to resist rupture an potential explosion.
^ Gioia 1992: The tank was positioned between the rear bumper and the rear axle (a standard industry practice for the time).
^ Schwartz 1991:Page 1015 and Footnote 9, "The court of appeal opinion referred to the Pinto's bumper as the flimsiest of any American car. Grimshaw, 119 Cal. App. 3d at 774, 174 Cal. Rptr. at 360. Mark Robinson, Jr., co-counsel for the plaintiffs, is emphatic that this reference is correct. Telephone interview with Mark Robinson, Jr. (Sept. 12, 1990) [hereinafter Robinson Interview). In the later criminal case, however, Byron Bloch, a prosecution witness, stated in cross-examination that the Pinto's bumper was about the same as those of the Gremlin, Vega, and Dodge Colt. See L. STROBEL, supra note 5, at 157 ("I would say they were all bad.")."
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): A few months later Ford began crash-testing modified Mavericks in part to prepare a response to NHTSA's proposed regulations. The results demonstrated vulnerability of fuel-integrity at fairly low speeds and some modifications were made. In August of 1970, the first model year Pinto, the 1971, went into production. Post-production testing revealed similar results. Still, there were no federal performance standards at the time and the proposed regulations addressed only front-end collisions.
^ Lee & Ermann 1999: engineers in the design stage were still trying "to find out how to conduct crash tests" (Feaheny 1997; see also Lacey 1986:613). For example, an internal Pinto test report dated November, 1970 listed as its objective "To develop a test procedure to be used to provide baseline data on vehicle fuel system integrity" (NHTSA C7-38-Al.5, Final Test Report #T-0738). In this test, a Pinto sedan exhibited "excessive fuel tank leakage" when towed rearward into a fixed barrier at 21.5 miles per hour, considered roughly equivalent to a car-to-car impact at 35 miles per hour. Nothing in this, or any other, Ford test report indicates that participants felt cause for concern or organizational action. Although some Ford engineers were not especially pleased, they felt that the data were inconclusive or the risks acceptable (Feaheny 1997; Strobel 1980), or they kept their concerns to themselves (Camps 1997). Some felt that cars would rarely be subjected to the extreme forces generated in a fixed-barrier test in real-world collisions (Feaheny 1997; Devine 1996). NHTSA apparently agreed and ultimately replaced the proposed fixedbarrier test with a less-stringent moving-barrier test in its final standard (U.S. Department of Transportation 1988)
^ Gioia 1992: Ford had in fact crash-tested 11 vehicles; 8 of these cars suffered potentially catastrophic gas tank ruptures. The only 3 cars that survived intact had each been modified in some way to protect the tank.
^ Lee & Ermann 1999: Occupational caution encouraged engineers to view many design adjustments that improved test performance as "unproven" in real-world accidents (Devine 1996; Feaheny 1997; Schwartz 1991; Strickland 1996; Strobel 1980). Engineers, who typically value "uncertainty avoidance" (Allison 1971:72 ), chose to stick with an existing design rather than face uncertainties associated with novel ones (Devine 1996; Strobel 1980). One series of tests, for instance, showed that Pintos equipped with pliable foam-like gas tanks would not leak in 30 mile-per-hour crashes. But some engineers feared that such a tank might melt and disagreed with others who felt it was safer than the existing metal design (Devine 1996, see also Strobel 1980). Other engineers believed that rubber bladders improved performance in tests, but anticipated problems under real-world conditions (Strobel 1980).
^ Schwartz 1991: As for additional design proposals brought forward by the plaintiffs, several of them-for example, a bladder within the gas tank, and a "tank within the tank"-concerned somewhat innovative technology that had never been utilized in actual auto production. At trial, there was testimony that a bladder would have been feasible in the early 1970s, but also rebuttal testimony that a bladder was at this time beyond the bounds of feasibility.
^ Lee & Ermann 1999: Ford whistle-blower Harley Copp's argument-that the Pinto would have been safer had its gas tank been placed above the axle rather than behind it-is often cited in Pinto narratives as an example of safety being sacrificed to profits, or at least trunk space, in the design stage (Cullen, Maakestad and Cavender 1987; Dowie 1977; Strobel1994). Yet Copp did not reach this conclusion until 1977 (Strobel1980). And other engineers were considerably less certain about it, even though the above-the-axle design did perform better in one set of crash tests. The engineer overseeing the Pinto's design, Harold MacDonald (whose father died in a fuel tank fire when his Model A Ford exploded after a frontal collision with a tree), felt that the above-the axle placement was less safe under real-world conditions because the tank was closer to the passenger compartment and more likely to be punctured by items in the trunk (Strobel1980).
^ Gioia 1992: I began to construct my own files of incoming safety problems. One of these new files concerned reports of Pintos "lighting up" (in the words of a field representative) in rear-end accidents. There were actually very few reports, perhaps because component failure was not initially assumed. These cars simply were consumed by fire after apparently very low speed accidents.
^ Lee & Ermann 1999: When Gioia became Recall Coordinator, he inherited about 100 active recall campaigns, half of them safety-related. As with most jobs, the enormous workload required him to use standard operating procedures" (SOPs) to organize and manage information for decision making (d. Kriesberg 1976:1102). SOPs increase organizational efficiency by operating as cognitive scripts that transform decision-making opportunities into largely predetermined action patterns. Existing SOPs required that, to be "recallable," problems needed either high frequency or a directly traceable causal link to a design defect. When reports began to trickle in to Gioia that Pintos were "lighting up" in relatively low speed accidents, and after viewing the burned wreckage of a Pinto, he initiated a meeting to determine if this represented a recallable problem. His work group voted unanimously not to recall the Pinto because the weak data did not meet SOP criteria (Gioia 1996). The work group was unaware of any cost-benefit analyses or Pinto crash test results. Reports of Pinto fires continued to trickle in, and eventually Gioia did become aware of, and concerned about, the crash test results. Again he wondered if the Pinto had a recallable problem, so he initiated a second meeting to convince his co-workers that crash tests showed a possible design flaw. But others again saw no design flaws—after all, the Pinto met internal company standards, and no contradictory external standard existed. The work group conceived the tank leak "problem" not as a defect, but as a fundamental and unalterable design feature: the car's small size, the use of light metals, and unibody construction produced a tendency for Pintos (and others in its class) to "crush up like an accordion" in rear-end collisions (Gioia 1996).
^ Grush, E.S.; Saundy, C.S. Fatalities Associated With Crash Induced Fuel Leakage and Fires (PDF) (Report). Ford Environmental and Safety Engineering. Retrieved March 2, 2016.
^ Gioia 1992: The National Highway Traffic Safety Association (NHTSA, a federal agency) had approved the use of cost-benefit analysis as an appropriate means for establishing automotive safety design standards.
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): In calculating the benefits, the analysis used a figure of $200,000 per life. NHTSA had developed this figure in 1972.
^ ^a ^b Frank, Ted. "Rollover Economics: Arbitrary and Capricious Product Liability Regimes". American Enterprise Institute for Public Policy Research.
^ Lee & Ermann 1999: Based on information given to it by lawyers preparing cases against Ford, the Center for Auto Safety petitioned NHTSA in the mid-1970s to investigate the Pinto's rear-end design. According to material presented on the Center's website, Dowie's article is based on that information, made available to him by the Center (www.autosafety.org). "Pinto Madness" is still available on the Mother Jones website along with a video clip showing a Pinto catching fire after being rear-ended. In an interview with Gary T. Schwartz of the Rutgers Law Review, Copp asserted that he was also a major source of the information for the Mother Jones story, Schwartz, "The Myth of the Ford Pinto Case," 1027, n.53
^ Schwartz 1991:The Mother Jones article is suffused with an outrage at companies that apply a pernicious cost-benefit analysis in order to achieve "corporate profits".
^ Schwartz 1991: According to the Mother Jones article, as of 1977, somewhere between 500 and 900 persons had been killed in fires attributed to the Pinto's unique design features
^ Schwartz 1991:To sum up, the Ford document has been assigned an operational significance that it never possessed, and has been condemned as unethical on account of characterizations of the document that are in significant part unwarranted. Of course, the condemnation of Ford's report is linked to the condemnation imposed by the public on the Pinto itself. The common belief is that the Pinto, on account of its fuel-tank design, was a "firetrap." The Mother Jones article derived emotional power from its presentation of the Pinto as a "firetrap, a "death trap," and a "lethal car."47 The combination of that article, the verdict in the Ford Pinto case, the NHTSA initial determination, and the Pinto recall clearly conveyed this sense of the Pinto-as-firetrap to the general public.
^ Lee & Ermann 1999: Dowie (1977) accurately explains in part of his Mother Jones article that Ford employees wrote this document as part of an ongoing lobbying effort to influence NHTSA (24, 28). But his readers have relied exclusively on his other claim, that it was the "internal" (20, 24) memo on which Ford based its decision to market the dangerous Pinto and settle the few inevitable lawsuits (31).
^ ^a ^b Graham, John D. (1991). Huber, Peter W.; Litan, Robert E. (eds.). "Does liability promote the safety of motor vehicles?". The Liability Maze: The Impact of Liability Rules on Innovation and Safety. Washington DC: Brookings Institution: 132.
^ Weiss, Joseph W. (2014). Business Ethics: A Stakeholder and Issues Management Approach. Berrett-Koehler Publishers. ISBN 978-1-62656-141-0.
