Pyroxene: Difference between revisions
insufficient citations throughout |
|||
Line 1: | Line 1: | ||
{{short description|A group of inosilicate minerals}} |
{{Uncited-article|date=May 2020}}{{short description|A group of inosilicate minerals}} |
||
[[File:Diopside-172005.jpg|thumb|Pyroxene ([[diopside]]) crystals from [[Afghanistan]]]]The '''pyroxenes''' (commonly abbreviated to ''Px'') are a group of important rock-forming [[Silicate minerals#Inosilicates|inosilicate]] [[mineral]]s found in many [[Igneous rock|igneous]] and [[metamorphic rock|metamorphic]] [[rock (geology)|rocks]]. Pyroxenes have the general formula XY(Si,Al)<sub>2</sub>O<sub>6</sub>, where X represents [[calcium]], [[sodium]], [[iron]] (II) or [[magnesium]] and more rarely [[zinc]], [[manganese]] or [[lithium]], and Y represents ions of smaller size, such as [[chromium]], [[aluminium]], iron (III), magnesium, [[cobalt]], manganese, [[scandium]], [[titanium]], [[vanadium]] or even iron (II). Although aluminium substitutes extensively for silicon in silicates such as [[feldspar]]s and [[amphiboles]]s, the substitution occurs only to a limited extent in most pyroxenes. They share a common structure consisting of single chains of silica [[tetrahedra]]. Pyroxenes that crystallize in the [[monoclinic]] system are known as '''clinopyroxenes''' and those that crystallize in the [[orthorhombic]] system are known as '''orthopyroxenes'''. |
[[File:Diopside-172005.jpg|thumb|Pyroxene ([[diopside]]) crystals from [[Afghanistan]]]]The '''pyroxenes''' (commonly abbreviated to ''Px'') are a group of important rock-forming [[Silicate minerals#Inosilicates|inosilicate]] [[mineral]]s found in many [[Igneous rock|igneous]] and [[metamorphic rock|metamorphic]] [[rock (geology)|rocks]]. Pyroxenes have the general formula XY(Si,Al)<sub>2</sub>O<sub>6</sub>, where X represents [[calcium]], [[sodium]], [[iron]] (II) or [[magnesium]] and more rarely [[zinc]], [[manganese]] or [[lithium]], and Y represents ions of smaller size, such as [[chromium]], [[aluminium]], iron (III), magnesium, [[cobalt]], manganese, [[scandium]], [[titanium]], [[vanadium]] or even iron (II). Although aluminium substitutes extensively for silicon in silicates such as [[feldspar]]s and [[amphiboles]]s, the substitution occurs only to a limited extent in most pyroxenes. They share a common structure consisting of single chains of silica [[tetrahedra]]. Pyroxenes that crystallize in the [[monoclinic]] system are known as '''clinopyroxenes''' and those that crystallize in the [[orthorhombic]] system are known as '''orthopyroxenes'''. |
||
Revision as of 09:09, 31 May 2020
The pyroxenes (commonly abbreviated to Px) are a group of important rock-forming inosilicate minerals found in many igneous and metamorphic rocks. Pyroxenes have the general formula XY(Si,Al)2O6, where X represents calcium, sodium, iron (II) or magnesium and more rarely zinc, manganese or lithium, and Y represents ions of smaller size, such as chromium, aluminium, iron (III), magnesium, cobalt, manganese, scandium, titanium, vanadium or even iron (II). Although aluminium substitutes extensively for silicon in silicates such as feldspars and amphiboless, the substitution occurs only to a limited extent in most pyroxenes. They share a common structure consisting of single chains of silica tetrahedra. Pyroxenes that crystallize in the monoclinic system are known as clinopyroxenes and those that crystallize in the orthorhombic system are known as orthopyroxenes.
The name pyroxene is derived from the Ancient Greek words for fire (πυρ) and stranger (ξένος). Pyroxenes were so named because of their presence in volcanic lavas, where they are sometimes seen as crystals embedded in volcanic glass; it was assumed they were impurities in the glass, hence the name "fire strangers". However, they are simply early-forming minerals that crystallized before the lava erupted.
The upper mantle of Earth is composed mainly of olivine and pyroxene. Pyroxene and feldspar are the major minerals in basalt and gabbro.
Chemistry and nomenclature of the pyroxenes
The chain silicate structure of the pyroxenes offers much flexibility in the incorporation of various cations and the names of the pyroxene minerals are primarily defined by their chemical composition. Pyroxene minerals are named according to the chemical species occupying the X (or M2) site, the Y (or M1) site, and the tetrahedral T site. Cations in Y (M1) site are closely bound to 6 oxygens in octahedral coordination. Cations in the X (M2) site can be coordinated with 6 to 8 oxygen atoms, depending on the cation size. Twenty mineral names are recognised by the International Mineralogical Association's Commission on New Minerals and Mineral Names and 105 previously used names have been discarded (Morimoto et al., 1989).
