Jump to content

Punched card

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Peter Flass (talk | contribs) at 19:24, 6 September 2023 (Typo). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

"Overpunch" redirects here. For the COBOL code, see Signed overpunch.

A 12-row/80-column IBM punched card from the mid-twentieth century

A punched card (also punch card[1] or punched-card[2]) is a piece o of card stock that stores digital data using punched holes. Punched cards were once common in data processing and the control of automated machines.

Punched cards were widely used in the 20th century, where unit record machines, organized into data processing systems, used punched cards for data input, output, and storage.[3][4] The IBM 12-row/80-column punched card format came to dominate the industry. Many early digital computers used punched cards as the primary medium for input of both computer programs and data.

While punched cards are now obsolete as a storage medium, as of 2012, some voting machines still used punched cards to record votes.[5] Punched cards also had a significant cultural impact in the 20th century.

Close-up of a Jacquard loom's chain, constructed using 8 × 26 hole punched cards

History

The idea of control and data storage via punched holes was developed independently on several occasions in the modern period. In most cases there is no evidence that each of the inventors was aware of the earlier work.

Precursors

Carpet loom with Jacquard apparatus by Carl Engel, around 1860. Chain feed is on the left.

Basile Bouchon developed the control of a loom by punched holes in paper tape in 1725. The design was improved by his assistant Jean-Baptiste Falcon and by Jacques Vaucanson.[6] Although these improvements controlled the patterns woven, they still required an assistant to operate the mechanism.

In 1804 Joseph Marie Jacquard demonstrated a mechanism to automate loom operation. A number of punched cards were linked into a chain of any length. Each card held the instructions for shedding (raising and lowering the warp) and selecting the shuttle for a single pass.[7]

Semyon Korsakov was reputedly the first to propose punched cards in informatics for information store and search. Korsakov announced his new method and machines in September 1832.[8]

Charles Babbage proposed the use of "Number Cards", "pierced with certain holes and stand[ing] opposite levers connected with a set of figure wheels ... advanced they push in those levers opposite to which there are no holes on the cards and thus transfer that number together with its sign" in his description of the Calculating Engine's Store.[9] There is no evidence that he built a practical example.

In 1881 Jules Carpentier developed a method of recording and playing back performances on a harmonium using punched cards. The system was called the Mélographe Répétiteur and "writes down ordinary music played on the keyboard dans le langage de Jacquard",[10] that is as holes punched in a series of cards. By 1887 Carpentier had separated the mechanism into the Melograph which recorded the player's key presses and the Melotrope which played the music.[11][12]

20th century

At the end of the 1800s Herman Hollerith invented the recording of data on a medium that could then be read by a machine,[dubious – discuss][13][14][15][16] developing punched card data processing technology for the 1890 U.S. census.[17] His tabulating machines read and summarized data stored on punched cards and they began use for government and commercial data processing.

Initially, these electromechanical machines only counted holes, but by the 1920s they had units for carrying out basic arithmetic operations.[18]: 124  Hollerith founded the Tabulating Machine Company (1896) which was one of four companies that were amalgamated via stock acquisition to form a fifth company, Computing-Tabulating-Recording Company (CTR) (1911), later renamed International Business Machines Corporation (IBM) (1924). Other companies entering the punched card business included The Tabulator Limited (Britain, 1902), Deutsche Hollerith-Maschinen Gesellschaft mbH (Dehomag) (Germany, 1911), Powers Accounting Machine Company (US, 1911), Remington Rand (US, 1927), and H.W. Egli Bull (France, 1931).[19] These companies, and others, manufactured and marketed a variety of punched cards and unit record machines for creating, sorting, and tabulating punched cards, even after the development of electronic computers in the 1950s.

Woman operating the card puncher, c.1940

Both IBM and Remington Rand tied punched card purchases to machine leases, a violation of the US 1914 Clayton Antitrust Act. In 1932, the US government took both to court on this issue. Remington Rand settled quickly. IBM viewed its business as providing a service and that the cards were part of the machine. IBM fought all the way to the Supreme Court and lost in 1936; the court ruled that IBM could only set card specifications.[20][21]: 300–301 

"By 1937... IBM had 32 presses at work in Endicott, N.Y., printing, cutting and stacking five to 10 million punched cards every day."[22] Punched cards were even used as legal documents, such as U.S. Government checks[23] and savings bonds.[24]

During World War II punched card equipment was used by the Allies in some of their efforts to decrypt Axis communications. See, for example, Central Bureau in Australia. At Bletchley Park in England, "some 2 million punched cards a week were being produced, indicating the sheer scale of this part of the operation".[25] In Nazi Germany, punched cards were used for the censuses of various regions and other purposes[26][27] (see IBM and the Holocaust).

Clerk creating punch cards containing data from the 1950 United States census.