^ Lee & Ermann 1999:pg 41
^ Dowie 1977: Ford knows the Pinto is a firetrap, yet it has paid out millions to settle damage suits out of court, and it is prepared to spend millions more lobbying against safety standards ... Ford waited eight years because its internal "cost-benefit analysis," which places a dollar value on human life, said it wasn't profitable to make the changes sooner.
^ Dardis & Zent 1982: On August 10, 1977, Ralph Nader and Mark Dowie held a press conference to notify the public that unnecessary deaths and injuries were being suffered as a result of the faulty design of the pre-1977 model year Pinto.
^ Center for Auto Safety 2009
^ Schwartz 1991:Pg 1019, Schwartz noted, "The Mother Jones article had encouraged consumers to write to NHTSA and demand a recall of earlier Pintos. Responding to the wave of consumer complaints it received, NHTSA began a recall proceeding relating to 1971–1976 Pintos." Also see footnote 15.
^ Lee & Ermann 1999:By 1977, the social context had changed. Dowie's (1977:18) article had labeled the Pinto a "firetrap" and accused the agency of buckling to auto-industry pressure. Public interest generated by the article forced a second Pinto investigation and guaranteed that NHTSA would be under a microscope for its duration.
^ Dardis & Zent 1982: On August 11, the National Highway Traffic Safety Administration (NHTSA) began an investigation of the claims.
^ Jones 1978: But NHTSA, a Department of Transportation agency, informed Ford on May 8 about results of the new investigation, which concluded that Pintos had a safety defect.
^ Dardis & Zent 1982: In May 1978, NHTSA determined that pre-1977 model year Ford Pintos were subject to "fuel tank damage, Fuel leakage and fire occurrences which had resulted in fatalities and non-fatal burn injuries" when impacted at "moderate speeds," and that the "fire threshold" in those vehicles was reached at closing speeds of 30–35 MPH.
^ Investigative Report: Alleged Fuel Tank and Filler Neck Damage in Rear-end Collisions of Subcompact Cars Passenger Cars, 1971–1976 Ford Pinto, 1975–1976 Mercury Bobcat (PDF) (Report). Office of Defects Investigation, National Highway Traffic Safety Administration. May 1978. Retrieved March 5, 2016. Based upon the information either developed or acquired during this investigation, the following conlcusions have been reached: 1971–1976 Ford Pintos have experienced moderate speed, rear-end collisions that have resulted in fuel tank damage, fuel leakage, and fire occurrences that have resulted in fatalities and non-fatal burn injuries.
^ Jones 1978: A spokesman for NHTSA said that his agency and Ford began a "process of negotiation" after May 8 that led to Ford's announcement in Detroit yesterday.
^ Lee & Ermann 1999: NHTSA engineer Lee Strickland was assigned to determine if Pinto (and Chevrolet Vega) tank problems warranted a mandatory recall. Strickland's work group held the Pinto and Vega to a higher standard than other cars (Strickland 1996). It dispensed with the usual moving barrier. Instead, it intentionally selected a large and particularly rigid "bullet car" to hit the Pinto's rear end. It weighed down the bullet car's nose to slide under the Pinto and maximize gas tank contact. It also turned on the bullet car's headlights to provide a ready source of ignition. And it completely filled gas tanks in both cars with gasoline rather than the non-flammable Stoddard fluid normally used. Strickland justified these actions as approximating real-world worst-case circumstances (Davidson 1983; NHTSA C7-38; Strickland 1996). For NHTSA, the tests seemed an unqualified success: two 1972 Pintos burst into flame upon impact. In the summer of 1978 NHTSA announced that the Pinto gas tank represented a safety defect, leading to the largest recall campaign in automobile history at that time (NHTSA C7-38; Strickland 1996). Ford agreed to "voluntarily" recall 1971–1976 Pintos. Other small cars sold during the 19 70s were not recalled, even though most were comparable, or in the case of the AMC Gremlin probably less safe (Schwartz 1991; NHTSA C7-38; Swigert and Farrell 198081:180). Their manufacturers successfully defended them as acceptable risks (see Wallace 1978). When we asked why NHTSA forced a Pinto recall for failing the 35 mile-per-hour test, although most small cars could not withstand such a test, Strickland ( 1996) analogized that, "Just because your friends get away with shoplifting, doesn't mean you should get away with it too."
^ Lee, Matthew T (1998). "The Ford Pinto Case and the Development of Auto Safety Regulations, 1893—1978". Business and Economic History. 27 (2): 390–401.
^ Schwartz 1991: Relying on a variety of external sources (including Ford), NHTSA indicated that it was aware of thirty-eight instances in which rear-end impact on Pintos had resulted in fuel-tank leakage or fire; these instances, in turn, resulted in twenty-seven deaths and twenty-four nonfatal burn injuries.66 The NHTSA report also incorporated the data internally provided by NHTSA's own Fatal Accident Reporting System ("FARS"), which had begun operation in 1975. FARS data showed that from January 1975 through the middle of 1977, seventeen people had died in accidents in which Pinto rear-end collisions resulted in fires. 67 In comparing NHTSA's figure of twenty-seven deaths for 1971–77 with the FARS figure of seventeen for 1975–77,68 one should keep in mind that the number of Pintos on the road was increasing every year in a cumulative way. The NHTSA figure of twenty-seven fatalities hence seems roughly in the ballpark by way of suggesting the number of people who had died in Pinto rear-end fires. In setting forth this number, however, NHTSA made no effort to estimate how many of these deaths were caused by the Pinto's specific design features. Many fire deaths undeniably result from high-speed collisions that would induce leakage even in state-of-the-art fuel systems;69 moreover, cars in the subcompact class generally entail a relatively high fatality risk.70 Yet the NHTSA report did not compare the performance results of the Pinto to the results of other cars then on the road, including other subcompacts.
^ Lee & Ermann 1999:Beginning in the late 1970s, claims consistent with "Pinto Madness" readily gained public acceptance, but credible contradictory claims did not (e.g., Davidson 1983; Epstein 1980). For instance, Dowie's "conservative" estimate of 500 deaths (1977:18) was accepted, while NHTSA's report that it could document only 27 Pinto fire-related deaths (NHTSA C7-38; Frank 1985) was ignored. A transmission problem that also caused 27 Pinto deaths (and 180 on other Ford products [Clarke 1988]) never became a social problem. Similarly, publics accepted claims of safety errors leveled by Harley Copp, a Ford engineer who was apparently overseas when early crucial decisions were made (Camps 1997; Strobel 1980), but ignored other safety-conscious Pinto engineers who believed windshield retention was a more important safety problem (Camps 1997), and lack of safety glass caused more deaths (Feaheny 1997).
^ Lee & Ermann 1999: By the time of its Pinto investigation, NHTSA had essentially abandoned its original mission of forcing industry-wide safety improvements, in favor of investigating and recalling specific cars (Mashaw and Harfst 1990). NHTSA had two primary incentives in reinforcing the extant Nfocal organization" imagery of the Pinto narrative. First, NHTSA was pressured by specific organizations in its network (e.g., the Center for Auto Safety) and members of the public (see NHTSA C7-38) to take action on the Pinto's gas tank. Second, other network actors (e.g., courts, the Nixon administration, the auto industry) had increasingly limited NHTSA's ability to address systemic auto safety issues.
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): Ford could have refused to recall and have chosen instead to defend the Pinto's design in the formal recall hearings at NHTSA." While this tactic could easily have delayed any forced recall for months, if not for more than a year, the cost of the publicized hearings to Ford's reputation could have been substantial, even if Ford had been successful in the end. Ford agreed to "voluntarily recall" the Pinto in June 1978.
^ Lee & Ermann 1999: the Pinto was the subject of the largest recall in automobile history at the time.
^ Jones 1978: In a prepared statement, Ford vice President Herbet L. Misch said: "Ford informed NHTSA that it does not agree with the agency's initial determination of May 8 that an unreasonable risk of safety is involved in the design of these cars ..." Misch said Ford decided to offer the modifications "so as to end public concern that has resulted from criticism of the fuel systems in these vehicles".
^ "1975 FORD PINTO". NHTSA.
^ Sherefkin 2003: Ford customers filed 117 lawsuits, according to Peter Wyden in The Unknown Iacocca.
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help):Two important legal cases were central. One was a civil trial that began in August 1977 in Orange County California, Grimshaw v. Ford Motor Company. The other was a case involving criminal reckless homicide in Indiana.
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help)
^ Schwartz 1991:The Pinto was then struck by a car, which had originally been traveling at about fifty miles per hour but which had braked down to a speed of perhaps thirty miles per hour at the point of impact.9 ... [footnote 9]For reasons quite beyond the court's control, its opinion must be treated cautiously as a source of actual facts. Because the defendant was appealing a jury verdict in favor of the plaintiffs, the court was under an obligation to view all the evidence in a way most favorable to the plaintiffs and essentially to ignore evidence in the record that might be favorable to the defendant. See id. at 773, 820, 174 Cal. Rptr. at 359, 388. In fact, Ford's basic position at trial-which the court's opinion at no point mentions was that the approaching car (a Ford Galaxie) had not slowed down at all, and had struck the Gray car at a speed in excess of 50 miles per hour. There was an enormous amount of evidence at trial supporting each of the parties' factual claims as to the Galaxie's closing speed. Had the jury accepted Ford's speed estimate, there would not have been much of an issue of crashworthiness: for the plaintiffs' position throughout trial was that even a state-of-the-art fuel system could not maintain integrity in a 50 mile-per hour collision.
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): pg 208
^ Schwartz 1991:pg 1016
