Flame: Difference between revisions
CLCStudent (talk | contribs) m Reverted edits by 2600:1003:B122:DB0B:3057:4580:8BD8:3C7C (talk) to last version by GameEnd |
m Corrected the discussion that suggested flames with soot are too cool to cause any blue emissions from radicals. |
||
| Line 23: | Line 23: | ||
Flame color depends on several factors, the most important typically being [[black-body radiation]] and [[spectral band]] emission, with both [[spectral line]] emission and spectral line absorption playing smaller roles. In the most common type of flame, [[hydrocarbon]] flames, the most important factor determining color is oxygen supply and the extent of fuel-oxygen pre-mixing, which determines the [[Burn rate (chemistry)|rate of combustion]] and thus the temperature and reaction paths, thereby producing different color hues. |
Flame color depends on several factors, the most important typically being [[black-body radiation]] and [[spectral band]] emission, with both [[spectral line]] emission and spectral line absorption playing smaller roles. In the most common type of flame, [[hydrocarbon]] flames, the most important factor determining color is oxygen supply and the extent of fuel-oxygen pre-mixing, which determines the [[Burn rate (chemistry)|rate of combustion]] and thus the temperature and reaction paths, thereby producing different color hues. |
||
In a [[laboratory]] under normal [[gravity]] conditions and with a closed |
In a [[laboratory]] under normal [[gravity]] conditions and with a closed air inlet, a [[Bunsen burner]] burns with yellow flame (also called a safety flame) with a peak temperature of about {{convert|2000|K|F|-2|abbr=}}. The yellow arises from [[incandescence]] of very fine [[soot]] particles that are produced in the flame. When the air inlet is opened, less soot is produced. When enough air is supplied, no soot is produced and the flame becomes blue. (Most of this blue had previously been obscured by the bright yellow emissions.) The spectrum of a premixed (complete combustion) [[butane]] flame on the right shows that the blue color arises specifically due to emission of excited [[molecular]] [[radical (chemistry)|radicals]] in the flame, which emit most of their light well below ≈565 nanometers in the blue and green regions of the [[visible spectrum]]. |
||
The colder part of a diffusion (incomplete combustion) flame will be red, transitioning to orange, yellow, and white as the temperature increases as evidenced by changes in the [[black-body radiation]] spectrum. For a given flame's region, the closer to white on this scale, the hotter that section of the flame is. The transitions are often apparent in fires, in which the color emitted closest to the fuel is white, with an orange section above it, and reddish flames the highest of all.<ref name=temp/> A blue-colored flame only emerges when the amount of [[soot]] decreases and the [[Swan band|blue emissions]] from excited molecular radicals become dominant, though the blue can often be seen near the base of candles where airborne soot is less concentrated.<ref>{{cite book|url=https://books.google.com/books?id=hadB8msSl1EC&pg=PA172|page=172|title=Combustion Phenomena: Selected Mechanisms of Flame Formation, Propagation and Extinction|author1=Jozef Jarosinski|author2=Bernard Veyssiere|publisher=CRC Press|year=2009|isbn=0-8493-8408-7|url-status=live|archiveurl=https://web.archive.org/web/20171208204859/https://books.google.com/books?id=hadB8msSl1EC&pg=PA172|archivedate=8 December 2017|df=dmy-all}}</ref> |
The colder part of a diffusion (incomplete combustion) flame will be red, transitioning to orange, yellow, and white as the temperature increases as evidenced by changes in the [[black-body radiation]] spectrum. For a given flame's region, the closer to white on this scale, the hotter that section of the flame is. The transitions are often apparent in fires, in which the color emitted closest to the fuel is white, with an orange section above it, and reddish flames the highest of all.<ref name=temp/> A blue-colored flame only emerges when the amount of [[soot]] decreases and the [[Swan band|blue emissions]] from excited molecular radicals become dominant, though the blue can often be seen near the base of candles where airborne soot is less concentrated.<ref>{{cite book|url=https://books.google.com/books?id=hadB8msSl1EC&pg=PA172|page=172|title=Combustion Phenomena: Selected Mechanisms of Flame Formation, Propagation and Extinction|author1=Jozef Jarosinski|author2=Bernard Veyssiere|publisher=CRC Press|year=2009|isbn=0-8493-8408-7|url-status=live|archiveurl=https://web.archive.org/web/20171208204859/https://books.google.com/books?id=hadB8msSl1EC&pg=PA172|archivedate=8 December 2017|df=dmy-all}}</ref> |
||
Revision as of 18:26, 29 January 2020
A flame (from Latin flamma) is the visible, gaseous part of a fire. It is caused by a highly exothermic reaction taking place in a thin zone.[1] Very hot flames are hot enough to have ionized gaseous components of sufficient density to be considered plasma.[vague][citation needed]
Mechanism
