Riley RM

Riley RM Series
Overview
Manufacturer	Riley
Production	1945–55
Body and chassis
Class	Executive car (E)
Body style	4-door saloon 2-door open 2 or 3-seater 2-door 4-seater cabriolet
Layout	FR layout
Dimensions
Wheelbase	1.5 L cars – 112 in (2,845 mm) 2.5 L cars – 119 in (3,023 mm)
Length	1.5 L cars – 179 in (4,547 mm) 2.5 L cars – 186 in (4,724 mm)
Width	63 in (1,600 mm)
Height	59 in (1,499 mm)
Chronology
Predecessor	Riley Kestrel body and 12/4 1½-litre engine or 16/4 2½-litre Big Four engine
Successor	Riley Pathfinder

The Riley RM Series is an executive car which was produced by Riley from 1945 to 1955. It was the last model developed independently by Riley prior to the 1952 merger of Riley's still new owner Nuffield, with Austin to form BMC. The RM series was originally produced in Coventry, but in 1949 production moved to the MG works at Abingdon. The RM models were marketed as the Riley 1½ Litre and the Riley 2½ Litre.

There were three types of RM vehicles produced. All used Riley engines with four cylinders in-line, hemispherical combustion chambers and twin camshafts mounted high at the sides of the cylinder block.

The RMA was a large saloon, and was replaced by the RME. Both used a 1.5 L (1496 cc) 12 hp (RAC Rating), developed before WWII.

The RMB was a longer car: it was replaced by the RMF. Both cars used a larger engine, new in 1937, a 2.5 L 16 hp (RAC Rating) "Big Four".

The RMC and RMD were limited-production cars, an open 2 or 3-seater Roadster and a 4-seater Drophead.

Kestrel

Riley's 1937-1939 Kestrel body

The RM was inspired by Riley Motors' successful and stylish pre-war 1½ and 2½ Litre Kestrel Saloons but the new cars featured a new chassis. The new chassis with its Riley "torsionic" independent front-wheel suspension incorporated the experience of the wartime years.

The RM series was new because the patterns of dies for the old models were destroyed in the air raids on Coventry.

Riley RMA

Riley RMA
manufactured 1952
Overview
Production	1945–52 10,504 produced.
Body and chassis
Body style	4-door saloon
Powertrain
Engine	1.5 L Straight-4 as for 2½-litre Big Four but bore 69mm by stroke 100mm and bhp 60 @5,300 rpm
Chronology
Predecessor	Riley 12/4 and Riley 12
Successor	Riley RME

The RMA was the first post-war Riley. It was announced in August 1945 with the news it would become available in the autumn. It used the 1.5 L engine and was equipped with hydro-mechanical brakes and an independent suspension using torsion bars in front. The body frame (not to be confused with the chassis) was made of wood in the English tradition, and the car featured traditional styling. The car was capable of reaching 75 mph (121 km/h). The RMA was produced from 1945 until 1952 when it was replaced by the RME.

• 
  Riley RMA 1½-Litre 4-Door Saloon 1949
• 
  Riley RMA 1½-Litre 4-Door Saloon 1952

Riley RMB

Riley RMB
Overview
Production	1946–52 6900 produced
Body and chassis
Body style	4-door saloon
Powertrain
Engine	2.5 L Straight-4
Dimensions
Wheelbase	119 in (3,023 mm)
Length	186 in (4,724 mm)
Width	63.5 in (1,613 mm)
Height	59 in (1,499 mm)
Chronology
Successor	Riley RMF

The 2.5 L (2443 cc) RMB was a lengthened RMA launched a year later in 1946.

It used the 2.5 L (2443 cc) "Big Four" engine with twin SU carburettors, starting with 90 hp (67 kW) but increasing to 100 hp (75 kW) for 1948 with a 95 mph (153 km/h) top speed.

The wheelbase was 6.5 in (165 mm) longer and the overall length was a full 7 in (178 mm) longer. The RMB was replaced by the RMF for 1952.

A car tested by The Motor magazine in 1949 had a top speed of 90 mph (140 km/h) and could accelerate from 0–60 mph (97 km/h) in 16.8 seconds. A fuel consumption of 19.6 miles per imperial gallon (14.4 L/100 km; 16.3 mpg_‑US) was recorded. The test car cost £1224 including taxes.

• 
  Riley RMB 2½-Litre 4-Door Saloon 1949
• 
  Riley RMB 2½-Litre 4-Door Saloon 1950

Riley RMC

Riley RMC
manufactured 1949
Overview
Production	1948–51 507 produced
Body and chassis
Body style	2-door open 2/3-seater
Powertrain
Engine	2.5 L Straight-4

The RMC (Roadster) was an open 2-door, single bench seat, 2/3-seater version of the RMB, with a large rear deck area and fold-flat windscreen. Announced in March 1948 it was delivered to Geneva just too late to be exhibited at the Geneva Motor Show. Primarily designed for the North American export market it was normally fitted with left-hand drive. The gear change lever was on the steering column. The bonnet and radiator were lowered and the bonnet catches were arranged to be operated internally. Extra over-riders were fitted to the bumpers and the fuel tank was enlarged to 20-gallons.

Eighteen months later in September 1949 Riley announced future production would include a small quota of cars with right-hand drive. Riley attributed this to a slight increase in the supply of steel.