^ Lee & Ermann 1999: Based on information given to it by lawyers preparing cases against Ford, the Center for Auto Safety petitioned NHTSA in the mid-1970s to investigate the Pinto's rear-end design. According to material presented on the Center's website, Dowie's article is based on that information, made available to him by the Center (www.autosafety.org). "Pinto Madness" is still available on the Mother Jones website along with a video clip showing a Pinto catching fire after being rear-ended. In an interview with Schwartz, Copp asserted that he was also a major source of the information for the Mother Jones story, Schwartz, "The Myth of the Ford Pinto Case," 1027, n.53
^ Schwartz 1991: after deliberating for eight hours-awarded the Gray family wrongful death damages of $560,000; Grimshaw was awarded over $2.5 million in compensatory damages and $125 million in punitive damages as well. The trial judge reduced the punitive damage award to $3.5 million as a condition for denying a new trial. Two years later the court of appeal affirmed these results in all respects; the state supreme court then denied a hearing.
^ Christian, Nichole M; Henderson, Angelo B; Nomani, Asra Q (October 9, 1997). "Chrysler is Told to Pay $262.5 Million by Jurors in Minivan-Accident Trial". The Wall Street Journal. p. 1. Retrieved March 4, 2016.
^ McLellan, Dennis (April 19, 2008). "Retired O.C. judge handled major cases". Los Angeles Times. Retrieved March 4, 2016.
^ Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): pg 209
^ ^a ^b Williams, Carol J. (March 14, 2010). "Toyota is just the latest automaker to face auto safety litigation". Los Angeles Times. Retrieved March 4, 2016.
^ Viscusi, W. Kip (February 2000). "Corporate Risk Analysis: A Reckless Act?" (PDF). Stanford Law Review. 52 (3): 569. doi:10.2307/1229473. hdl:1803/6556. JSTOR 1229473. The basic problem is that jurors do not undertake a comprehensive risk analysis approach, regardless of its character. Jurors have a tendency to compare the often very small per-unit safety cost with the costs borne by the injured victim. Rather than examine the entire market and the associated benefits and costs, jurors will be offended by, or will not fully understand, a comprehensive risk-analysis approach and will focus their assessment more narrowly on the identified victim and the costs of preventing that injury. The fact that these costs would also have been incurred for thousands of consumers who were not injured will not loom as large, as Judge Easterbrook emphasized. Thus, there is a tendency to exhibit "hindsight bias" rather than to consider the expected costs and expected benefits at the time of the safety decision.
^ Viscusi, W. Kip (February 2000). "Corporate Risk Analysis: A Reckless Act?" (PDF). Stanford Law Review. 52 (3): 569. doi:10.2307/1229473. hdl:1803/6556. JSTOR 1229473.
^ Schwartz, Gary T. (1982–1983). "Deterrence and Punishment in the Common Law of Punitive Damages: A Comment". Southern California Law Review: 134. The Court of Appeal's opinion thus suggested that the Court would have been equally willing to have affirmed the trial judge's decision had he either accepted the jury's $125 million award or reduced the award to $1 million. From a deterrence standpoint, it confounds understanding to permit such vast uncertainty as to the level of the expected penalty.
^ Schwartz 1991: Hence, there was nothing clearly wrong in subjecting Ford to liability for harms resulting from that latter category of fires. The punitive damage award in the Ford Pinto case is, however, much more difficult to justify. To a large extent it rested on the premise that Ford had behaved reprehensibly when it balanced safety against cost in designing the Pinto. However, the process by which manufacturers render such trade-off design decisions seems not only to be anticipated but endorsed by the prevailing risk-benefit standard for design liability. Accordingly, the Pinto jury's decision that punitive damages were appropriate-a decision that was affirmed by the trial judge and the court of appeal-raises serious questions about the operational viability of the risk-benefit standard itself.
^ Epstein 1980
^ Becker, Jipson & Bruce 2002:There is little doubt about the importance of State of Indiana v. Ford Motor Company from a legal standpoint. This case was the first time criminal charges were bought against an American corporation for faulty product design. According to attorney Malcolm Wheeler (1981, p. 250), "[n]ewspapers referred to it as the most important economic case of the century ..." The notion that a corporation could be held accountable for its criminal actions was a novel legal concept at the time. Wheeler was not alone in his estimation of the case as influential. Because of the application of criminal law to corporate behavior, others have referred to this litigation as "unprecedented" (Welty, 1982) and as a "landmark case" (Clinard, 1990; Frank & Lynch, 1992; Hills, 1987; Maakestad, 1987). Maakestad (1987, p. 7) stated that the case "[r]eestablished an important precedent: In certain cases involving human health and safety, corporations and their executives could be required to submit not only to the scrutiny and sanctions of traditional federal regulatory agencies, but to state criminal courts as well."
^ ^a ^b Dole, Charles E. (March 14, 1980). "Pinto verdict lets US industry off hook". The Christian Science Monitor. Retrieved March 3, 2016. An Indiana farm country jury in the 10-week landmark trial found Ford "not guilty" in the deaths of three teen-age girls whose 1973-model Pinto exploded when a speeding van struck it in the rear Aug. 10, 1978.
^ Schwartz 1991:In August 1978-half a year after the verdict in the tort case-a 1973 Pinto was involved in a fatal crash in Ulrich, Indiana. Indiana public officials decided to prosecute Ford for the crime of reckless homicide. Because the reckless homicide statute had been enacted only in 1977, Ford could not be prosecuted for the reckless design of the Pinto; rather, the prosecution needed to show a reckless post-1977 failure by Ford to repair or warn. Largely because of the narrowness of the resulting issue, at trial the prosecution was not able to secure the admission of internal Ford documents on which it had hoped to build its case. Ford's defense effort in this criminal case was vastly more ambitious than the effort the company had previously mounted in defending itself against Grimshaw's tort claim. In March 1980 the Indiana jury found Ford not guilty. The jury seemed ambivalent about the Pinto, but concluded that Ford had avoided recklessness in the conduct of its recall program.
^ Leviton, Joyce (February 4, 1980). "A Local D.A. Charges the Pinto with Murder—and Watergate's James Neal Comes to Its Defense". People. Vol. 13, no. 5. Retrieved March 3, 2016.
^ Gladwell 2015: A former head of the N.H.T.S.A. testified on Ford's behalf, stating that in his opinion the Pinto's design was no more or less safe than that of any other car in its class, like the Chevrolet Vega or the A.M.C. Gremlin.
^ Becker, Jipson & Bruce 2002
^ Sherefkin 2003: The low point for Ford came in 1979 when Indiana authorities charged the automaker with reckless homicide in a criminal trial.
^ Becker, Jipson & Bruce 2002:Two main perspectives emerged after the Pinto trial as to how the case outcome would affect future uses of criminal law against corporations for product liability issues. One viewpoint was stated by thenpresident of the National District Attorneys Association, Robert Johnson, Sr. He is quoted as saying "We'll see more prosecutions like this ... A psychological barrier has been broken, and the big corporations are now vulnerable" (Bodine, 1980, p. 3). The popular idea was that corporate malfeasance would be curtailed if corporations were held accountable for their actions. Thus, the feeling among some legal commentators was that the Pinto case represented a fundamental shift in how the criminal courts would perceive corporations. ... Another perspective was that the case was completely frivolous. Commenting on civil litigation, Harry Philo, then president-elect of the Association of American Trial Lawyers of America, commented that "In my opinion, the Pinto case was a completely irrelevant prosecution" (Stuart, 1980, p.4). However, he also stated that "[t]he verdict won't deter civil lawsuits" (Mleczko, 1980, llA).
^ Epstein 1980:The important point here is that neither the drama of the case nor its outcome should be allowed to obscure the essential legal and institutional issues. On the record, this criminal prosecution should never have been brought at all.
^ Becker, Jipson & Bruce 2002:The very fact that there has not been another product liability criminal prosecution since that case tells you one major impact of the case was ... [that] it said the criminal law is a very, very poor tool to use for product litigation. It's just not appropriate
^ Becker, Jipson & Bruce 2002:Paul Weaver worked for the Ford Motor Company from 1978 to 1980 in the corporation's public affairs staff preparing company positions on public policy issues. He criticized Ford for how it dealt with the controversy surrounding the Pinto. According to Weaver (1988, p.94), "[t]he design of its [Pinto's] fuel system was essentially the same as that of other cars of its size and generation" and "Pintos had about the same rate of death from fire due to rear-end collision as other small cars." His assertion is that the Pinto was not unusual compared to similar models. Weaver admits that "[w]e should simply have told the truth about the car" and "[w]e did not fight to vindicate ourselves." Thus, by refusing to mount a major publicity campaign, Ford gave the impression that it was guilty. ... These remarks add an interesting dimension to the Pinto case in that one of the clear lessons was to confront issues raised about defective products. This concern illustrates that after the Pinto case, corporations became much more willing and adept at handling images stemming from poor design. In other words, the Pinto case made corporations much more willing to wage public relations battles over design and production flaws.
^ Spear, Gillian (June 18, 2013). "Take that back: Famous recalls, from Tylenol to Toyota". NBC News. Retrieved March 5, 2016. Three people died before the recall and six died in Pinto fires during the time following the recall but before the parts to repair the vehicle were made available.
^ ^a ^b "Top 10 Product Recalls". Time. July 2, 2009. Retrieved March 5, 2016.
^ Huffman, John Pearley (February 12, 2010). "5 Most Notorious Recalls of All Time". Popular Mechanics. Retrieved March 5, 2016.
^ ^a ^b Schwartz 1991 Footnote pg 1029
^ Schwartz 1991 pg 1031
^ Schwartz 1991 pg 1033

