Jump to content

4-2-2-0

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by HeyElliott (talk | contribs) at 01:03, 26 April 2023 (MOS:CQ). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Under the Whyte notation for the classification of steam locomotives, 4-2-2-0 represents the wheel arrangement of four leading wheels on two axles, four powered but uncoupled driving wheels on two axles, and no trailing wheels. The arrangement became known as double single.

Usage

Prototype LSWR T7 4-2-2-0

This very unusual wheel arrangement was first used 1893 by Frederick Charles Winby for the locomotive James Toleman, built by Hawthorn Leslie & Company. It was exhibited at the World's Columbian Exposition in Chicago and then delivered to the Milwaukee Road.[1]

Between 1897 and 1901 Dugald Drummond of the London and South Western Railway used this wheel arrangement on two classes of divided drive locomotives, the T7 and E10 classes. The absence of coupling rods enabled the driving wheels to be more widely spaced than on a 4-4-0 locomotive and permitted the inclusion of a larger firebox[2]

Seven locomotives of the type were built which performed adequately, but also displayed disadvantages[example needed] over a 4-4-0 and so the type was not perpetuated.

References

  1. ^ "James Toleman" (in German). Retrieved 2022-05-11.
  2. ^ Bradley, D.L. (1967). Locomotives of the London and South Western Railway, Part 2. Railway Correspondence and Travel Society. p. 77.