Jump to content

MasterFormat: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Line 8: Line 8:


==Advantages==
==Advantages==
Standardizing the presentation of such information improves communication among all parties involved in construction projects. That helps the project team deliver structures to owners according to their requirements, timelines, and budgets. An indication of the widespread acceptance of MasterFormat is that the ASTM standard for sustainability assessment of building products relies on MasterFormat to organize the data.<ref>ASTM Standard E2129-05, 2005, "[http://www.astm.org/Standards/E2129.htm Standard Practice for Data Collection for Sustainability Assessment of Building Products]", [[ASTM International]], West Conshohocken, PA, 2005, {{doi|10.1520/E2129-05}}</ref> MasterFormat is an integral component of the SpecsIntact system. SpecsIntact (Specifications Kept Intact), is an automated specification processing system for preparing certain government facility construction projects using standard master specifications, called Master Text or Masters, supplied by each of three government agencies. SpecsIntact was developed by the National Aeronautics and Space Administration ([[NASA]]) and designed for use by engineers, architects, interior designers, specification writers, project managers and construction managers. The Naval Facilities Engineering Command ([[NAVFAC]]) and the Army Corps of Engineers ([[USACE]]) has also adopted SpecsIntact as their standard specifications system, greatly facilitating the effort to standardize construction specifications throughout these agencies.<ref>Morales, M. "SpecsIntact" National Aeronautics and Space Administration (NASA), Kennedy Space Center, FL 32899, website last accessed May 4, 2009. [http://specsintact.ksc.nasa.gov/webhelp/SIgeneral/MasterFormat_2004_Edition.htm]</ref> These services utilize MasterFormat from UFGS (United Facilities Guide Specification) sections found on the Whole Building Design Guide website.
Standardizing the presentation of such information improves communication among all parties involved in construction projects. That helps the project team deliver structures to owners according to their requirements, timelines, and budgets. ASTM standard for sustainability assessment of building products relies on MasterFormat to organize the data.<ref>ASTM Standard E2129-05, 2005, "[http://www.astm.org/Standards/E2129.htm Standard Practice for Data Collection for Sustainability Assessment of Building Products]", [[ASTM International]], West Conshohocken, PA, 2005, {{doi|10.1520/E2129-05}}</ref> MasterFormat is an integral organizational component of [[MasterSpec]], SpecText, and SpecsIntact systems. Several manufactures will also publish specifications for their products based on MasterFormat. Design teams will also maintain office master section based on MasterFormat. For construction projects in the [[United States]], design teams pull specifications based on MasterSpec, SpecText, office masters, and manufacture sections. MasterFormat provides the overall organizational structure that makes pulling sections from different sources possible. SpecsIntact is a specification processing system for preparing Unified Facilities Guide Specifications (UFGS)<ref>{{cite web |title=Unified Facilities Guide Specifications (UFGS) |url=https://www.wbdg.org/ffc/dod/unified-facilities-guide-specifications-ufgs |accessdate=18 December 2019}}</ref>. UFGS is required for design teams to use on [[United States Department of Defense]] and [[NASA]] construction projects. Using MasterFormat provides the design and construction teams a familiar organizational structure.


==Current Divisions (June 2018)==
==Current Divisions (June 2018)==

Revision as of 21:11, 18 December 2019

MasterFormat is a standard for organizing specifications and other written information for commercial and institutional building projects in the U.S. and Canada.[1] Sometimes referred to as the "Dewey Decimal System" of building construction, MasterFormat is a product of the Construction Specifications Institute (CSI) and Construction Specifications Canada (CSC). It provides a master list of Divisions, and Section numbers with associated titles within each Division, to organize information about a facility’s construction requirements and associated activities.[2]

MasterFormat is used throughout the construction industry to format specifications for construction contract documents. The purpose of this format is to assist the user to organize information into distinct groups when creating contract documents, and to assist the user searching for specific information in consistent locations. The information contained in MasterFormat is organized in a standardized outline format within 50 Divisions (16 Divisions pre-2004). Each Division is subdivided into a number of Sections.[3]

History

After World War II, building construction specifications began to expand, as more advanced materials and choices were made available.[4] The Construction Specifications Institute (CSI) was founded in 1948 and began to address the organization of specifications into a numbering system. In 1963, they published a format for construction specifications, with 16 major divisions of work. A 1975 CSI publication used the term MasterFormat. The last CSI MasterFormat publication to use the 16 divisions was in 1995, and this is no longer supported by CSI. In November 2004, MasterFormat expanded from 16 Divisions to 50 Divisions, reflecting innovations in the construction industry and expanding the coverage to a larger part of the construction industry.[5] Revised editions were published in 2010, 2011, 2012, 2014, 2016, and 2018.[5]

Advantages

Standardizing the presentation of such information improves communication among all parties involved in construction projects. That helps the project team deliver structures to owners according to their requirements, timelines, and budgets. ASTM standard for sustainability assessment of building products relies on MasterFormat to organize the data.[6] MasterFormat is an integral organizational component of MasterSpec, SpecText, and SpecsIntact systems. Several manufactures will also publish specifications for their products based on MasterFormat. Design teams will also maintain office master section based on MasterFormat. For construction projects in the United States, design teams pull specifications based on MasterSpec, SpecText, office masters, and manufacture sections. MasterFormat provides the overall organizational structure that makes pulling sections from different sources possible. SpecsIntact is a specification processing system for preparing Unified Facilities Guide Specifications (UFGS)[7]. UFGS is required for design teams to use on United States Department of Defense and NASA construction projects. Using MasterFormat provides the design and construction teams a familiar organizational structure.

