Wikipedia:Bots/Requests for approval/Jmax-bot: Difference between revisions

Browse history interactively

← Previous edit Next edit →

Content deleted Content added

VisualWikitext

Inline

Revision as of 07:50, 15 December 2006

Jmax-bot

Operator: Jmax-

Automatic or Manually Assisted: Automatic

Programming Language(s): Perl, WWW::Mechanize

Function Summary: WP:FA counting

Edit period(s) (e.g. Continuous, daily, one time run): Daily

Edit rate requested: 1 edit per day

Already has a bot flag (Y/N): N

Function Details: Currently, it merely counts the number of Featured Articles and places them on User:Jmax-bot/FACounter, as per this request by User:BanyanTree. Perhaps more at a future date, pending any requests.

Discussion

Quick question - can you explain a little about the whitelist? (And how a newly registered account can't mess it up by making a vandalism at the right moment). Also, if/when it is given the admin flag, I assume it can be retargetted at template:FA number, right? Raul654 03:43, 11 December 2006 (UTC)[reply]

From the example here:

One question. What happens if an RC patroller reverts the vandalism? Neither UserA nor VandalReverter would be on the whitelist... what would the bot do then? Tito xd^(?!?) 04:30, 11 December 2006 (UTC)[reply]
Another question: non-admin users routinely change the categories or names (to fix redirects) of featured articles: if the last edit is not an admin or a whitelist user, what will the bot do? (Thanks so much for the help, Jmax.) Sandy (Talk) 04:32, 11 December 2006 (UTC)[reply]

The bot does not currently support any whitelist, as I was expecting to encounter issues, such as these, that I had not previously prepare for, and it would have been a waste of resources to design a system without fully understanding the requirements. So, I was thinking that in the event the current revision was not made by a whitelisted user, the bot would check the last 5 or so revisions, and comparing them for differences, and attempting to determine if any vandalism had occurred (perhaps someone could clue me in on a good method of determining vandalism). Of course, this introduces some faults: the implementation of the vandalism detection may not, and probably will not, be perfect; as well as the issue of attempting to craft a perfect whitelist for a community-contributed project. Thoughts? --Jmax- 07:16, 11 December 2006 (UTC)[reply]

Hi Jmax-, Thanks for all your work on this. Last night, I came up with an example of how the whitelist might work with a 15 minute wait after an edit by an editor not on the whitelist on the FA talk page, which I'll paste here for convenient reference:

11:30: AdminX removes two articles as part of FARC

11:58: UserA blanks the page.

12:00: The bot checks the page, sees that UserA is not on the whitelist and waits

12:02: WhitelistedUserB reverts the vandalism by UserA to the version by AdminX

12:15: 15 minutes having elapsed, the bot checks again. It sees that the last editor was whitelisted and updates the count.

Both Titoxd and Sandy both make good points above in response. Sandy's point can perhaps be addressed by having the bot check for changes to the FA number, rather than any change at all. So for example: (I have commented out my extended examples in the interests of keeping the viewed page to a manageable size. - Banyan Tree 15:14, 12 December 2006 (UTC))[reply]

My thought is that the vandal spoofing feature is to stop ridiculous changes to the number. An additional feature throttling changes to 5% or less may do that, while the whitelist check and pause greatly reduces the chances of a bad change going through at all. (The FA regulars can state if an update has ever involved a greater proportion than that.) I'm not sure that the effort involved in a technical solution comparing a user who removes an article and one who reverts him, and trying to decide who is correct, is worth the effort. Thoughts on this?

Also, the discussion at Wikipedia talk:Featured articles suggested an update closer to every hour. Is that possible? - Banyan Tree 13:30, 11 December 2006 (UTC)[reply]

I have a simple suggestion which should be relatively simple to code (simpler than most of the above suggestions). If we have to choose between having the count slightly stale, or allowing vandals the opportunity to vandalize it, I think it's obvious everyone here would choose the former. Bearing that in mind, I suggest: run the bot once an hour. When it runs, it goes to the page history, and selects the last version by a trusted user, and generates the count based on that version. (Only three users regularly add/remove articles from that page - myself, Marskell, and Joel. For now, that should suffice as a list) This technique is 100% vandalproof and should produce very accurate results. Raul654 16:55, 11 December 2006 (UTC)[reply]

I'll think further on it, but Raul's plan seems to make sense, since the only users who change the number (add or delete FAs per FAC or FARC) are Raul, Joelr31 and Marskell, while other users may make other sorts of changes. A recent (but rare) example: an admin deleted his own featured article, although there had been no FAR. The bot (as proposed) would have allowed that (someone caught it manually). If the count is based on Joelr31, Marskell, and Raul, it will stay accurate. I believe. I track the changes, but if I see a problem, I could alert one of them. Sandy (Talk) 18:20, 11 December 2006 (UTC)[reply]

I'm a little lost having been out of the loop for a while, but as far as I'm understanding this, Raul's suggestion makes sense. The people taking care of the numbers are pretty close knit and careful about things, and I don't think anything will slip by. Marskell 22:36, 11 December 2006 (UTC)[reply]

Ok, that is what I have gone with. It will search the last 15 revisions for the latest revision by any of Raul654, Marskell, or Joelr31. It will then use that revision as the count. See the updated debug report on User:Jmax-bot/FACounter for an example --Jmax- 09:14, 12 December 2006 (UTC)[reply]

Looks good - nice work! Sandy (Talk) 09:21, 12 December 2006 (UTC)[reply]