Punched card technology developed into a powerful tool for business data-processing. By 1950 punched cards had become ubiquitous in industry and government. "Do not fold, spindle or mutilate," a warning that appeared on some punched cards distributed as documents such as checks and utility bills to be returned for processing, became a motto for the post-World War II era.[28][29]

In 1956[30] IBM signed a consent decree requiring, amongst other things, that IBM would by 1962 have no more than one-half of the punched card manufacturing capacity in the United States. Tom Watson Jr.'s decision to sign this decree, where IBM saw the punched card provisions as the most significant point, completed the transfer of power to him from Thomas Watson, Sr.[21]

The Univac UNITYPER introduced magnetic tape for data entry in the 1950s. During the 1960s, the punched card was gradually replaced as the primary means for data storage by magnetic tape, as better, more capable computers became available. Mohawk Data Sciences introduced a magnetic tape encoder in 1965, a system marketed as a keypunch replacement which was somewhat successful. Punched cards were still commonly used for entering both data and computer programs until the mid-1980s when the combination of lower cost magnetic disk storage, and affordable interactive terminals on less expensive minicomputers made punched cards obsolete for these roles as well.[31]: 151  However, their influence lives on through many standard conventions and file formats. The terminals that replaced the punched cards, the IBM 3270 for example, displayed 80 columns of text in text mode, for compatibility with existing software. Some programs still operate on the convention of 80 text columns, although fewer and fewer do as newer systems employ graphical user interfaces with variable-width type fonts.

Nomenclature

A deck of punched cards comprising a computer program. The red diagonal line is a visual aid to keep the deck sorted.[32]

The terms punched card, punch card, and punchcard were all commonly used, as were IBM card and Hollerith card (after Herman Hollerith).[1] IBM used "IBM card" or, later, "punched card" at first mention in its documentation and thereafter simply "card" or "cards".[33][34] Specific formats were often indicated by the number of character positions available, e.g. 80-column card. A sequence of cards that is input to or output from some step in an application's processing is called a card deck or simply deck. The rectangular, round, or oval bits of paper punched out were called chad (chads) or chips (in IBM usage). Sequential card columns allocated for a specific use, such as names, addresses, multi-digit numbers, etc., are known as a field. The first card of a group of cards, containing fixed or indicative information for that group, is known as a master card. Cards that are not master cards are detail cards.

Formats

The Hollerith punched cards used for the 1890 U.S. census were blank.[35] Following that, cards commonly had printing such that the row and column position of a hole could be easily seen. Printing could include having fields named and marked by vertical lines, logos, and more.[36] "General purpose" layouts (see, for example, the IBM 5081 below) were also available. For applications requiring master cards to be separated from following detail cards, the respective cards had different upper corner diagonal cuts and thus could be separated by a sorter.[37] Other cards typically had one upper corner diagonal cut so that cards not oriented correctly, or cards with different corner cuts, could be identified.

Hollerith's early cards

Hollerith card as shown in the Railroad Gazette in 1895, with 12 rows and 24 columns.[38]

Herman Hollerith was awarded three patents[39] in 1889 for electromechanical tabulating machines. These patents described both paper tape and rectangular cards as possible recording media. The card shown in U.S. patent 395,781 of January 8 was printed with a template and had hole positions arranged close to the edges so they could be reached by a railroad conductor's ticket punch, with the center reserved for written descriptions. Hollerith was originally inspired by railroad tickets that let the conductor encode a rough description of the passenger:

I was traveling in the West and I had a ticket with what I think was called a punch photograph...the conductor...punched out a description of the individual, as light hair, dark eyes, large nose, etc. So you see, I only made a punch photograph of each person.[18]: 15 

When use of the ticket punch proved tiring and error-prone, Hollerith developed the pantograph "keyboard punch". It featured an enlarged diagram of the card, indicating the positions of the holes to be punched. A printed reading board could be placed under a card that was to be read manually.[35]: 43 

Hollerith envisioned a number of card sizes. In an article he wrote describing his proposed system for tabulating the 1890 U.S. census, Hollerith suggested a card 3 by 5+1⁄2 inches (7.6 by 14.0 cm) of Manila stock "would be sufficient to answer all ordinary purposes."[40] The cards used in the 1890 census had round holes, 12 rows and 24 columns. A reading board for these cards can be seen at the Columbia University Computing History site.[41] At some point, 3+1⁄4 by 7+3⁄8 inches (83 by 187 mm) became the standard card size. These are the dimensions of the then-current paper currency of 1862–1923.[42]

Hollerith's original system used an ad hoc coding system for each application, with groups of holes assigned specific meanings, e.g. sex or marital status. His tabulating machine had up to 40 counters, each with a dial divided into 100 divisions, with two indicator hands; one which stepped one unit with each counting pulse, the other which advanced one unit every time the other dial made a complete revolution. This arrangement allowed a count up to 9,999. During a given tabulating run counters were assigned specific holes or, using relay logic, combination of holes.[40]

Later designs led to a card with ten rows, each row assigned a digit value, 0 through 9, and 45 columns.[43] This card provided for fields to record multi-digit numbers that tabulators could sum, instead of their simply counting cards. Hollerith's 45 column punched cards are illustrated in Comrie's The application of the Hollerith Tabulating Machine to Brown's Tables of the Moon.[44]

IBM 80-column format and character codes

Punched card from a Fortran program: Z(1) = Y + W(1), plus sorting information in the last 8 columns.