Bibliography

"Recall to Affect 165,000 U.S. Pinto Owners". Reading Eagle. Associated Press. March 30, 1971. Retrieved March 7, 2016.
Becker, Paul J.; Jipson, Arthur J.; Bruce, Alan S. (March 2002). "State of Indiana V. Ford Motor Company Revisited". American Journal of Criminal Justice. 26 (2): 181–202. doi:10.1007/bf02887826. {{cite journal}}: Invalid |ref=harv (help)
"Ford Pinto Fuel Tank". Center for Auto Safety. November 13, 2009. Retrieved March 5, 2016.
Danley, John R. (April 2005). "Polishing up the Pinto: Legal Liability, Moral Blame, and Risk". Business Ethics Quarterly. 15 (2): 205–236. doi:10.5840/beq200515211. {{cite journal}}: Invalid |ref=harv (help)
Dardis, Rachel; Zent, Claudia (December 1, 1982). "The Economics of the Pinto Recall". Journal of Consumer Affairs. 16 (2): 261–277. doi:10.1111/j.1745-6606.1982.tb00175.x. {{cite journal}}: Invalid |ref=harv (help)
Dowie, Mark (September 1977). "Pinto Madness". Mother Jones. Retrieved January 17, 2014. {{cite web}}: Invalid |ref=harv (help)
Epstein, Richard A (April 1980). "Is Pinto a Criminal?" (PDF). AEI Journal on Government and Society. {{cite journal}}: Invalid |ref=harv (help)
Gladwell, Malcolm (May 4, 2015). "The Engineer's Lament". The New Yorker. Retrieved March 3, 2016. {{cite news}}: Invalid |ref=harv (help)
Gioia, Dennis A. (May 1992). "Pinto fires and personal ethics: A script analysis of missed opportunities". Journal of Business Ethics. 11 (5–6): 379–389. doi:10.1007/BF00870550. {{cite journal}}: Invalid |ref=harv (help)
Grimshaw v. Ford Motor Co., 119 CA3d 757 (Cal. App. 1981).
Jones, William H. (June 10, 1978). "Ford Recalls 1.5 Million Small Cars. Ford Recalls 1.5 Million Pintos, Bobcats, Pintos, Bolcats Face Alteration To Cut Fire Risk". The Washington Post. Retrieved March 4, 2016. {{cite news}}: Invalid |ref=harv (help)
Lee, Matthew T; Ermann, M. David (Feb 1999). "Pinto "Madness" as a Flawed Landmark Narrative: An Organizational and Network Analysis". Social Problems. 46 (1): 30–47. doi:10.1525/sp.1999.46.1.03x0240f. {{cite journal}}: Invalid |ref=harv (help)
Lewis, David L (2003). 100 Years of Ford. Lincolnwood, IL: Publications International Ltd. ISBN 0-7853-7988-6.
Schwartz, Gary T. (1991). "The Myth of the Ford Pinto Case" (PDF). Rutgers Law Review. 43: 1013–1068. {{cite journal}}: Invalid |ref=harv (help)
Sherefkin, Robert (June 16, 2003). "Lee Iacocca's Pinto: A fiery failure". Automotive News. Retrieved March 6, 2016. {{cite news}}: Invalid |ref=harv (help)
Strobel, Lee (October 13, 1979). "Ford ignored Pinto fire peril, secret memos show; Tests of gas tank indicated hazards". Chicago Tribune. p. 1. Retrieved March 12, 2016. {{cite news}}: Invalid |ref=harv (help)
Stuart, Reginald (June 11, 1980). "Government notifies Ford of possible recall for 16 million autos". The New York Times. {{cite news}}: Invalid |ref=harv (help)
Wojdyla, Ben (May 20, 2011). "The Top Automotive Engineering Failures: The Ford Pinto Fuel Tanks". Popular Mechanics. Retrieved February 28, 2015. {{cite web}}: Invalid |ref=harv (help)

External links

Template:Dmoz
FordPinto.com
Mother Jones magazine's 1977 expose on the Ford Pinto
Ford Pinto at The Crittenden Automotive Library includes full 1973 brochure in JPG format
Ford Pinto Specifications and Production figures
Ford Pinto Introduction Commercial
Case Study: Ford Pinto produced by the Business Ethics Workshop at Pace University

[bbw20091030-1] Joseph, Damian (October 30, 2009). "Ugliest Cars of the Past 50 Years". Bloomberg Businessweek. Archived from the original on February 20, 2010. Retrieved March 6, 2016. The Pinto doesn't seem so bad—that is, until you remember how sexy Fords from the 1960s were. The design devolved into hexagonal headlight housings, a grille that's only a few inches tall yet wide enough to become the car's focal point, and a rear end that apparently melted from the roof.

[oldcarbrochures.com-2] "Directory Index: Ford 1971 Pinto Brochure". Oldcarbrochures.com. Retrieved December 3, 2011.

[3] "Carfolio 1970 Pinto".

[4] "Ford Pinto". Automobile-catalog.com.

[5] Mays, James C. Ford and Canada: 100 Years Together (Montréal: Syam Publishing, 2003). p.116.

[6] Smith, Charles (March 25, 2006). "Lofty ambition / Developer revs up former Ford factory in Richmond for real live-work spaces". The San Francisco Chronicle.

[7] SHEREFKIN, ROBERT (June 17, 2003). "Ford 100: Defective Pinto almost took Ford's reputation with it Read more: http://autoweek.com/article/car-news/ford-100-defective-pinto-almost-took-fords-reputation-it#ixzz4wdHFnN3Y". Autoweek. Retrieved October 26, 2017. {{cite web}}: External link in |title= (help)

[8] "Why Ford keeps using horse names for cars". Jennings Ford Direct. Retrieved October 26, 2017.

[9] Lewis 2003 pages 262–231

[10] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): Initial planning on the Pinto, a second-generation subcompact, began in 1967 ... In January 1969, in a victory for Iaccoca, Ford's Board approved the recommendation of the Product Planning Committee (December 1968) to produce the Pinto.

[11] Gioia 1992: The Pinto was brought from inception to production in the record time of approximately 25 months (compared to the industry average of 43 months), a time frame that suggested the necessity for doing things expediently. In addition to the time pressure, the engineering and development teams were required to adhere to the production "limits of 2000" for the diminutive car: it was not to exceed either $2000 in cost or 2000 pounds in weight. Any decisions that threatened these targets or the timing of the car's introduction were discouraged. Under normal conditions design, styling, product planning, engineering, etc., were completed prior to production tooling. Because of the foreshortened time frame, however, some of these usually sequential processes were executed in parallel. As a consequence, tooling was already well under way (thus "freezing" the basic design) ...

[md1992-12] Helms, Marilyn M.; Hutchins, Betty A. (1992). "Poor quality products: Is their production unethical?". Management Decision. 30 (5): 35. doi:10.1108/00251749210015661. When a decision was made to produce the Pinto, it was given the shortest production planning schedule in history. Tooling went on at the same time as product development so, when testing revealed a serious defect with the gas tank, the $200 million Pinto tooling machines were almost completely built. The directive came from the top, President Lee Iacocca, who emphasized that the Pinto was not to weigh an ounce over 2,000lb and not cost a cent over $2,000 and that safety was not a priority, because "safety doesn't sell".

[13] Wojdyla 2011: The genesis of the Ford Pinto came sometime in 1968, when Ford's then-president Lee Iaccoca decided that his company would not sit idly by as new Japanese competitors dominated the small-car segment. He pushed the board to greenlight the Pinto program, and by August 1968 the program was underway. It would have aggressive targets: no more than 2000 pounds, not a penny over $2000 and a delivery deadline of just 25 months, a record at the time and still impressive today.

[14] Wojdyla 2011: But at the time, management's attitude was to get the product out the door as fast as possible.

[15] Sherefkin 2003: Iacocca ordered a rush program to build the Pinto ... The Pinto quickly became known as "Lee's car." He demanded that it weigh no more than 2,000 pounds and sell for $2,000 ... Iacocca was in a hurry. He wanted the car in showrooms for the 1971 model year. That meant one of the shortest production planning periods in modern automotive history: just 25 months, when the normal time span was 43 months. That also meant that the Pinto's tooling was developed at the same time as product development.

[Pinto2000-16] "Pinto 2000 Coupe". Super Stock Magazine. December 1970. Retrieved April 29, 2016.

[sdcmeet-17] "Meet Ford's new Pinto. The little carefree car". Spokane Daily Chronicle. (Washington). (advertisement). September 10, 1970. p. 12.

[18] "The Little Carefree Car". Milwaukee Sentinel. (advertisement). September 18, 1970. p. 9, part 1.

[birth-19] ^ ^a ^b ^c ^d ^e ^f "Birth of the Ford Pinto". Howstuffworks.com. 2007-08-09.

[Motor197008-20] "Quart in a Pinto". The Motor. Vol. 3558. August 26, 1970. pp. 26–27.

[21] "1971-1980 Ford Pinto". HowStuffWorks.com. 2007-08-09.

[Ford_2007-22] Standard Catalog of Ford, 4th edition, 2007, by John Gunnell. Krause Publications

[23] "1980 Ford Pinto Brochure".

[24] Jones 1978: Soon after the Pinto was introduced, 26,000 were recalled because accelerators were sticking.

[25] "Ford Recalls 26,000 Pinto Cars". Chicago Tribune. October 31, 1970. Retrieved March 6, 2016. Ford Motor Co. announced today it is recalling 26,000 early production models of its 1971 Pinto equipped with the 1600 cubic centimeter engine because of an accelerator problem ... The company found that when the throttle is opened more than half way, it is possible that it may not always return to the closed position when pressure on the accelerator pedal is removed

[26] Associated Press 1971: For many of the motorists, it's the second time around ... Last October Ford recalled some 26,000 Pintos because of complaints about accelerator pedals sticking when the throttle was opened more than halfway.

[27] Jones 1978: 220,000 Pintos were recalled for modifications to prevent possible engine compartment fires.

[28] Mateja, James (March 30, 1971). "Ford Recalls 204,000 Pintos to Prevent Fuel Vapor Fires". Chicago Tribune. Ford Motor Co. will recall about 204,000 subcompact 1971 Pintos for modification to prevent possible ignition of fuel vapors in the engine air cleaner, it announced yesterday. A Ford Spokesman declined to give the cost of the recall, but all Pintos produced thru March 19, including 204,000 in the United States, 13,000 in Canada and 2,500 overseas, are involved in the program ... Ford said its investigation of complaints revealed that the possibility of a fire existed because the vapors in the air cleaner could be ignited by a backfire thru the carburetor.

[29] Associated Press 1971: About 165,000 American owners of Ford's new Pinto are affected by the automaker's announcement that virtually all the mini-cars are being recalled for an engine defect.

[30] ttp://oldcarbrochures.org/index.php/New-Brochures---May/1972-Ford-Pinto-Brochure-Rev/1972-Ford-Pinto-Rev--08-09

[31] Pawel Zal (ed.). "1972 Ford (USA) Pinto Station Wagon". automobile-catalog.com. Retrieved October 26, 2017.

[32] "1972 Ford Pinto Sprint". Retrieved January 3, 2018.

[33] "1973 Ford Pinto Brochure". Retrieved January 3, 2018.

[34] ttp://oldcarbrochures.org/index.php/New-Brochures---March/1974-Ford-Pinto-Brochure-Rev/1974-Ford-Pinto-Rev--10-11

[35] Lewis 2003 pages 286-290

[36] "1976 Ford Pinto Brochure". Paintref.com.