(reindent)Yes, that is much simpler (aka better) than what I was thinking. Final-ish questions: (1) can you set it to run hourly and (2) do you foresee any problems with adding Template:FA number as another target, since the page with the update times and list of articles is useful. Banyan Tree 15:14, 12 December 2006 (UTC)[reply]

It is currently running hourly, and, adding another target is no problem whatsoever. --Jmax- 03:24, 13 December 2006 (UTC)[reply]

I also have one final question - what happens if it scans through the past 15 revisions and doesn't find one by myself, Joel, or Marskell? Presumably, it should do nothing in that case. Raul654 21:32, 12 December 2006 (UTC)[reply]

You presume correctly. Perhaps I should go one step further to make it post on the talk page in that case, or some other way to notify you three in that situtation (currently it merely prints an error). --Jmax- 22:39, 12 December 2006 (UTC)[reply]

That seems excessive, as it would mean about 23 talk posts a day given that the total on WP:FA changes at best once in 24 hrs. The update will show up on watchlists? That should be oversight enough. Marskell 03:45, 13 December 2006 (UTC)[reply]

I think Jmax means that if of the last 15 revisons to WP:FA, none are by either one of you three, to ask at WT:FA? That would be a good idea. The only thing I would like for it is to store in memory the revision_id of the last edit it processed, so if indeed hell freezes over and no "authorized user" edits the page substantially, it doesn't warn over and over again every hour. Tito xd^(?!?) 07:48, 14 December 2006 (UTC)[reply]

That's a given. So, what is the status on this? The bot is ready, and has been for some time. Oh, another question: Should I expand the bot to count WP:GA? --Jmax- 09:46, 14 December 2006 (UTC)[reply]

I would think GA would be pretty hard to count, because anyone can add and delete. If you're offering to expand, WIkipedia:Former featured articles has a count in the text which myself, Joelr31 and Marskell are keeping manually. The structure of the article is very similar to WP:FA, except that there is a comment field for tally by area, which is a hassle. Sandy (Talk) 12:34, 14 December 2006 (UTC)[reply]

(reindent)It depends on if you want the vandal-spoofing feature, the lack of which is a total deal breaker if the number appears on the Main Page. It would be nice to be able to transclude a FFA count, perhaps to a Template:FFA number with a commented section like {{FA number}}, as a way for final troubleshooting. Otherwise, I'm running out of questions. - Banyan Tree 14:05, 14 December 2006 (UTC)[reply]

I've updated the debug report to include a list of whitelisted users. I have also added FFA counts. See User:Jmax-bot/FFACounter --Jmax-

Sweet! Can you have the bot put the most recent FFA number into Template:FFA number? We can then transclude the number back into WP:FFA, so people can avoid the manual update. Thanks! - Banyan Tree 01:53, 15 December 2006 (UTC)[reply]

This is great, Jmax. My count on FFAs is one off from the bot, so as I soon as I finish up some other work, I'll run through that and see what's up. Thanks so much. Back to you later, Sandy (Talk) 02:00, 15 December 2006 (UTC)[reply]

Please make sure that there are no "red herrings" in the FFA count debug. It only checks for links between two specified boundaries, and could possibly pick up false positives. I'll run it right now for you. --Jmax- 02:07, 15 December 2006 (UTC)[reply]

I see WP:FA in the bot count, which appears to coming from the link in the final section header, "Former featured articles that have been re-promoted". - Banyan Tree 02:14, 15 December 2006 (UTC)[reply]

I just finished the other stuff I was working on - is it solved, then, or should I have a look? If the bot is going to be counting, I'm going to delete those goofy commented subcounts by section, which are a chore. Sandy (Talk) 03:19, 15 December 2006 (UTC)[reply]

Yes, that was it; it was counting the WP:FA in the heading. Sandy (Talk) 03:30, 15 December 2006 (UTC)[reply]

Status - As I told Jmax, I'm letting it run for a few days. If nothing problematic happens (and so far, nothing has) then I'm going to set the bot and sysop flags on the Jmax bot account, and then all Jmax has to do is set it to target the FA num template. Raul654 18:52, 14 December 2006 (UTC)[reply]

Note - I promoted two FAs today and it worked like a charm Raul654 20:17, 14 December 2006 (UTC)[reply]

Of course! --Jmax- 01:42, 15 December 2006 (UTC)[reply]

Ok, thanks for your help BT! I've made the change and it's updated now. --Jmax- 04:53, 15 December 2006 (UTC)[reply]

Anything w/ sysop privs needs full code published. If anyone read the massive TawkerbotTorA discussion, sysop bots are not exactly a ordinary thing, it's not something any 'crat can just set rights on. At the very least, the code for this one needs to be published -- Tawker 07:50, 15 December 2006 (UTC)[reply]

Revision as of 04:53, 15 December 2006 edit Jmax- (talk \| contribs) 910 edits →Discussion ← Previous edit		Revision as of 07:50, 15 December 2006 edit undo Tawker (talk \| contribs) Administrators 18,670 edits →Discussion: bots w/ sysop, hold off raul Next edit →
Line 100:		Line 100:

	Ok, thanks for your help BT! I've made the change and it's updated now. --[[User:Jmax-\|Jmax-]] 04:53, 15 December 2006 (UTC)		Ok, thanks for your help BT! I've made the change and it's updated now. --[[User:Jmax-\|Jmax-]] 04:53, 15 December 2006 (UTC)

			'''Anything w/ sysop privs''' needs full code published. If anyone read the massive TawkerbotTorA discussion, sysop bots are not exactly a ordinary thing, it's not something any 'crat can just set rights on. At the very least, the code for this one needs to be published -- [[User:Tawker\|Tawker]] 07:50, 15 December 2006 (UTC)