Color and temperature of a flame are dependent on the type of fuel involved in the combustion, as, for example, when a lighter is held to a candle. The applied heat causes the fuel molecules in the candle wax to vaporize (If this process happens in inert atmosphere without oxidizer, it's called pyrolysis). In this state they can then readily react with oxygen in the air, which gives off enough heat in the subsequent exothermic reaction to vaporize yet more fuel, thus sustaining a consistent flame. The high temperature of the flame causes the vaporized fuel molecules to decompose, forming various incomplete combustion products and free radicals, and these products then react with each other and with the oxidizer involved in the reaction. One may investigate all the different parts of the flame from a candle with a cold metal spoon[2]: Higher parts are water vapor, the end result of combustion; Yellow parts in the middle are soot; Down just next to the candle wick is unburned wax. Sufficient energy in the flame will excite the electrons in some of the transient reaction intermediates such as the methylidyne radical (CH) and diatomic carbon (C2), which results in the emission of visible light as these substances release their excess energy (see spectrum below for an explanation of which specific radical species produce which specific colors). As the combustion temperature of a flame increases (if the flame contains small particles of unburnt carbon or other material), so does the average energy of the electromagnetic radiation given off by the flame (see Black body).
Other oxidizers besides oxygen can be used to produce a flame. Hydrogen burning in chlorine produces a flame and in the process emits gaseous hydrogen chloride (HCl) as the combustion product.[3] Another of many possible chemical combinations is hydrazine and nitrogen tetroxide which is hypergolic and commonly used in rocket engines. Fluoropolymers can be used to supply fluorine as an oxidizer of metallic fuels, e.g. in the magnesium/teflon/viton composition.
The chemical kinetics occurring in the flame are very complex and typically involve a large number of chemical reactions and intermediate species, most of them radicals. For instance, a well-known chemical kinetics scheme, GRI-Mech,[4] uses 53 species and 325 elementary reactions to describe combustion of biogas.
There are different methods of distributing the required components of combustion to a flame. In a diffusion flame, oxygen and fuel diffuse into each other; the flame occurs where they meet. In a premixed flame, the oxygen and fuel are premixed beforehand, which results in a different type of flame. Candle flames (a diffusion flame) operate through evaporation of the fuel which rises in a laminar flow of hot gas which then mixes with surrounding oxygen and combusts.
Color
Flame color depends on several factors, the most important typically being black-body radiation and spectral band emission, with both spectral line emission and spectral line absorption playing smaller roles. In the most common type of flame, hydrocarbon flames, the most important factor determining color is oxygen supply and the extent of fuel-oxygen pre-mixing, which determines the rate of combustion and thus the temperature and reaction paths, thereby producing different color hues.
In a laboratory under normal gravity conditions and with a closed air inlet, a Bunsen burner burns with yellow flame (also called a safety flame) with a peak temperature of about 2,000 K (3,100 °F). The yellow arises from incandescence of very fine soot particles that are produced in the flame. When the air inlet is opened, less soot is produced. When enough air is supplied, no soot is produced and the flame becomes blue. (Most of this blue had previously been obscured by the bright yellow emissions.) The spectrum of a premixed (complete combustion) butane flame on the right shows that the blue color arises specifically due to emission of excited molecular radicals in the flame, which emit most of their light well below ≈565 nanometers in the blue and green regions of the visible spectrum.
The colder part of a diffusion (incomplete combustion) flame will be red, transitioning to orange, yellow, and white as the temperature increases as evidenced by changes in the black-body radiation spectrum. For a given flame's region, the closer to white on this scale, the hotter that section of the flame is. The transitions are often apparent in fires, in which the color emitted closest to the fuel is white, with an orange section above it, and reddish flames the highest of all.[5] A blue-colored flame only emerges when the amount of soot decreases and the blue emissions from excited molecular radicals become dominant, though the blue can often be seen near the base of candles where airborne soot is less concentrated.[6]
Specific colors can be imparted to the flame by introduction of excitable species with bright emission spectrum lines. In analytical chemistry, this effect is used in flame tests to determine presence of some metal ions. In pyrotechnics, the pyrotechnic colorants are used to produce brightly colored fireworks.