[Lewis_2003-37] Lewis 2003 pages 289-303

[38] Lewis 2003 pages 304-309

[39] Lewis 2003 pages 310-315

[40] Lamm, Michael (August 1974). "PM Owners Report: Ford Pinto". Popular Mechanics. Popular Mechanics Magazine.

[41] "The Ford Pinto".

[catalog-42] Gunnell, John A.; Lenzke, James T. (1995). Standard Catalog of Ford Cars, 1903–1990. Krause Publications. ISBN 0-87341-140-4.

[43] THE AUTO EDITORS OF CONSUMER GUIDE (2007-08-09). "HowStuffWorks "The Birth of the Ford Pinto"". How Stuff Works.

[44] "1974 Mercury Bobcat Brochure Canada".

[45] Flory, J. Kelly, Jr (2013). American Cars, 1973–1980: Every Model, Year by Year. Jefferson, NC: McFarland & Company. ISBN 978-0-7864-4352-9.{{cite book}}: CS1 maint: multiple names: authors list (link)

[46] "Chevrolet Vega vs Ford Pinto". Car and Driver Magazine. Nov 1971. Retrieved April 12, 2016.

[47] "Ford Pinto Runabout: The secret to small-car success cannot be found in an options list". Car and Driver Magazine. June 1974.

[forbes-48] Lienert, Dan (January 27, 2004). "The worst cars of all time". Forbes. Retrieved March 6, 2016. "You don't want to talk about the Pinto," said a Ford official. "Leave that one in the cemetery." Apparently, Ford has not forgotten the lawsuits and the public relations disasters forged by its Pinto hatchback and sedan. The Pinto's famous safety flaw, of course, was that it was prone to blowing up if rear-ended. When people talk about how bad American small cars created an opportunity for the Japanese to come in and clean house in the 1970s and '80s, they are referring to vehicles like this (and see Chevrolet Vega, second slide).

[time20070907-49] Neil, Dan (September 7, 2007). "1971 Ford Pinto – The 50 Worst Cars of All Time". Time. Of course the Pinto goes on the Worst list, but not because it was a particularly bad car — not particularly — but because it had a rather volatile nature. The car tended to erupt in flame in rear-end collisions. The Pinto is at the end of one of autodom's most notorious paper trails, the Ford Pinto memo, which ruthlessly calculates the cost of reinforcing the rear end ($121 million) versus the potential payout to victims ($50 million). Conclusion? Let 'em burn.

[50] Lee & Ermann 1999: The Pinto story has become a landmark narrative" (Nichols 1997:324), a definitive story used to support the construction of amoral corporate behavior as a pervasive social problem. This narrative was first stated publicly by investigative journalist Mark Dowie (1977) in a scathing Pulitzer Prize-winning exposé, "Pinto Madness," published in Mother Jones magazine.

[51] Schwartz 1991: Having reflected on these invocations of the Ford Pinto case, I have arrived at two general observations. One is that several significant factual misconceptions surround the public's understanding of the case. Given the cumulative force of these misconceptions, the case can be properly referred to as "mythical."

[Bazerman-52] Bazerman, Max H.; Tenbrunsel, Ann E. (April 2011). "Ethical Breakdowns". Harvard Business Review. Retrieved February 28, 2015.

[Douglas_Birsch-53] Birsch, Douglas (October 25, 1994). The Ford Pinto Case.

[tort-54] Woodyard, Chris (March 28, 2011). "Case: Lee Iacocca's Pinto: A fiery failure". USA Today.

[kitman-55] Kitman, Jamie (March 24, 2011). "Don't Like Government Regulation? How'd You Like Another Pinto?". Cartalk.com.

[56] Lee & Ermann 1999: Conventional wisdom holds that Ford Motor Company decided to rush the Pinto into production in 1970 to compete with compact foreign imports, despite internal pre-production tests that showed gas tank ruptures in low-speed rear-end collisions would produce deadly fires. This decision purportedly derived from an infamous seven-page cost-benefit analysis (the "Grush/Saunby Report" [1973]) that valued human lives at $200,000. Settling burn victims' lawsuits would have cost $49.5 million, far less than the $137 million needed to make minor corrections. According to this account, the company made an informed, cynical, and impressively coordinated decision that "payouts" (Kelman and Hamilton 1989:311) to families of burn victims were more cost-effective than improving fuel tank integrity. This description provides the unambiguous foundation on which the media and academics have built a Pinto gas tank decision-making narrative.

[Danley-57] Danley, John R (2005). "Polishing Up the Pinto: Legal Liability, Moral Blame, and Risk". Business Ethics Quarterly. 15 (2): 205–236. doi:10.5840/beq200515211.

[58] Schwartz 1991

[Rossow-59] Rossow, Mark (2015). "Ethics: An Alternative Account of the Ford Pinto Case". Continuing Education and Development Inc. 'Fixed-barrier' meant that the vehicle was moving (towed backwards) into a stationary barrier ... The 20-mph fixed barrier standard was greeted with uniform opposition from the auto industry because it was a much more severe test than the moving-barrier standard.

[60] Lee & Ermann 1999: pg 36, 43

[61] Lee & Ermann 1999: In the design stage (1967–1970), no company or government standard on rear-end fuel tank integrity existed to guide the engineers, but their actions were consistent with the taken for granted, industry-wide tradition of building lower levels of crashworthiness into small cars. This situation changed in the marketing stage (post 1970). Shortly after the 1971 model year Pintos were released, Ford adopted an internal20 mile-per-hour moving barrier standard for the 1973 model year-the only manufacturer to do so (Gioia 1996; Strobel 1994). The extant legal/regulatory environment reinforced engineers' beliefs that this standard was quite reasonable" since it was the "same one recommended at that time by the federal General Services Administration; the Canadian equivalent of the GSA; the Society of Automotive Engineers; and a private consulting firm hired by NHTSA ..." and by NHTSA itself in 1969 (Strobel 1980:205). This standard would constrain future debates by certifying the Pinto as safe" to Ford's subunit charged with evaluating potential recallable safety problems.

[62] Schwartz 1991:In August 1970, 1971 model-year Pintos began coming off the assembly line. Just a few days later, NHTSA-which had never acted on its earlier proposal-advanced a more demanding set of proposed regulations. Three months later, Ford officials decided that for purposes of the 1973 model year, Ford would adopt, as its own internal objective, the regulations that NHTSA had suggested in 1969. In order to respond to NHTSA's more recent proposal, Ford engineers, with actual Pintos now available, stepped up the crash-testing process, and identified a. number of design modifications that might imp:rove the Pinto's performance. In October 1971, Ford officials decided against incorporating any of these modifications into current Pintos; rather, it would wait until NHTSA clarified its position. In 1973, NHTSA promulgated its fuel-tank standard but ruled that this standard would apply only to 1977 models. Ford adopted a 20 mph moving-barrier standard for all 1973 cars.

[63] Strobel 1979: Ford then joined other automakers in an aggressive lobbying campaign that was successful in delaying and softening proposed federal standards on how strong fuel systems must be to resist rupture an potential explosion.

[64] Gioia 1992: The tank was positioned between the rear bumper and the rear axle (a standard industry practice for the time).

[65] Schwartz 1991:Page 1015 and Footnote 9, "The court of appeal opinion referred to the Pinto's bumper as the flimsiest of any American car. Grimshaw, 119 Cal. App. 3d at 774, 174 Cal. Rptr. at 360. Mark Robinson, Jr., co-counsel for the plaintiffs, is emphatic that this reference is correct. Telephone interview with Mark Robinson, Jr. (Sept. 12, 1990) [hereinafter Robinson Interview). In the later criminal case, however, Byron Bloch, a prosecution witness, stated in cross-examination that the Pinto's bumper was about the same as those of the Gremlin, Vega, and Dodge Colt. See L. STROBEL, supra note 5, at 157 ("I would say they were all bad.")."

[66] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): A few months later Ford began crash-testing modified Mavericks in part to prepare a response to NHTSA's proposed regulations. The results demonstrated vulnerability of fuel-integrity at fairly low speeds and some modifications were made. In August of 1970, the first model year Pinto, the 1971, went into production. Post-production testing revealed similar results. Still, there were no federal performance standards at the time and the proposed regulations addressed only front-end collisions.

[67] Lee & Ermann 1999: engineers in the design stage were still trying "to find out how to conduct crash tests" (Feaheny 1997; see also Lacey 1986:613). For example, an internal Pinto test report dated November, 1970 listed as its objective "To develop a test procedure to be used to provide baseline data on vehicle fuel system integrity" (NHTSA C7-38-Al.5, Final Test Report #T-0738). In this test, a Pinto sedan exhibited "excessive fuel tank leakage" when towed rearward into a fixed barrier at 21.5 miles per hour, considered roughly equivalent to a car-to-car impact at 35 miles per hour. Nothing in this, or any other, Ford test report indicates that participants felt cause for concern or organizational action. Although some Ford engineers were not especially pleased, they felt that the data were inconclusive or the risks acceptable (Feaheny 1997; Strobel 1980), or they kept their concerns to themselves (Camps 1997). Some felt that cars would rarely be subjected to the extreme forces generated in a fixed-barrier test in real-world collisions (Feaheny 1997; Devine 1996). NHTSA apparently agreed and ultimately replaced the proposed fixedbarrier test with a less-stringent moving-barrier test in its final standard (U.S. Department of Transportation 1988)

[68] Gioia 1992: Ford had in fact crash-tested 11 vehicles; 8 of these cars suffered potentially catastrophic gas tank ruptures. The only 3 cars that survived intact had each been modified in some way to protect the tank.

[69] Lee & Ermann 1999: Occupational caution encouraged engineers to view many design adjustments that improved test performance as "unproven" in real-world accidents (Devine 1996; Feaheny 1997; Schwartz 1991; Strickland 1996; Strobel 1980). Engineers, who typically value "uncertainty avoidance" (Allison 1971:72 ), chose to stick with an existing design rather than face uncertainties associated with novel ones (Devine 1996; Strobel 1980). One series of tests, for instance, showed that Pintos equipped with pliable foam-like gas tanks would not leak in 30 mile-per-hour crashes. But some engineers feared that such a tank might melt and disagreed with others who felt it was safer than the existing metal design (Devine 1996, see also Strobel 1980). Other engineers believed that rubber bladders improved performance in tests, but anticipated problems under real-world conditions (Strobel 1980).