Instead of side windows it was supplied with flexible celluloid-glazed side curtains with a hole for hand signals and, when deployed, flimsy synthetic roofing over a light metal frame. It shared that car's 2.5 L 100 hp (75 kW) engine, and could reach 100 mph (160 km/h).

Just over 500 were built from 1948 until 1951.

• 
  1948 in Canada
• 
  1949 in USA

Both the back and front of the car bore a remarkable likeness to a 1934 Ford V8.

Riley RMD

Riley RMD
manufactured 1950
Overview
Production	1949–51 502 produced
Body and chassis
Body style	2-door cabriolet
Powertrain
Engine	2.5 L Straight-4

The RMD (drophead) was a traditional 2-door cabriolet, the last cabriolet to wear the Riley name. It used the same 2.5 L 100 hp (75 kW) engine as the RMB, on which it was based. Just over 500 were produced between 1949 and 1951.

This new body was first displayed in October 1948 at London's Earls Court Motor Show.

dropped cabriolet head A motor car that is a cabriolet has fixed sides to its roof known as cant rails and a folding top that remains part of the vehicle. In a cabriolet like this Riley RMD the tops of the fixed sides, the cant rails, the beams over the side-windows, may be folded along with the top. While the hood is being opened or closed the heavy cant rail beams are supported by exterior hood irons. The hood irons, an elongated S-shape when the roof is up, may be seen at each of the roof's rear quarters. A more English name for a folding cover or canopy of a (horse drawn) vehicle enabling the occupants to be seen clearly is a "head" or for motor vehicles in the mid-20th century drop head.

• 
  Riley RMD 2½-Litre Drophead Coupé 1950
• 
  Riley RMD 2½-Litre Drophead Coupé 1950

Riley RME

Riley RME
first registered July 1953
Overview
Production	1952–55 3446 produced
Body and chassis
Body style	4-door saloon
Powertrain
Engine	1.5 L Straight-4
Chronology
Predecessor	Riley RMA
Successor	Riley One-Point-Five (1957)

Released in 1952, the RME was an improved RMA. It still used the 1.5 L four and featured a fully hydraulic braking system. The body had an enlarged rear window with curved glass. To improve acceleration the rear axle ratio was changed from 4.89:1 to 5.125:1.

When the 2.5 L (2443 cc) car ended production in October 1953 a switch to no running boards was amongst many updates to the RME including wholly new shaped front mudguards.

Produced from 1952, it was discontinued in 1955 and ultimately its place in the range went in 1957 to the much shorter and unrelated, intended but unused, replacement for the Morris Minor — Riley One-Point-Five also sold as Wolseley 1500 and Morris Major.

An RME tested by The Motor magazine in 1952 had a top speed of 75 mph (121 km/h) and could accelerate from 0–60 mph (97 km/h) in 29.5 seconds. A fuel consumption of 24.2 miles per imperial gallon (11.7 L/100 km; 20.2 mpg_‑US) was recorded. The test car cost £1,339 including taxes.

reshaped mudguards all round and no running boards, a 1954 car

• 
  Riley RME 1½-Litre 4-Door Saloon

Riley RMF

Riley RMF
first registered March 1953
Overview
Production	1952–53 1050 produced
Body and chassis
Body style	4-door saloon
Powertrain
Engine	2.5 L Straight-4
Chronology
Predecessor	Riley RMB
Successor	Riley Pathfinder

The RMF replaced the RMB in 1952. It shared that car's 2.5 L "Big Four" engine as well as the mechanical updates from the RME. The RMH Riley Pathfinder, the last automobile to use the Riley "Big Four" engine, and thus considered to be the last "real" Riley by purists, took its place after 1953 and continued in production until 1957.

Riley 2½-litre Big Four engine

Riley 2½-litre Big Four engine
Overview
Manufacturer	Riley Motors Limited
Also called	Riley 16 h.p.
Production	1937 to 1957
Layout
Configuration	straight four
Displacement	2.443 L (149.1 cu in)
Cylinder bore	80.5 mm (3.17 in)
Piston stroke	120 mm (4.7 in)
Cylinder block material	cast iron, aluminium sump, alloy pistons
Cylinder head material	cast iron, hemispherical combustion chambers, spark plugs in centre between valve covers
Valvetrain	90-degree angled overhead valves operated by twin high-lift camshafts moving rockers with short light stiff push-rods powered from the crankshaft by duplex roller chains
Compression ratio	6.9 : 1
Combustion
Fuel system	Twin H4 SU carburettors mechanical petrol pump
Fuel type	petrol
Oil system	pressure fed from sump by submerged gear-type pump driven by skew gear from camshaft
Cooling system	water, thermostatically controlled flow, belt-driven water pump and radiator fan
Output
Power output	106 bhp @ 4,500 rpm Tax rating 16hp
Chronology
Predecessor	none before 1937
Successor	Riley RMH then BMC C-Series engine

Bibliography

• A-Z of Cars 1945–1970. Michael Sedgwick and Mark Gillies. Bayview Books. 1989. ISBN 1-870979-39-7
• Book by James Taylor - RILEY RM-SERIES - ISBN 9780947981365
• Book by John Price Williams - The Legendary RMs - ISBN 9781861267610
• Ramsey, John. The Swapmeet and Toyfair Catalogue of British Diecast Model Toys. Swapmeet Toys and Models Ltd. p. 29. ISBN 095093190X