Jump to content

Bathysphere

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 172.163.147.109 (talk) at 07:03, 23 June 2003 (Build Your Own Bathysphere, By Kyle Grant). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Build Your Own Bathysphere, By Kyle Grant

Skills needed: concrete, and form making This takes alot of precision and skill. Just following the instructions can be a nightmare.

1. Make a sphere inside a sphere out of wood. 2. Let the inner sphere be held in place by small wires stuck in through the wood in each sphere. 3. Make several holes on the outer sphere to pour concrete through. The more hole you make the easier the pouring will be, but will equal to more holes you will have to plug while the concrete is drying. 4. Pour concrete, and plug holes choosing which part of this step to undertake first is up to the individual and his/her taste. 5. Open door and roll to the nearest water mass... you didn't forget to make an air tight door did you?













okyleo@aol.com