[70] Schwartz 1991: As for additional design proposals brought forward by the plaintiffs, several of them-for example, a bladder within the gas tank, and a "tank within the tank"-concerned somewhat innovative technology that had never been utilized in actual auto production. At trial, there was testimony that a bladder would have been feasible in the early 1970s, but also rebuttal testimony that a bladder was at this time beyond the bounds of feasibility.

[71] Lee & Ermann 1999: Ford whistle-blower Harley Copp's argument-that the Pinto would have been safer had its gas tank been placed above the axle rather than behind it-is often cited in Pinto narratives as an example of safety being sacrificed to profits, or at least trunk space, in the design stage (Cullen, Maakestad and Cavender 1987; Dowie 1977; Strobel1994). Yet Copp did not reach this conclusion until 1977 (Strobel1980). And other engineers were considerably less certain about it, even though the above-the-axle design did perform better in one set of crash tests. The engineer overseeing the Pinto's design, Harold MacDonald (whose father died in a fuel tank fire when his Model A Ford exploded after a frontal collision with a tree), felt that the above-the axle placement was less safe under real-world conditions because the tank was closer to the passenger compartment and more likely to be punctured by items in the trunk (Strobel1980).

[72] Gioia 1992: I began to construct my own files of incoming safety problems. One of these new files concerned reports of Pintos "lighting up" (in the words of a field representative) in rear-end accidents. There were actually very few reports, perhaps because component failure was not initially assumed. These cars simply were consumed by fire after apparently very low speed accidents.

[73] Lee & Ermann 1999: When Gioia became Recall Coordinator, he inherited about 100 active recall campaigns, half of them safety-related. As with most jobs, the enormous workload required him to use standard operating procedures" (SOPs) to organize and manage information for decision making (d. Kriesberg 1976:1102). SOPs increase organizational efficiency by operating as cognitive scripts that transform decision-making opportunities into largely predetermined action patterns. Existing SOPs required that, to be "recallable," problems needed either high frequency or a directly traceable causal link to a design defect. When reports began to trickle in to Gioia that Pintos were "lighting up" in relatively low speed accidents, and after viewing the burned wreckage of a Pinto, he initiated a meeting to determine if this represented a recallable problem. His work group voted unanimously not to recall the Pinto because the weak data did not meet SOP criteria (Gioia 1996). The work group was unaware of any cost-benefit analyses or Pinto crash test results. Reports of Pinto fires continued to trickle in, and eventually Gioia did become aware of, and concerned about, the crash test results. Again he wondered if the Pinto had a recallable problem, so he initiated a second meeting to convince his co-workers that crash tests showed a possible design flaw. But others again saw no design flaws—after all, the Pinto met internal company standards, and no contradictory external standard existed. The work group conceived the tank leak "problem" not as a defect, but as a fundamental and unalterable design feature: the car's small size, the use of light metals, and unibody construction produced a tendency for Pintos (and others in its class) to "crush up like an accordion" in rear-end collisions (Gioia 1996).

[PintoMemo-74] Grush, E.S.; Saundy, C.S. Fatalities Associated With Crash Induced Fuel Leakage and Fires (PDF) (Report). Ford Environmental and Safety Engineering. Retrieved March 2, 2016.

[75] Gioia 1992: The National Highway Traffic Safety Association (NHTSA, a federal agency) had approved the use of cost-benefit analysis as an appropriate means for establishing automotive safety design standards.

[76] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): In calculating the benefits, the analysis used a figure of $200,000 per life. NHTSA had developed this figure in 1972.

[Frank-77] Frank, Ted. "Rollover Economics: Arbitrary and Capricious Product Liability Regimes". American Enterprise Institute for Public Policy Research.

[78] Lee & Ermann 1999: Based on information given to it by lawyers preparing cases against Ford, the Center for Auto Safety petitioned NHTSA in the mid-1970s to investigate the Pinto's rear-end design. According to material presented on the Center's website, Dowie's article is based on that information, made available to him by the Center (www.autosafety.org). "Pinto Madness" is still available on the Mother Jones website along with a video clip showing a Pinto catching fire after being rear-ended. In an interview with Gary T. Schwartz of the Rutgers Law Review, Copp asserted that he was also a major source of the information for the Mother Jones story, Schwartz, "The Myth of the Ford Pinto Case," 1027, n.53

[79] Schwartz 1991:The Mother Jones article is suffused with an outrage at companies that apply a pernicious cost-benefit analysis in order to achieve "corporate profits".

[80] Schwartz 1991: According to the Mother Jones article, as of 1977, somewhere between 500 and 900 persons had been killed in fires attributed to the Pinto's unique design features

[81] Schwartz 1991:To sum up, the Ford document has been assigned an operational significance that it never possessed, and has been condemned as unethical on account of characterizations of the document that are in significant part unwarranted. Of course, the condemnation of Ford's report is linked to the condemnation imposed by the public on the Pinto itself. The common belief is that the Pinto, on account of its fuel-tank design, was a "firetrap." The Mother Jones article derived emotional power from its presentation of the Pinto as a "firetrap, a "death trap," and a "lethal car."47 The combination of that article, the verdict in the Ford Pinto case, the NHTSA initial determination, and the Pinto recall clearly conveyed this sense of the Pinto-as-firetrap to the general public.

[82] Lee & Ermann 1999: Dowie (1977) accurately explains in part of his Mother Jones article that Ford employees wrote this document as part of an ongoing lobbying effort to influence NHTSA (24, 28). But his readers have relied exclusively on his other claim, that it was the "internal" (20, 24) memo on which Ford based its decision to market the dangerous Pinto and settle the few inevitable lawsuits (31).

[Graham-83] Graham, John D. (1991). Huber, Peter W.; Litan, Robert E. (eds.). "Does liability promote the safety of motor vehicles?". The Liability Maze: The Impact of Liability Rules on Innovation and Safety. Washington DC: Brookings Institution: 132.

[84] Weiss, Joseph W. (2014). Business Ethics: A Stakeholder and Issues Management Approach. Berrett-Koehler Publishers. ISBN 978-1-62656-141-0.

[85] Lee & Ermann 1999:pg 41

[86] Dowie 1977: Ford knows the Pinto is a firetrap, yet it has paid out millions to settle damage suits out of court, and it is prepared to spend millions more lobbying against safety standards ... Ford waited eight years because its internal "cost-benefit analysis," which places a dollar value on human life, said it wasn't profitable to make the changes sooner.

[87] Dardis & Zent 1982: On August 10, 1977, Ralph Nader and Mark Dowie held a press conference to notify the public that unnecessary deaths and injuries were being suffered as a result of the faulty design of the pre-1977 model year Pinto.

[88] Center for Auto Safety 2009

[89] Schwartz 1991:Pg 1019, Schwartz noted, "The Mother Jones article had encouraged consumers to write to NHTSA and demand a recall of earlier Pintos. Responding to the wave of consumer complaints it received, NHTSA began a recall proceeding relating to 1971–1976 Pintos." Also see footnote 15.

[90] Lee & Ermann 1999:By 1977, the social context had changed. Dowie's (1977:18) article had labeled the Pinto a "firetrap" and accused the agency of buckling to auto-industry pressure. Public interest generated by the article forced a second Pinto investigation and guaranteed that NHTSA would be under a microscope for its duration.

[91] Dardis & Zent 1982: On August 11, the National Highway Traffic Safety Administration (NHTSA) began an investigation of the claims.

[92] Jones 1978: But NHTSA, a Department of Transportation agency, informed Ford on May 8 about results of the new investigation, which concluded that Pintos had a safety defect.

[93] Dardis & Zent 1982: In May 1978, NHTSA determined that pre-1977 model year Ford Pintos were subject to "fuel tank damage, Fuel leakage and fire occurrences which had resulted in fatalities and non-fatal burn injuries" when impacted at "moderate speeds," and that the "fire threshold" in those vehicles was reached at closing speeds of 30–35 MPH.

[94] Investigative Report: Alleged Fuel Tank and Filler Neck Damage in Rear-end Collisions of Subcompact Cars Passenger Cars, 1971–1976 Ford Pinto, 1975–1976 Mercury Bobcat (PDF) (Report). Office of Defects Investigation, National Highway Traffic Safety Administration. May 1978. Retrieved March 5, 2016. Based upon the information either developed or acquired during this investigation, the following conlcusions have been reached: 1971–1976 Ford Pintos have experienced moderate speed, rear-end collisions that have resulted in fuel tank damage, fuel leakage, and fire occurrences that have resulted in fatalities and non-fatal burn injuries.

[95] Jones 1978: A spokesman for NHTSA said that his agency and Ford began a "process of negotiation" after May 8 that led to Ford's announcement in Detroit yesterday.

[96] Lee & Ermann 1999: NHTSA engineer Lee Strickland was assigned to determine if Pinto (and Chevrolet Vega) tank problems warranted a mandatory recall. Strickland's work group held the Pinto and Vega to a higher standard than other cars (Strickland 1996). It dispensed with the usual moving barrier. Instead, it intentionally selected a large and particularly rigid "bullet car" to hit the Pinto's rear end. It weighed down the bullet car's nose to slide under the Pinto and maximize gas tank contact. It also turned on the bullet car's headlights to provide a ready source of ignition. And it completely filled gas tanks in both cars with gasoline rather than the non-flammable Stoddard fluid normally used. Strickland justified these actions as approximating real-world worst-case circumstances (Davidson 1983; NHTSA C7-38; Strickland 1996). For NHTSA, the tests seemed an unqualified success: two 1972 Pintos burst into flame upon impact. In the summer of 1978 NHTSA announced that the Pinto gas tank represented a safety defect, leading to the largest recall campaign in automobile history at that time (NHTSA C7-38; Strickland 1996). Ford agreed to "voluntarily" recall 1971–1976 Pintos. Other small cars sold during the 19 70s were not recalled, even though most were comparable, or in the case of the AMC Gremlin probably less safe (Schwartz 1991; NHTSA C7-38; Swigert and Farrell 198081:180). Their manufacturers successfully defended them as acceptable risks (see Wallace 1978). When we asked why NHTSA forced a Pinto recall for failing the 35 mile-per-hour test, although most small cars could not withstand such a test, Strickland ( 1996) analogized that, "Just because your friends get away with shoplifting, doesn't mean you should get away with it too."