By the late 1920s, customers wanted to store more data on each punched card. Thomas J. Watson Sr., IBM's head, asked two of his top inventors, Clair D. Lake and J. Royden Pierce, to independently develop ways to increase data capacity without increasing the size of the punched card. Pierce wanted to keep round holes and 45 columns but to allow each column to store more data, Lake suggested rectangular holes, which could be spaced more tightly, allowing 80 columns per punched card, thereby nearly doubling the capacity of the older format.[45] Watson picked the latter solution, introduced as The IBM Card, in part because it was compatible with existing tabulator designs and in part because it could be protected by patents and give the company a distinctive advantage.[46]

This IBM card format, introduced in 1928,[47] has rectangular holes, 80 columns, and 10 rows.[48] Card size is 7+3⁄8 by 3+1⁄4 inches (187 by 83 mm). The cards are made of smooth stock, 0.007 inches (180 μm) thick. There are about 143 cards to the inch (56/cm). In 1964, IBM changed from square to round corners.[49] They come typically in boxes of 2000 cards[50] or as continuous form cards. Continuous form cards could be both pre-numbered and pre-punched for document control (checks, for example).[51]

Initially designed to record responses to yes–no questions, support for numeric, alphabetic and special characters was added through the use of columns and zones. The top three positions of a column are called zone punching positions, 12 (top), 11, and 0 (0 may be either a zone punch or a digit punch).[52] For decimal data the lower ten positions are called digit punching positions, 0 (top) through 9.[52] An arithmetic sign can be specified for a decimal field by overpunching the field's rightmost column with a zone punch: 12 for plus, 11 for minus (CR). For Pound sterling pre-decimalization currency a penny column represents the values zero through eleven; 10 (top), 11, then 0 through 9 as above. An arithmetic sign can be punched in the adjacent shilling column.[53]: 9  Zone punches had other uses in processing, such as indicating a master card.[54]

An 80-column punched card with the extended character set introduced with EBCDIC in 1964.

Diagram:[55] Note: The 11 and 12 zones were also called the X and Y zones, respectively. 

    _______________________________________________
   / &-0123456789ABCDEFGHIJKLMNOPQR/STUVWXYZ
12|  x           xxxxxxxxx
11|   x                   xxxxxxxxx
 0|    x                           xxxxxxxxx
 1|     x        x        x        x
 2|      x        x        x        x
 3|       x        x        x        x
 4|        x        x        x        x
 5|         x        x        x        x
 6|          x        x        x        x
 7|           x        x        x        x
 8|            x        x        x        x
 9|             x        x        x        x
  |________________________________________________

In 1931, IBM began introducing upper-case letters and special characters (Powers-Samas had developed the first commercial alphabetic punched card representation in 1921).[56][57][nb 1] The 26 letters have two punches (zone [12,11,0] + digit [1–9]). The languages of Germany, Sweden, Denmark, Norway, Spain, Portugal and Finland require up to three additional letters; their punching is not shown here.[58]: 88–90  Most special characters have two or three punches (zone [12,11,0, or none] + digit [2–7] + 8); a few special characters were exceptions: "&" is 12 only, "-" is 11 only, and "/" is 0 + 1). The Space character has no punches.[58]: 38  The information represented in a column by a combination of zones [12, 11, 0] and digits [0–9] is dependent on the use of that column. For example, the combination "12-1" is the letter "A" in an alphabetic column, a plus signed digit "1" in a signed numeric column, or an unsigned digit "1" in a column where the "12" has some other use. The introduction of EBCDIC in 1964 defined columns with as many as six punches (zones [12,11,0,8,9] + digit [1–7]). IBM and other manufacturers used many different 80-column card character encodings.[59][60] A 1969 American National Standard defined the punches for 128 characters and was named the Hollerith Punched Card Code (often referred to simply as Hollerith Card Code), honoring Hollerith.[58]: 7 

Binary punched card.

For some computer applications, binary formats were used, where each hole represented a single binary digit (or "bit"), every column (or row) is treated as a simple bit field, and every combination of holes is permitted.

For example, on the IBM 701[61] and IBM 704,[62] card data was read, using an IBM 711, into memory in row binary format. For each of the twelve rows of the card, 72 of the 80 columns would be read into two 36-bit words; a control panel was used to select the 72 columns to be read. Software would translate this data into the desired form. One convention was to use columns 1 through 72 for data, and columns 73 through 80 to sequentially number the cards, as shown in the picture above of a punched card for FORTRAN. Such numbered cards could be sorted by machine so that if a deck was dropped the sorting machine could be used to arrange it back in order. This convention continued to be used in FORTRAN, even in later systems where the data in all 80 columns could be read.