A typical pyroxene has mostly silicon in the tetrahedral site and predominately ions with a charge of +2 in both the X and Y sites, giving the approximate formula XYT2O6. The names of the common calcium–iron–magnesium pyroxenes are defined in the 'pyroxene quadrilateral'. The enstatite-ferrosilite series ([Mg,Fe]SiO3) includes the common rock-forming mineral Hypersthene, contains up to 5 mol.% calcium and exists in three polymorphs, orthorhombic orthoenstatite and protoenstatite and monoclinic clinoenstatite (and the ferrosilite equivalents). Increasing the calcium content prevents the formation of the orthorhombic phases and pigeonite ([Mg,Fe,Ca][Mg,Fe]Si2O6) only crystallises in the monoclinic system. There is not complete solid solution in calcium content and Mg-Fe-Ca pyroxenes with calcium contents between about 15 and 25 mol.% are not stable with respect to a pair of exolved crystals. This leads to a miscibility gap between pigeonite and augite compositions. There is an arbitrary separation between augite and the diopside-hedenbergite (CaMgSi2O6 – CaFeSi2O6) solid solution. The divide is taken at >45 mol.% Ca. As the calcium ion cannot occupy the Y site, pyroxenes with more than 50 mol.% calcium are not possible. A related mineral wollastonite has the formula of the hypothetical calcium end member but important structural differences mean that it is instead classified as a pyroxenoid.
Magnesium, calcium and iron are by no means the only cations that can occupy the X and Y sites in the pyroxene structure. A second important series of pyroxene minerals are the sodium-rich pyroxenes, corresponding to the 'pyroxene triangle' nomenclature. The inclusion of sodium, which has a charge of +1, into the pyroxene implies the need for a mechanism to make up the "missing" positive charge. In jadeite and aegirine this is added by the inclusion of a +3 cation (aluminium and iron(III) respectively) on the Y site. Sodium pyroxenes with more than 20 mol.% calcium, magnesium or iron(II) components are known as omphacite and aegirine-augite, with 80% or more of these components the pyroxene falls in the quadrilateral.
Table 1 shows the wide range of other cations that can be accommodated in the pyroxene structure, and indicates the sites that they occupy.
T | Si | Al | Fe3+ | ||||||||||||||
Y | Al | Fe3+ | Ti4+ | Cr | V | Ti3+ | Zr | Sc | Zn | Mg | Fe2+ | Mn | |||||
X | Mg | Fe2+ | Mn | Li | Ca | Na |
In assigning ions to sites, the basic rule is to work from left to right in this table, first assigning all silicon to the T site and then filling the site with the remaining aluminium and finally iron(III); extra aluminium or iron can be accommodated in the Y site and bulkier ions on the X site. Not all the resulting mechanisms to achieve charge neutrality follow the sodium example above, and there are several alternative schemes:
- Coupled substitutions of 1+ and 3+ ions on the X and Y sites respectively. For example, Na and Al give the jadeite (NaAlSi2O6) composition.
- Coupled substitution of a 1+ ion on the X site and a mixture of equal numbers of 2+ and 4+ ions on the Y site. This leads to e.g. NaFe2+0.5Ti4+0.5Si2O6.
- The Tschermak substitution where a 3+ ion occupies the Y site and a T site leading to e.g. CaAlAlSiO6.
In nature, more than one substitution may be found in the same mineral.
Pyroxene minerals
- Clinopyroxenes (monoclinic; abbreviated CPx)
- Aegirine, NaFe3+Si2O6
- Augite, (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)2O6
- Clinoenstatite, MgSiO3
- Diopside, CaMgSi2O6
- Esseneite, CaFe3+[AlSiO6]
- Hedenbergite, CaFe2+Si2O6
- Jadeite, Na(Al,Fe3+)Si2O6
- Jervisite, (Na,Ca,Fe2+)(Sc,Mg,Fe2+)Si2O6
- Johannsenite, CaMn2+Si2O6
- Kanoite, Mn2+(Mg,Mn2+)Si2O6
- Kosmochlor, NaCrSi2O6
- Namansilite, NaMn3+Si2O6
- Natalyite, NaV3+Si2O6
- Omphacite, (Ca,Na)(Mg,Fe2+,Al)Si2O6
- Petedunnite, Ca(Zn,Mn2+,Mg,Fe2+)Si2O6
- Pigeonite, (Ca,Mg,Fe)(Mg,Fe)Si2O6
- Spodumene, LiAl(SiO3)2
- Orthopyroxenes (orthorhombic; abbreviated OPx)
- Enstatite, Mg2Si2O6
- Bronzite, intermediate between Enstatite and Hypersthene
- Hypersthene, (Mg,Fe)SiO3
- Eulite, intermediate between Hypersthene and Ferrosilite
- Ferrosilite, Fe2Si2O6
- Donpeacorite, (MgMn)MgSi2O6
- Nchwaningite, Mn2+2SiO3(OH)2•(H2O)
See also
References
- ^ Brown, Dwayne (October 30, 2012). "NASA Rover's First Soil Studies Help Fingerprint Martian Minerals". NASA. Retrieved October 31, 2012.
- C.Michael Hogan. 2010. Calcium. eds. A.Jorgensen, C.Cleveland. Encyclopedia of Earth. National Council for Science and the Environment.
- N. Morimoto, J. Fabries, A. K. Ferguson, I. V. Ginzburg, M. Ross, F. A. Seifeit and J.Zussman. 1989. "Nomenclature of pyroxenes" Canadian Mineralogist, Vol.27, pp. 143–156 https://web.archive.org/web/20080309160117/http://www.mineralogicalassociation.ca/doc/abstracts/ima98/ima98(12).pdf
External links
- Mineral Galleries
- Video Section: Lunar Explorers (link to youtube :: The Lunar Crust)