Current Divisions (June 2018)

The current MasterFormat Divisions are:

PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP

  • Division 00 — Procurement and Contracting Requirements

SPECIFICATIONS GROUP

General Requirements Subgroup

  • Division 01 — General Requirements

Facility Construction Subgroup

  • Division 02 — Existing Conditions
  • Division 03 — Concrete
  • Division 04 — Masonry
  • Division 05 — Metals
  • Division 06 — Wood, Plastics, and Composites
  • Division 07 — Thermal and Moisture Protection
  • Division 08 — Openings
  • Division 09 — Finishes
  • Division 10 — Specialties
  • Division 11 — Equipment
  • Division 12 — Furnishings
  • Division 13 — Special Construction
  • Division 14 — Conveying Equipment
  • Division 15 — RESERVED FOR FUTURE EXPANSION
  • Division 16 — RESERVED FOR FUTURE EXPANSION
  • Division 17 — RESERVED FOR FUTURE EXPANSION
  • Division 18 — RESERVED FOR FUTURE EXPANSION
  • Division 19 — RESERVED FOR FUTURE EXPANSION

Facility Services Subgroup:

  • Division 20 — RESERVED FOR FUTURE EXPANSION
  • Division 21 — Fire Suppression
  • Division 22 — Plumbing
  • Division 23 — Heating, Ventilating, and Air Conditioning (HVAC)
  • Division 24 — RESERVED FOR FUTURE EXPANSION
  • Division 25 — Integrated Automation
  • Division 26 — Electrical
  • Division 27 — Communications
  • Division 28 — Electronic Safety and Security
  • Division 29 — RESERVED FOR FUTURE EXPANSION

Site and Infrastructure Subgroup:

  • Division 30 — RESERVED FOR FUTURE EXPANSION
  • Division 31 — Earthwork
  • Division 32 — Exterior Improvements
  • Division 33 — Utilities
  • Division 34 — Transportation
  • Division 35 — Waterway and Marine Construction
  • Division 36 — RESERVED FOR FUTURE EXPANSION
  • Division 37 — RESERVED FOR FUTURE EXPANSION
  • Division 38 — RESERVED FOR FUTURE EXPANSION
  • Division 39 — RESERVED FOR FUTURE EXPANSION

Process Equipment Subgroup:

  • Division 40 — Process Interconnections
  • Division 41 — Material Processing and Handling Equipment
  • Division 42 — Process Heating, Cooling, and Drying Equipment
  • Division 43 — Process Gas and Liquid Handling, Purification and Storage Equipment
  • Division 44 — Pollution and Waste Control Equipment
  • Division 45 — Industry-Specific Manufacturing Equipment
  • Division 46 — Water and Wastewater Equipment
  • Division 47 — RESERVED FOR FUTURE EXPANSION
  • Division 48 — Electrical Power Generation
  • Division 49 — RESERVED FOR FUTURE EXPANSION

Pre-2012 Divisions

MASTERFORMAT 2004 EDITION

Same as MasterFormat 2014, except the following:

  • Division 40 — Process Integration

MASTERFORMAT 1995 EDITION

Same as MasterFormat 1988 except the following:

  • Division 2 — Site Construction

MASTERFORMAT 1988 EDITION

Before November 2004, MasterFormat was composed of 16 Divisions:

  • Division 1 — General Requirements
  • Division 2 — Sitework
  • Division 3 — Concrete
  • Division 4 — Masonry
  • Division 5 — Metals
  • Division 6 — Wood and Plastics
  • Division 7 — Thermal and Moisture Protection
  • Division 8 — Doors and Windows
  • Division 9 — Finishes
  • Division 10 — Specialties
  • Division 11 — Equipment
  • Division 12 — Furnishings
  • Division 13 — Special Construction
  • Division 14 — Conveying Systems
  • Division 15 — Mechanical (Ex. Plumbing and HVAC)
  • Division 16 — Electrical

SectionFormat is a standard for organizing information within each Section. A Section is divided into three Parts—"general," "products," and "execution." Each Part is further organized into a system of Articles and Paragraphs.

A relatively new strategy to classify the built environment, named OmniClass,[8] incorporates the work results classification in its Table 22 Work Results.

References

  1. ^ Mowrer, F. "Development of the fire Data Management System" Department of Fire Protection and Engineering, NIST-GCR-94-693, August 1993.
  2. ^ Charette, R. and Marshall, A. "Uniformat II Elemental classification for Building Specifications, Cost Estimating, and Cost Analysis," NIST BFRL Office of applied Economics, NISTIR6389, October 1999.
  3. ^ Ross Spiegel and Dru Meadows, Green Building Materials: A Guide to Product Selection and Specification, John Wiley & Sons, Inc., New York, 1999.
  4. ^ Clendining, Warren (2009). "History of Specifications". Technical Expressions. Archived from the original on 22 March 2013. Retrieved 28 May 2017.
  5. ^ a b "What's My MasterFormat Number?". CSI. Retrieved 28 May 2017.
  6. ^ ASTM Standard E2129-05, 2005, "Standard Practice for Data Collection for Sustainability Assessment of Building Products", ASTM International, West Conshohocken, PA, 2005, doi:10.1520/E2129-05
  7. ^ "Unified Facilities Guide Specifications (UFGS)". Retrieved 18 December 2019.
  8. ^ "OmniClass". OmniClass. OCCS Development Committee Secretariat. Retrieved 28 May 2017.