As an aid to humans who had to deal with the punched cards, the IBM 026 and later 029 and 129 key punch machines could print human-readable text above each of the 80 columns.

Invalid "lace cards" such as this pose mechanical problems for card readers.

As a prank, punched cards could be made where every possible punch position had a hole. Such "lace cards" lacked structural strength, and would frequently buckle and jam inside the machine.[63]

The IBM 80-column punched card format dominated the industry, becoming known as just IBM cards, even though other companies made cards and equipment to process them.[64]

A 5081 card from a non-IBM manufacturer.

One of the most common punched card formats is the IBM 5081 card format, a general purpose layout with no field divisions. This format has digits printed on it corresponding to the punch positions of the digits in each of the 80 columns. Other punched card vendors manufactured cards with this same layout and number.

IBM Stub card and Short card formats

Long cards were available with a scored stub on either end which, when torn off, left an 80 column card. The torn off card is called a stub card.

80-column cards were available scored, on either end, creating both a short card and a stub card when torn apart. Short cards can be processed by other IBM machines.[51][65] A common length for stub cards was 51 columns. Stub cards were used in applications requiring tags, labels, or carbon copies.[51]

IBM 40-column Port-A-Punch card format

According to the IBM Archive: IBM's Supplies Division introduced the Port-A-Punch in 1958 as a fast, accurate means of manually punching holes in specially scored IBM punched cards. Designed to fit in the pocket, Port-A-Punch made it possible to create punched card documents anywhere. The product was intended for "on-the-spot" recording operations—such as physical inventories, job tickets and statistical surveys—because it eliminated the need for preliminary writing or typing of source documents.[66]

  • IBM Port-A-Punch
    IBM Port-A-Punch
  • FORTRAN Port-A-Punch card. Compiler directive "SQUEEZE" removed the alternating blank columns from the input.
    FORTRAN Port-A-Punch card. Compiler directive "SQUEEZE" removed the alternating blank columns from the input.
  • Port-a-punch
    Port-a-punch

IBM 96-column format

IBM 96-column punched card

In 1969 IBM introduced a new, smaller, round-hole, 96-column card format along with the IBM System/3 low-end business computer. These cards have tiny, 1 mm diameter circular holes, smaller than those in paper tape. Data are stored in 6-bit BCD, with three rows of 32 characters each, or 8-bit EBCDIC. In this format, each column of the top tiers are combined with two punch rows from the bottom tier to form an 8-bit byte, and the middle tier is combined with two more punch rows, so that each card contains 64 bytes of 8-bit-per-byte binary coded data.[67] As in the 80 column card, readable text was printed in the top section of the card. There was also a 4th row of 32 characters that could be printed. This format was never widely used; it was IBM-only, but they did not support it on any equipment beyond the System/3, where it was quickly superseded by the 1973 IBM 3740 Data Entry System using 8-inch floppy disks.

Powers/Remington Rand/UNIVAC 90-column format

A blank Remington Rand UNIVAC format card. Card courtesy of MIT Museum.
A punched Remington Rand card with an IBM card for comparison

The Powers/Remington Rand card format was initially the same as Hollerith's; 45 columns and round holes. In 1930, Remington Rand leap-frogged IBM's 80 column format from 1928 by coding two characters in each of the 45 columns – producing what is now commonly called the 90-column card.[31]: 142  There are two sets of six rows across each card. The rows in each set are labeled 0, 1/2, 3/4, 5/6, 7/8 and 9. The even numbers in a pair are formed by combining that punch with a 9 punch. Alphabetic and special characters use 3 or more punches.[68][69]

Powers-Samas formats

The British Powers-Samas company used a variety of card formats for their unit record equipment. They began with 45 columns and round holes. Later 36, 40 and 65 column cards were provided. A 130 column card was also available – formed by dividing the card into two rows, each row with 65 columns and each character space with 5 punch positions. A 21 column card was comparable to the IBM Stub card.[53]: 47–51 

Mark sense format

HP Educational Basic optical mark-reader card.

Mark sense (electrographic) cards, developed by Reynold B. Johnson at IBM,[70] have printed ovals that could be marked with a special electrographic pencil. Cards would typically be punched with some initial information, such as the name and location of an inventory item. Information to be added, such as quantity of the item on hand, would be marked in the ovals. Card punches with an option to detect mark sense cards could then punch the corresponding information into the card.

Aperture format

Aperture card

Aperture cards have a cut-out hole on the right side of the punched card. A piece of 35 mm microfilm containing a microform image is mounted in the hole. Aperture cards are used for engineering drawings from all engineering disciplines. Information about the drawing, for example the drawing number, is typically punched and printed on the remainder of the card.