Temperature
When looking at a flame's temperature there are many factors which can change or apply. An important one is that a flame's color does not necessarily determine a temperature comparison because black-body radiation is not the only thing that produces or determines the color seen; therefore it is only an estimation of temperature. Other factors that determine its temperature are:
- Adiabatic flame; i.e., no loss of heat to the atmosphere (may differ in certain parts)
- Atmospheric pressure
- Percentage oxygen content of the atmosphere
- The kind of fuel used (i.e., depends on how quickly the process occurs; how violent the combustion is)
- Any oxidation of the fuel
- Temperature of atmosphere links to adiabatic flame temperature (i.e., heat will transfer to a cooler atmosphere more quickly)
- How stoichiometric the combustion process is (a 1:1 stoichiometricity) assuming no dissociation will have the highest flame temperature; excess air/oxygen will lower it as will lack of air/oxygen
In fires (particularly house fires), the cooler flames are often red and produce the most smoke. Here the red color compared to typical yellow color of the flames suggests that the temperature is lower. This is because there is a lack of oxygen in the room and therefore there is incomplete combustion and the flame temperature is low, often just 600 to 850 °C (1,112 to 1,562 °F). This means that a lot of carbon monoxide is formed (which is a flammable gas) which is when there is greatest risk of backdraft. When this occurs, combustible gases at or above the flash point of spontaneous combustion are exposed to oxygen, carbon monoxide and superheated hydrocarbons combust, and temporary temperatures of up to 2,000 °C (3,630 °F) occur.[citation needed]
Common temperatures
 | This section possibly contains original research. (December 2019) |
This is a rough guide to flame temperatures for various common substances (in 20 °C (68 °F) air at 1 atm. pressure):
| Material burned | Flame temperature |
|---|---|
| Charcoal fire | 750–1,200 °C (1382-2192 °F) |
| Methane (natural gas) | 900–1,500 °C (1652-2732 °F) |
| Bunsen burner flame | 900–1,600 °C (1652-2912 °F) [depending on the air valve, open or close.] |
| Candle flame | ≈1,100 °C (≈2012 °F) [majority], hot spots may be 1300–1400 (2372-2552 °F) |
| Propane blowtorch | 1,200–1,700 °C (2192-3092 °F) |
| Backdraft flame peak | 1,700–1,950 °C (3092-3542 °F) |
| Magnesium | 1,900–2,300 °C (3452-4172 °F) |
| Hydrogen torch | Up to ≈2,000 °C (≈3632 °F) |
| MAPP gas | 2,020 °C (3668 °F) |
| Acetylene blowlamp/blowtorch | Up to ≈2,300 °C (≈4172 °F) |
| Oxyacetylene | Up to 3,300 °C (5972 °F) |
| Material burned | Max. flame temperature (in air, diffusion flame)[5] |
|---|---|
| Animal fat | 800–900 °C (1472-1652 °F) |
| Kerosene | 990 °C (1814 °F) |
| Gasoline | 1,026 °C (1878.8 °F) |
| Wood | 1,027 °C (1880.6 °F) |
| Methanol | 1,200 °C (2192 °F) |
| Charcoal (forced draft) | 1,390 °C (2534 °F) |
Highest temperature
Dicyanoacetylene, a compound of carbon and nitrogen with chemical formula C4N2 burns in oxygen with a bright blue-white flame at a temperature of 5,260 K (4,990 °C; 9,010 °F), and at up to 6,000 K (5,730 °C; 10,340 °F) in ozone.[7] This high flame temperature is partially due to the absence of hydrogen in the fuel (dicyanoacetylene is not a hydrocarbon) thus there is no water among the combustion products.
Cyanogen, with the formula (CN)2, produces the second-hottest-known natural flame with a temperature of over 4,525 °C (8,177 °F) when it burns in oxygen.[8][9]
Cool flames
At temperatures as low as 120 °C (248 °F), fuel-air mixtures can react chemically and produce very weak flames called cool flames. The phenomenon was discovered by Humphry Davy in 1817. The process depends on a fine balance of temperature and concentration of the reacting mixture, and if conditions are right it can initiate without any external ignition source. Cyclical variations in the balance of chemicals, particularly of intermediate products in the reaction, give oscillations in the flame, with a typical temperature variation of about 100 °C (212 °F), or between "cool" and full ignition. Sometimes the variation can lead to an explosion.[10][11]
In microgravity
In the year 2000, experiments by NASA confirmed that gravity plays an indirect role in flame formation and composition.[12] The common distribution of a flame under normal gravity conditions depends on convection, as soot tends to rise to the top of a flame (such as in a candle in normal gravity conditions), making it yellow. In microgravity or zero gravity environment, such as in orbit, natural convection no longer occurs and the flame becomes spherical, with a tendency to become bluer and more efficient. There are several possible explanations for this difference, of which the most likely is the hypothesis that the temperature is sufficiently evenly distributed that soot is not formed and complete combustion occurs.[13] Experiments by NASA reveal that diffusion flames in microgravity allow more soot to be completely oxidized after they are produced than do diffusion flames on Earth, because of a series of mechanisms that behave differently in microgravity when compared to normal gravity conditions.[14] These discoveries have potential applications in applied science and industry, especially concerning fuel efficiency.