[Lee1998-97] Lee, Matthew T (1998). "The Ford Pinto Case and the Development of Auto Safety Regulations, 1893—1978". Business and Economic History. 27 (2): 390–401.

[98] Schwartz 1991: Relying on a variety of external sources (including Ford), NHTSA indicated that it was aware of thirty-eight instances in which rear-end impact on Pintos had resulted in fuel-tank leakage or fire; these instances, in turn, resulted in twenty-seven deaths and twenty-four nonfatal burn injuries.66 The NHTSA report also incorporated the data internally provided by NHTSA's own Fatal Accident Reporting System ("FARS"), which had begun operation in 1975. FARS data showed that from January 1975 through the middle of 1977, seventeen people had died in accidents in which Pinto rear-end collisions resulted in fires. 67 In comparing NHTSA's figure of twenty-seven deaths for 1971–77 with the FARS figure of seventeen for 1975–77,68 one should keep in mind that the number of Pintos on the road was increasing every year in a cumulative way. The NHTSA figure of twenty-seven fatalities hence seems roughly in the ballpark by way of suggesting the number of people who had died in Pinto rear-end fires. In setting forth this number, however, NHTSA made no effort to estimate how many of these deaths were caused by the Pinto's specific design features. Many fire deaths undeniably result from high-speed collisions that would induce leakage even in state-of-the-art fuel systems;69 moreover, cars in the subcompact class generally entail a relatively high fatality risk.70 Yet the NHTSA report did not compare the performance results of the Pinto to the results of other cars then on the road, including other subcompacts.

[99] Lee & Ermann 1999:Beginning in the late 1970s, claims consistent with "Pinto Madness" readily gained public acceptance, but credible contradictory claims did not (e.g., Davidson 1983; Epstein 1980). For instance, Dowie's "conservative" estimate of 500 deaths (1977:18) was accepted, while NHTSA's report that it could document only 27 Pinto fire-related deaths (NHTSA C7-38; Frank 1985) was ignored. A transmission problem that also caused 27 Pinto deaths (and 180 on other Ford products [Clarke 1988]) never became a social problem. Similarly, publics accepted claims of safety errors leveled by Harley Copp, a Ford engineer who was apparently overseas when early crucial decisions were made (Camps 1997; Strobel 1980), but ignored other safety-conscious Pinto engineers who believed windshield retention was a more important safety problem (Camps 1997), and lack of safety glass caused more deaths (Feaheny 1997).

[100] Lee & Ermann 1999: By the time of its Pinto investigation, NHTSA had essentially abandoned its original mission of forcing industry-wide safety improvements, in favor of investigating and recalling specific cars (Mashaw and Harfst 1990). NHTSA had two primary incentives in reinforcing the extant Nfocal organization" imagery of the Pinto narrative. First, NHTSA was pressured by specific organizations in its network (e.g., the Center for Auto Safety) and members of the public (see NHTSA C7-38) to take action on the Pinto's gas tank. Second, other network actors (e.g., courts, the Nixon administration, the auto industry) had increasingly limited NHTSA's ability to address systemic auto safety issues.

[101] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): Ford could have refused to recall and have chosen instead to defend the Pinto's design in the formal recall hearings at NHTSA." While this tactic could easily have delayed any forced recall for months, if not for more than a year, the cost of the publicized hearings to Ford's reputation could have been substantial, even if Ford had been successful in the end. Ford agreed to "voluntarily recall" the Pinto in June 1978.

[102] Lee & Ermann 1999: the Pinto was the subject of the largest recall in automobile history at the time.

[103] Jones 1978: In a prepared statement, Ford vice President Herbet L. Misch said: "Ford informed NHTSA that it does not agree with the agency's initial determination of May 8 that an unreasonable risk of safety is involved in the design of these cars ..." Misch said Ford decided to offer the modifications "so as to end public concern that has resulted from criticism of the fuel systems in these vehicles".

[104] "1975 FORD PINTO". NHTSA.

[105] Sherefkin 2003: Ford customers filed 117 lawsuits, according to Peter Wyden in The Unknown Iacocca.

[106] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help):Two important legal cases were central. One was a civil trial that began in August 1977 in Orange County California, Grimshaw v. Ford Motor Company. The other was a case involving criminal reckless homicide in Indiana.

[107] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help)

[108] Schwartz 1991:The Pinto was then struck by a car, which had originally been traveling at about fifty miles per hour but which had braked down to a speed of perhaps thirty miles per hour at the point of impact.9 ... [footnote 9]For reasons quite beyond the court's control, its opinion must be treated cautiously as a source of actual facts. Because the defendant was appealing a jury verdict in favor of the plaintiffs, the court was under an obligation to view all the evidence in a way most favorable to the plaintiffs and essentially to ignore evidence in the record that might be favorable to the defendant. See id. at 773, 820, 174 Cal. Rptr. at 359, 388. In fact, Ford's basic position at trial-which the court's opinion at no point mentions was that the approaching car (a Ford Galaxie) had not slowed down at all, and had struck the Gray car at a speed in excess of 50 miles per hour. There was an enormous amount of evidence at trial supporting each of the parties' factual claims as to the Galaxie's closing speed. Had the jury accepted Ford's speed estimate, there would not have been much of an issue of crashworthiness: for the plaintiffs' position throughout trial was that even a state-of-the-art fuel system could not maintain integrity in a 50 mile-per hour collision.

[109] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): pg 208

[110] Schwartz 1991:pg 1016

[111] Lee & Ermann 1999: Based on information given to it by lawyers preparing cases against Ford, the Center for Auto Safety petitioned NHTSA in the mid-1970s to investigate the Pinto's rear-end design. According to material presented on the Center's website, Dowie's article is based on that information, made available to him by the Center (www.autosafety.org). "Pinto Madness" is still available on the Mother Jones website along with a video clip showing a Pinto catching fire after being rear-ended. In an interview with Schwartz, Copp asserted that he was also a major source of the information for the Mother Jones story, Schwartz, "The Myth of the Ford Pinto Case," 1027, n.53

[112] Schwartz 1991: after deliberating for eight hours-awarded the Gray family wrongful death damages of $560,000; Grimshaw was awarded over $2.5 million in compensatory damages and $125 million in punitive damages as well. The trial judge reduced the punitive damage award to $3.5 million as a condition for denying a new trial. Two years later the court of appeal affirmed these results in all respects; the state supreme court then denied a hearing.

[113] Christian, Nichole M; Henderson, Angelo B; Nomani, Asra Q (October 9, 1997). "Chrysler is Told to Pay $262.5 Million by Jurors in Minivan-Accident Trial". The Wall Street Journal. p. 1. Retrieved March 4, 2016.

[latimes20080419-114] McLellan, Dennis (April 19, 2008). "Retired O.C. judge handled major cases". Los Angeles Times. Retrieved March 4, 2016.

[115] Danley 2005 harvnb error: multiple targets (2×): CITEREFDanley2005 (help): pg 209

[Williams-116] Williams, Carol J. (March 14, 2010). "Toyota is just the latest automaker to face auto safety litigation". Los Angeles Times. Retrieved March 4, 2016.

[117] Viscusi, W. Kip (February 2000). "Corporate Risk Analysis: A Reckless Act?" (PDF). Stanford Law Review. 52 (3): 569. doi:10.2307/1229473. hdl:1803/6556. JSTOR 1229473. The basic problem is that jurors do not undertake a comprehensive risk analysis approach, regardless of its character. Jurors have a tendency to compare the often very small per-unit safety cost with the costs borne by the injured victim. Rather than examine the entire market and the associated benefits and costs, jurors will be offended by, or will not fully understand, a comprehensive risk-analysis approach and will focus their assessment more narrowly on the identified victim and the costs of preventing that injury. The fact that these costs would also have been incurred for thousands of consumers who were not injured will not loom as large, as Judge Easterbrook emphasized. Thus, there is a tendency to exhibit "hindsight bias" rather than to consider the expected costs and expected benefits at the time of the safety decision.

[118] Viscusi, W. Kip (February 2000). "Corporate Risk Analysis: A Reckless Act?" (PDF). Stanford Law Review. 52 (3): 569. doi:10.2307/1229473. hdl:1803/6556. JSTOR 1229473.

[119] Schwartz, Gary T. (1982–1983). "Deterrence and Punishment in the Common Law of Punitive Damages: A Comment". Southern California Law Review: 134. The Court of Appeal's opinion thus suggested that the Court would have been equally willing to have affirmed the trial judge's decision had he either accepted the jury's $125 million award or reduced the award to $1 million. From a deterrence standpoint, it confounds understanding to permit such vast uncertainty as to the level of the expected penalty.

[120] Schwartz 1991: Hence, there was nothing clearly wrong in subjecting Ford to liability for harms resulting from that latter category of fires. The punitive damage award in the Ford Pinto case is, however, much more difficult to justify. To a large extent it rested on the premise that Ford had behaved reprehensibly when it balanced safety against cost in designing the Pinto. However, the process by which manufacturers render such trade-off design decisions seems not only to be anticipated but endorsed by the prevailing risk-benefit standard for design liability. Accordingly, the Pinto jury's decision that punitive damages were appropriate-a decision that was affirmed by the trial judge and the court of appeal-raises serious questions about the operational viability of the risk-benefit standard itself.