Manufacturing

Institutions, such as universities, often had their general purpose cards printed with a logo. A wide variety of forms and documents were printed on punched cards, including checks. Such printing did not interfere with the operation of the machinery.
A punched card printing plate.

IBM's Fred M. Carroll[71] developed a series of rotary presses that were used to produce punched cards, including a 1921 model that operated at 460 cards per minute (cpm). In 1936 he introduced a completely different press that operated at 850 cpm.[22][72] Carroll's high-speed press, containing a printing cylinder, revolutionized the company's manufacturing of punched cards.[73] It is estimated that between 1930 and 1950, the Carroll press accounted for as much as 25 percent of the company's profits.[21]

Discarded printing plates from these card presses, each printing plate the size of an IBM card and formed into a cylinder, often found use as desk pen/pencil holders, and even today are collectible IBM artifacts (every card layout[74] had its own printing plate).

In the mid-1930s a box of 1,000 cards cost $1.05 (equivalent to $23 in 2023).[75]

Cultural impact

A $75 U.S. Savings Bond, Series EE issued as a punched card. Eight of the holes record the bond serial number.
Cartons of punched cards stored in a United States National Archives Records Service facility in 1959. Each carton could hold 2,000 cards.

While punched cards have not been widely used for generations, the impact was so great for most of the 20th century that they still appear from time to time in popular culture. For example:

  • Accommodation of people's names: The Man Whose Name Wouldn't Fit[76][77]
  • Artist and architect Maya Lin in 2004 designed a public art installation at Ohio University, titled "Input", that looks like a punched card from the air.[78]
  • Tucker Hall at the University of Missouri – Columbia features architecture that is rumored to be influenced by punched cards. Although there are only two rows of windows on the building, a rumor holds that their spacing and pattern will spell out "M-I-Z beat k-U!" on a punched card, making reference to the university and state's rivalry with neighboring state Kansas.[79]
  • At the University of Wisconsin – Madison, the exterior windows of the Engineering Research Building[80] were modeled after a punched card layout, during its construction in 1966.
  • At the University of North Dakota in Grand Forks, a portion of the exterior of Gamble Hall (College of Business and Public Administration), has a series of light-colored bricks that resembles a punched card spelling out "University of North Dakota."[81]
  • In the 1964–1965 Free Speech Movement, punched cards became a

metaphor... symbol of the "system"—first the registration system and then bureaucratic systems more generally ... a symbol of alienation ... Punched cards were the symbol of information machines, and so they became the symbolic point of attack. Punched cards, used for class registration, were first and foremost a symbol of uniformity. .... A student might feel "he is one of out of 27,500 IBM cards" ... The president of the Undergraduate Association criticized the University as "a machine ... IBM pattern of education."... Robert Blaumer explicated the symbolism: he referred to the "sense of impersonality... symbolized by the IBM technology."...

— Steven Lubar[28]
  • A legacy of the 80 column punched card format is that a display of 80 characters per row was a common choice in the design of character-based terminals.[82][83] As of September 2014, some character interface defaults, such as the command prompt window's width in Microsoft Windows, remain set at 80 columns and some file formats, such as FITS, still use 80-character card images.
  • In Arthur C. Clarke's early short story "Rescue Party", the alien explorers find a "... wonderful battery of almost human Hollerith analyzers and the five thousand million punched cards holding all that could be recorded on each man, woman and child on the planet".[84] Writing in 1946, Clarke, like almost all SF authors, had not then foreseen the development and eventual ubiquity of the computer.
  • In "I.B.M.", the final track of her album This Is a Recording, comedian Lily Tomlin gives instructions that, if followed, would purportedly shrink the holes on a punch card (used by AT&T at the time for customer billing), making it unreadable.

Do Not Fold, Spindle or Mutilate

A common example of the requests often printed on punched cards which were to be individually handled, especially those intended for the public to use and return is "Do Not Fold, Spindle or Mutilate" (in the UK "Do not bend, spike, fold or mutilate").[28]: 43–55  Coined by Charles A. Phillips,[85] it became a motto[86] for the post–World War II era (even though many people had no idea what spindle meant), and was widely mocked and satirized. Some 1960s students at Berkeley wore buttons saying: "Do not fold, spindle or mutilate. I am a student".[87] The motto was also used for a 1970 book by Doris Miles Disney[88] with a plot based around an early computer dating service and a 1971 made-for-TV movie based on that book, and a similarly titled 1967 Canadian short film, Do Not Fold, Staple, Spindle or Mutilate.