Thermonuclear flames
Flames do not need to be driven only by chemical energy release. In stars, subsonic burning fronts driven by burning light nuclei (like carbon or helium) to heavy nuclei (up to iron group) propagate as flames. This is important in some models of Type Ia supernovae. In thermonuclear flames, thermal conduction dominates over species diffusion, so the flame speed and thickness is determined by the thermonuclear energy release and thermal conductivity (often in the form of degenerate electrons).[15]
See also
- Combustion
- Flame detector
- Flame test
- International Flame Research Foundation
- Oxidizing and reducing flames
- The Combustion Institute
References
- ^ Law, C. K. (2006). "Laminar premixed flames". Combustion physics. Cambridge, England: Cambridge University Press. p. 300. ISBN 0-521-87052-6. Archived from the original on 8 December 2017.
- ^ What Is Fire?, retrieved 27 November 2019
- ^ "Reaction of Chlorine with Hydrogen". Archived from the original on 20 August 2008.
- ^ Gregory P. Smith; David M. Golden; Michael Frenklach; Nigel W. Moriarty; Boris Eiteneer; Mikhail Goldenberg; C. Thomas Bowman; Ronald K. Hanson; Soonho Song; William C. Gardiner, Jr.; Vitali V. Lissianski; Zhiwei Qin. "GRI-Mech 3.0". Archived from the original on 29 October 2007. Retrieved 8 November 2007.
- ^ a b Christopher W. Schmidt; Steve A. Symes (2008). The analysis of burned human remains. Academic Press. pp. 2–4. ISBN 0-12-372510-0. Archived from the original on 8 December 2017.
- ^ Jozef Jarosinski; Bernard Veyssiere (2009). Combustion Phenomena: Selected Mechanisms of Flame Formation, Propagation and Extinction. CRC Press. p. 172. ISBN 0-8493-8408-7. Archived from the original on 8 December 2017.
- ^ Kirshenbaum, A. D.; A. V. Grosse (May 1956). "The Combustion of Carbon Subnitride, NC4N, and a Chemical Method for the Production of Continuous Temperatures in the Range of 5000–6000°K". Journal of the American Chemical Society. 78 (9): 2020. doi:10.1021/ja01590a075.
- ^ Thomas, N.; Gaydon, A. G.; Brewer, L. (1952). "Cyanogen Flames and the Dissociation Energy of N2". The Journal of Chemical Physics. 20 (3): 369–374. Bibcode:1952JChPh..20..369T. doi:10.1063/1.1700426.
- ^ J. B. Conway; R. H. Wilson Jr.; A. V. Grosse (1953). "THE TEMPERATURE OF THE CYANOGEN-OXYGEN FLAME". Journal of the American Chemical Society. 75 (2): 499. doi:10.1021/ja01098a517.
- ^ Pearlman, Howard; Chapek, Richard M. (24 April 2000). "Cool Flames and Autoignition in Microgravity". NASA. Archived from the original on 1 May 2010. Retrieved 13 May 2010.
- ^ Jones, John Clifford (September 2003). "Low temperature oxidation". Hydrocarbon process safety: a text for students and professionals. Tulsa, OK: PennWell. pp. 32–33. ISBN 978-1-59370-004-1.
- ^ Spiral flames in microgravity Archived 19 March 2010 at the Wayback Machine, National Aeronautics and Space Administration, 2000.
- ^ Candle Flame in Microgravity Archived 26 October 2011 at the Wayback Machine. NASA
- ^ C. H. Kim et al. Laminar Soot Processes Experiment Shedding Light on Flame Radiation Archived 11 January 2014 at the Wayback Machine. NASA, HTML Archived 20 July 2012 at the Wayback Machine
- ^ F. X. Timmes and S. E. WoosleyThe conductive propagation of nuclear flames. I - Degenerate C + O and O + NE + MG white dwarfs
External links
- A candle flame strongly influenced and moved about by an electric field due to the flame having ions.
- Ultra-Low Emissions Low-Swirl Burner
- 7 Shades of Fire
- Licence, Peter. "Coloured Flames". The Periodic Table of Videos. University of Nottingham.
| History | |
|---|---|
| Science | |
| Components | |
| Individual fires | |
| Crime | |
| People | |
| Culture | |
| Organizations | |
| Other | |