[121] Epstein 1980

[122] Becker, Jipson & Bruce 2002:There is little doubt about the importance of State of Indiana v. Ford Motor Company from a legal standpoint. This case was the first time criminal charges were bought against an American corporation for faulty product design. According to attorney Malcolm Wheeler (1981, p. 250), "[n]ewspapers referred to it as the most important economic case of the century ..." The notion that a corporation could be held accountable for its criminal actions was a novel legal concept at the time. Wheeler was not alone in his estimation of the case as influential. Because of the application of criminal law to corporate behavior, others have referred to this litigation as "unprecedented" (Welty, 1982) and as a "landmark case" (Clinard, 1990; Frank & Lynch, 1992; Hills, 1987; Maakestad, 1987). Maakestad (1987, p. 7) stated that the case "[r]eestablished an important precedent: In certain cases involving human health and safety, corporations and their executives could be required to submit not only to the scrutiny and sanctions of traditional federal regulatory agencies, but to state criminal courts as well."

[csm19800314-123] Dole, Charles E. (March 14, 1980). "Pinto verdict lets US industry off hook". The Christian Science Monitor. Retrieved March 3, 2016. An Indiana farm country jury in the 10-week landmark trial found Ford "not guilty" in the deaths of three teen-age girls whose 1973-model Pinto exploded when a speeding van struck it in the rear Aug. 10, 1978.

[124] Schwartz 1991:In August 1978-half a year after the verdict in the tort case-a 1973 Pinto was involved in a fatal crash in Ulrich, Indiana. Indiana public officials decided to prosecute Ford for the crime of reckless homicide. Because the reckless homicide statute had been enacted only in 1977, Ford could not be prosecuted for the reckless design of the Pinto; rather, the prosecution needed to show a reckless post-1977 failure by Ford to repair or warn. Largely because of the narrowness of the resulting issue, at trial the prosecution was not able to secure the admission of internal Ford documents on which it had hoped to build its case. Ford's defense effort in this criminal case was vastly more ambitious than the effort the company had previously mounted in defending itself against Grimshaw's tort claim. In March 1980 the Indiana jury found Ford not guilty. The jury seemed ambivalent about the Pinto, but concluded that Ford had avoided recklessness in the conduct of its recall program.

[125] Leviton, Joyce (February 4, 1980). "A Local D.A. Charges the Pinto with Murder—and Watergate's James Neal Comes to Its Defense". People. Vol. 13, no. 5. Retrieved March 3, 2016.

[126] Gladwell 2015: A former head of the N.H.T.S.A. testified on Ford's behalf, stating that in his opinion the Pinto's design was no more or less safe than that of any other car in its class, like the Chevrolet Vega or the A.M.C. Gremlin.

[127] Becker, Jipson & Bruce 2002

[128] Sherefkin 2003: The low point for Ford came in 1979 when Indiana authorities charged the automaker with reckless homicide in a criminal trial.

[129] Becker, Jipson & Bruce 2002:Two main perspectives emerged after the Pinto trial as to how the case outcome would affect future uses of criminal law against corporations for product liability issues. One viewpoint was stated by thenpresident of the National District Attorneys Association, Robert Johnson, Sr. He is quoted as saying "We'll see more prosecutions like this ... A psychological barrier has been broken, and the big corporations are now vulnerable" (Bodine, 1980, p. 3). The popular idea was that corporate malfeasance would be curtailed if corporations were held accountable for their actions. Thus, the feeling among some legal commentators was that the Pinto case represented a fundamental shift in how the criminal courts would perceive corporations. ... Another perspective was that the case was completely frivolous. Commenting on civil litigation, Harry Philo, then president-elect of the Association of American Trial Lawyers of America, commented that "In my opinion, the Pinto case was a completely irrelevant prosecution" (Stuart, 1980, p.4). However, he also stated that "[t]he verdict won't deter civil lawsuits" (Mleczko, 1980, llA).

[130] Epstein 1980:The important point here is that neither the drama of the case nor its outcome should be allowed to obscure the essential legal and institutional issues. On the record, this criminal prosecution should never have been brought at all.

[131] Becker, Jipson & Bruce 2002:The very fact that there has not been another product liability criminal prosecution since that case tells you one major impact of the case was ... [that] it said the criminal law is a very, very poor tool to use for product litigation. It's just not appropriate

[132] Becker, Jipson & Bruce 2002:Paul Weaver worked for the Ford Motor Company from 1978 to 1980 in the corporation's public affairs staff preparing company positions on public policy issues. He criticized Ford for how it dealt with the controversy surrounding the Pinto. According to Weaver (1988, p.94), "[t]he design of its [Pinto's] fuel system was essentially the same as that of other cars of its size and generation" and "Pintos had about the same rate of death from fire due to rear-end collision as other small cars." His assertion is that the Pinto was not unusual compared to similar models. Weaver admits that "[w]e should simply have told the truth about the car" and "[w]e did not fight to vindicate ourselves." Thus, by refusing to mount a major publicity campaign, Ford gave the impression that it was guilty. ... These remarks add an interesting dimension to the Pinto case in that one of the clear lessons was to confront issues raised about defective products. This concern illustrates that after the Pinto case, corporations became much more willing and adept at handling images stemming from poor design. In other words, the Pinto case made corporations much more willing to wage public relations battles over design and production flaws.

[nbc20130618-133] Spear, Gillian (June 18, 2013). "Take that back: Famous recalls, from Tylenol to Toyota". NBC News. Retrieved March 5, 2016. Three people died before the recall and six died in Pinto fires during the time following the recall but before the parts to repair the vehicle were made available.

[time20090702-134] "Top 10 Product Recalls". Time. July 2, 2009. Retrieved March 5, 2016.

[135] Huffman, John Pearley (February 12, 2010). "5 Most Notorious Recalls of All Time". Popular Mechanics. Retrieved March 5, 2016.

[Schwartz_1991-136] Schwartz 1991 Footnote pg 1029

[137] Schwartz 1991 pg 1031

[138] Schwartz 1991 pg 1033

[1]

[2]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

[32]

[33]

[34]

[35]

[36]

[37]

[38]

[39]

[40]

[41]

[42]

[43]

[44]

[45]

[46]

[47]

[48]

[49]

[50]

[51]

[52]

[53]

[54]

[55]

[56]

[57]

[58]

[59]

[60]

[61]

[62]

[63]

[64]

[65]

[66]

[67]

[68]

[69]

[70]

[71]

[72]

[73]

[74]

[75]

[76]

[77]

[78]

[79]

[80]

[81]

[82]

[83]

[84]

[85]

[86]

[87]

[88]

[89]

[90]

[91]

[92]

[93]

[94]

[95]

[96]

[97]

[98]

[99]

[100]

[101]

@@ Line 38: / Line 38: @@
 The '''Ford Pinto''' is a [[subcompact car]] that was manufactured and marketed by Ford Motor Company in North America, sold from the 1971 to the 1980 model years.  The smallest American Ford vehicle since 1907, the Pinto was the first subcompact vehicle produced by Ford in North America.
-The Pinto was marketed in three body styles through its production: a two-door fastback sedan with a trunk, a three-door hatchback, and a two-door station wagon.  [[Mercury (automobile)|Mercury]] offered rebadged versions of the Pinto as the '''Mercury Bobcat''' from 1975 to 1980 (1974–1980 in Canada<ref>Mays, James C. ''Ford and Canada: 100 Years Together'' (Montréal: Syam Publishing, 2003). p.116.</ref>). From 1974 to 1978, the [[Ford Mustang (second generation)|Ford Mustang II]] shared a common platform with the Pinto and Bobcat, though with a different unibody and powertrain assortment.  For the 1981 model year, the Pinto was replaced by the [[Ford Escort (North America)|Ford Escort]], as Ford transitioned its product line towards front-wheel drive. Over 3 million Pintos were produced over its 10-year production run, with the Ford Pinto and Mercury Bobcat produced at [[Edison Assembly]] (Edison, New Jersey), [[St. Thomas Assembly]] (Southwold, Ontario), and [[San Jose Assembly Plant|San Jose Assembly]] (Milpitas, California).<ref>{{cite news|url=http://sfgate.com/cgi-bin/article.cgi?f=/c/a/2006/03/25/HOG2UHS4701.DTL|title=Lofty ambition / Developer revs up former Ford factory in Richmond for real live-work spaces|last=Smith|first=Charles|date=March 25, 2006|work=The San Francisco Chronicle}}</ref>
+The Pinto was marketed in three body styles through its production: a two-door fastback sedan with a trunk, a three-door hatchback, and a two-door station wagon.  [[Mercury (automobile)|Mercury]] offered rebadged versions of the Pinto as the '''Mercury Bobcat''' from 1975 to 1980 (1974–1980 in Canada<ref>Mays, James C. ''Ford and Canada: 100 Years Together'' (Montréal: Syam Publishing, 2003). p.116.</ref>). From 1974 to 1978, the [[Ford Mustang (second generation)|Ford Mustang II]] shared a common platform with the Pinto and Bobcat, though with a different unibody and powertrain assortment.  For the 1981 model year, the Pinto was replaced by the [[Ford Escort (North America)|Ford Escort]], as Ford transitioned its product line towards front-wheel drive. Over 3 million Pintos were produced over its 10-year production run, the Pinto outproduced the combined totals of its domestic rivals, the Chevy Vega and the AMC Gremlin. The Pinto and Mercury Bobcat were produced at [[Edison Assembly]] (Edison, New Jersey), [[St. Thomas Assembly]] (Southwold, Ontario), and [[San Jose Assembly Plant|San Jose Assembly]] (Milpitas, California).<ref>{{cite news|url=http://sfgate.com/cgi-bin/article.cgi?f=/c/a/2006/03/25/HOG2UHS4701.DTL|title=Lofty ambition / Developer revs up former Ford factory in Richmond for real live-work spaces|last=Smith|first=Charles|date=March 25, 2006|work=The San Francisco Chronicle}}</ref>
 Since the 1970s, the safety reputation of the Pinto has been surrounded by controversy.  Its fuel-tank design attracted both media and government scrutiny after several deadly fires related to the tanks rupturing during rear-end collisions. A subsequent analysis of the overall safety of the Pinto suggested it was comparable to other 1970s subcompact cars.  The safety issues surrounding the Pinto and the subsequent response by Ford have been cited widely as a [[business ethics]] as well as [[tort reform]] case study.