Standards

A U.S. Census Bureau clerk (left) prepares punch cards using a pantograph similar to that developed by Herman Hollerith for the 1890 Census, while a second clerk (right) uses a 1930s key punch to perform the same task more quickly.
A wall-sized display sample of a punch card for the 1954 U.S. Census of Agriculture
  • ANSI INCITS 21-1967 (R2002), Rectangular Holes in Twelve-Row Punched Cards (formerly ANSI X3.21-1967 (R1997)) Specifies the size and location of rectangular holes in twelve-row 3+1⁄4-inch-wide (83 mm) punched cards.
  • ANSI X3.11-1990 American National Standard Specifications for General Purpose Paper Cards for Information Processing
  • ANSI X3.26-1980 (R1991) Hollerith Punched Card Code
  • ISO 1681:1973 Information processing – Unpunched paper cards – Specification
  • ISO 6586:1980 Data processing – Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards. Defines ISO 7-bit and 8-bit character sets on punched cards as well as the representation of 7-bit and 8-bit combinations on 12-row punched cards. Derived from, and compatible with, the Hollerith Code, ensuring compatibility with existing punched card files.

Punched card devices

Processing of punched cards was handled by a variety of machines, including:

See also

Notes

  1. ^ Special characters are non-alphabetic, non-numeric, such as "&#,$.-/@%*?"

References

  1. ^ a b Pinker, Steven Arthur (2007). The Stuff of Thought. Viking. p. 362. (NB. Notes the loss of -ed in pronunciation as it did in ice cream, mincemeat, and box set, formerly iced cream, minced meat, and boxed set.)
  2. ^ "Know-How" Makes Them Great. Tabulating Machines Division, Remington Rand Inc. 1941.
  3. ^ Cortada, James W. [at Wikidata] (1993). Before The Computer: IBM, NCR, Burroughs, & Remington Rand & The Industry They Created, 1865–1965. Princeton University Press. ISBN 978-0-691-63008-3.
  4. ^ Brooks, Frederick Phillips; Iverson, Kenneth Eugene (1963). Automatic Data Processing. Wiley. p. 94. semiautomatic
  5. ^ "Nightly News Aired on 2012-12-27 – Punch card voting lingers". NBC News.
  6. ^ Razy, Claudius (1913). Étude analytique des petits modèles de métiers exposés au musée des tissus [Analytical study of small loom models exhibited at the museum of fabrics] (in French). Lyon, France: Musée Historique des Tissus. p. 120.
  7. ^ Essinger, James (2007-03-29). Jacquard's Web: How a Hand-loom Led to the Birth of the Information Age. OUP Oxford. pp. 35–40. ISBN 978-0-19280578-2.
  8. ^ "1801: Punched cards control Jacquard loom". computerhistory.org. Retrieved 2019-01-07.
  9. ^ Babbage, Charles (1837-12-26). "On the Mathematical Powers of the Calculating Engine". The Origins of Digital Computers. pp. 19–54. doi:10.1007/978-3-642-61812-3_2. ISBN 978-3-642-61814-7.
  10. ^ Southgate, Thomas Lea (1881). "On Various Attempts That Have Been Made to Record Extemporaneous Playing". Journal of the Royal Musical Association. 8 (1): 189–196. doi:10.1093/jrma/8.1.189.
  11. ^ Seaver, Nicholas Patrick (June 2010). A Brief History of Re-performance (PDF) (Thesis). Massachusetts Institute of Technology. p. 34. Retrieved 2017-06-21.
  12. ^ "The Reproducing Piano – Early Experiments". www.pianola.com. The Pianola Institute. 2016. Retrieved 2017-06-25. At this early stage, the corresponding playback mechanism, the Mélotrope, was permanently installed inside the same harmonium used for the recording process, but by 1887 Carpentier had modified both devices, restricting the range to three octaves, allowing for the Mélotrope to be attached to any style of keyboard instrument, and designing and constructing an automatic perforating machine for mass production.
  13. ^ Hollerith, H. (April 1889). "An Electric Tabulating System". The Quarterly. X (16). School of Mines, Columbia University: 238–255.
  14. ^ Randell, Brian, ed. (1982). The Origins of Digital Computers, Selected Papers (3rd ed.). Springer-Verlag. ISBN 0-387-11319-3.
  15. ^ US patent 395782, Hollerith, Herman, "Art of compiling statistics", issued 1889-01-08 
  16. ^ "Art of compiling statistics". Retrieved 2020-05-22.
  17. ^ da Cruz, Frank (2019-08-28). "Herman Hollerith". Columbia University Computing History. Columbia University. Retrieved 2020-03-09. After some initial trials with paper tape, he settled on punched cards...
  18. ^ a b Austrian, Geoffrey D. (1982). Herman Hollerith: The Forgotten Giant of Information Processing. Columbia University Press. pp. 15, 124, 418–. ISBN 978-0-231-05146-0.
  19. ^ A History of Sperry Rand Corporation (4th ed.). Sperry Rand. 1967. p. 32.
  20. ^ "International Business Machines Corp. v. United States, 298 U.S. 131". Justia. 1936.
  21. ^ a b c Belden, Thomas; Belden, Marva (1962). The Lengthening Shadow: The Life of Thomas J. Watson. Little, Brown & Company. pp. 300–301.
  22. ^ a b "IBM Archive: Endicott card manufacturing". IBM. 2003-01-23. Retrieved 2013-10-05.
  23. ^ Lubar, Steven (1993). InfoCulture: The Smithsonian Book of Information Age Inventions. Houghton Mifflin. p. 302. ISBN 978-0-395-57042-5.
  24. ^ "Supplies Division history". IBM. 2003-01-23. 1962: 20th year […] producing savings bonds […] 1964: $75 savings bond […] produce
  25. ^ Block, H. "Wartime Building History". Codes and Ciphers Heritage Trust.
  26. ^ Luebke, David Martin [at Wikidata]; Milton, Sybil Halpern [in German] (Autumn 1994). "Locating the victim: An overview of census-taking, tabulation technology and persecution in Nazi Germany". IEEE Annals of the History of Computing. 16 (3). IEEE: 25–. doi:10.1109/MAHC.1994.298418. S2CID 16010272.
  27. ^ Black, Edwin (2009) [2001]. IBM and the Holocaust: The Strategic Alliance Between Nazi Germany and America's Most Powerful Corporation (Second ed.). Washington, DC, USA: Dialog Press. OCLC 958727212.
  28. ^ a b c Lubar, Steven (Winter 1992). "Do Not Fold, Spindle Or Mutilate: A Cultural History Of The Punch Card" (PDF). Journal of American Culture. 15 (4): 43–55. doi:10.1111/j.1542-734X.1992.1504_43.x. Archived from the original (PDF) on 2012-10-02. Retrieved 2011-06-11. pp. 43–55: Security checks issued starting in 1936 […] (13 pages); Lubar, Steven (May 1991). "Do not fold, spindle or mutilate: A cultural history of the punch card". Smithsonian Institution. Archived from the original on 2006-08-30. (NB. An earlier version of this paper was presented to the Bureau of the Census's Hollerith Machine Centennial Celebration on 1990-06-20.)
  29. ^ Jones, Douglas W. "Punched Cards - A brief illustrated technical history". Retrieved 2023-01-21.
  30. ^ "Justice Department agrees to terminate last provisions of IBM consent decree in stages ending 5 years from today" (Press release). Justice Department. 1996-07-02. Retrieved 2021-10-04.
  31. ^ a b Aspray, William [in German], ed. (1990). Computing before Computers. Iowa State University Press. pp. 142, 151. ISBN 978-0-8138-0047-9.
  32. ^ "Punched Cards". miami.edu. University of Miami. Retrieved 2021-12-06. Once the cards were assembled in order in a deck, the programmer would usually draw a long diagonal line across the top edges of the cards, so that if ever one got out of order it would easily be noticed
  33. ^ IBM 519 Principles of Operation. IBM. 1946. Form 22-3292-5. An important function in IBM Accounting is the automatic preparation of IBM cards.
  34. ^ Reference Manual 1401 Data Processing System (PDF). IBM. April 1962. p. 10. A24-1403-5. The IBM 1402 Card Read-Punch provides the system with simultaneous punched-card input and output. This unit has two card feeds.
  35. ^ a b Truesdell, Leon E. (1965). The Development of Punch Card Tabulation in the Bureau of the Census 1890–1940. US GPO. p. 43. Includes extensive, detailed, description of Hollerith's first machines and their use for the 1890 census.
  36. ^ The Design of IBM Cards (PDF). IBM. 1956. 22-5526-4.
  37. ^ Reference Manual – IBM 82, 83, and 84 Sorters (PDF). IBM. July 1962. p. 25. A24-1034.
  38. ^ "Hollerith's Electric Tabulating Machine". Railroad Gazette. 1895-04-19. Archived from the original on 2015-03-20. Retrieved 2015-06-04 – via Library of Congress.
  39. ^ U.S. patent 395,781, U.S. patent 395,782, U.S. patent 395,783
  40. ^ a b Hollerith, Herman (April 1889). da Cruz, Frank (ed.). "An Electric Tabulating System". The Quarterly. 10 (16). School of Mines, Columbia University: 245.
  41. ^ da Cruz, Frank (2019-12-26). "Hollerith 1890 Census Tabulator". Columbia University Computing History. Columbia University. Retrieved 2020-03-09.
  42. ^ "Large-Size U.S. Paper Money". Littleton Coin Company. Retrieved 2017-03-16.
  43. ^ Bashe, Charles J.; Johnson, Lyle R.; Palmer, John H.; Pugh, Emerson W. (1986). IBM's Early Computers. Cambridge, Massachusetts, USA: The MIT Press. p. 5. ISBN 978-0-262-02225-5. (NB. Also see pages 5–14 for additional information on punched cards.)
  44. ^ Comrie, Leslie John (1932). "The application of the Hollerith tabulating machine to Brown's tables of the moon". Monthly Notices of the Royal Astronomical Society. 92 (7): 694–707. Bibcode:1932MNRAS..92..694C. doi:10.1093/mnras/92.7.694.
  45. ^ U.S. Patent 1,772,492, Record Sheet for Tabulating Machines, C. D. Lake, filed 1928-06-20
  46. ^ "The IBM Punched Card". IBM. 2012-03-07. Retrieved 2014-04-25.
  47. ^ IBM Archive: 1928.
  48. ^ Pugh – Building IBM – page 49.
  49. ^ IBM Archive: Old/New-Cards.
  50. ^ p. 405, "How Computational Chemistry Became Important in the Pharmaceutical Industry", Donald B. Boyd, chapter 7 in Reviews in Computational Chemistry, Volume 23, edited by Kenny B. Lipkowitz, Thomas R. Cundari and Donald B. Boyd, Wiley & Son, 2007, ISBN 978-0-470-08201-0.
  51. ^ a b c Principles of IBM Accounting. IBM. 1953. 224-5527-2.
  52. ^ a b Punched card Data Processing Principles. IBM. 1961. p. 3.
  53. ^ a b Cemach, Harry P. (1951). The Elements of Punched Card Accounting. Sir Isaac Pitman & Sons Ltd. pp. 9, 47–51, 137–. Machine illustrations were provided by Power-Samas Accounting Machines and British Tabulating Machine Co.
  54. ^ IBM Operator's Guide (PDF). IBM. July 1959. p. 141. A24-1010. Master Card: The first card of a group containing fixed or indicative information for that group
  55. ^ "Punched Card Codes". Cs.uiowa.edu. Retrieved 2013-10-05.
  56. ^ Rojas, Raúl, ed. (2001). Encyclopedia of Computers and Computer History. Fitzroy Dearborn. p. 656.
  57. ^ Pugh, Emerson W. (1995). Building IBM: Shaping and Industry and Its Technology. MIT Press. pp. 50–51. ISBN 978-0-262-16147-3.
  58. ^ a b c Mackenzie, Charles E. (1980). Coded Character Sets, History and Development (PDF). The Systems Programming Series (1 ed.). Addison-Wesley Publishing Company, Inc. pp. 7, 38, 88–90. ISBN 978-0-201-14460-4. LCCN 77-90165. Archived (PDF) from the original on 2016-05-26. Retrieved 2020-05-12.
  59. ^ Winter, Dik T. "80-column Punched Card Codes". Archived from the original on 2007-04-08. Retrieved 2012-11-06.
  60. ^ Jones, Douglas W. "Punched Card Codes". Retrieved 2007-02-20.
  61. ^ Principles of Operation, Type 701 and Associated Equipment (PDF). IBM. 1953. pp. 34–36. 24-6042-1.
  62. ^ 704 Electronic Data Processing Machine Manual of Operation (PDF). IBM. 1955. pp. 39–50. 24-6661-2.
  63. ^ Raymond, Eric S., ed. (1991). The New Hacker's Dictionary. Cambridge, Massachusetts, USA: MIT Press. p. 219.
  64. ^ Maxfield, Clive "Max" (2011-10-13). "How it was: Paper tapes and punched cards". EE Times. Retrieved 2022-07-05.
  65. ^ IBM 24 Card Punch, IBM 26 Printing Card Punch Reference Manual (PDF). October 1965. p. 26. A24-0520-3. The variable-length card feed feature on the 24 or 26 allows the processing of 51-, 60-, 66-, and 80-column cards (Figure 20)
  66. ^ "IBM Archive: Port-A-Punch". 03.ibm.com. 2003-01-23. Retrieved 2013-10-05.
  67. ^ Winter, Dik T. "96-column Punched Card Code". Archived from the original on 2007-04-15. Retrieved 2012-11-06.
  68. ^ "The Punched Card". Quadibloc.com. Retrieved 2013-10-05.
  69. ^ Winter, Dik T. "90-column Punched Card Code". Archived from the original on 2005-02-28. Retrieved 2012-11-06.
  70. ^ Fisher, Lawrence M. (1998-09-18). "Reynold Johnson, 92, Pioneer In Computer Hard Disk Drives". The New York Times. Retrieved 2010-06-26.
  71. ^ "IBM Archives/Business Machines: Fred M. Carroll". 03.ibm.com. IBM. Retrieved 2013-10-05.
  72. ^ "IBM Archives: Fred M. Carroll". 03.ibm.com. IBM. 2003-01-23. Retrieved 2013-10-05.
  73. ^ "IBM Archives: Carroll Press". 03.ibm.com. IBM. 2003-01-23. Retrieved 2013-10-05.
  74. ^ "IBM Archives:1 939 Layout department". 03.ibm.com. IBM. 2003-01-23. Retrieved 2013-10-05.
  75. ^ Cortada, James W. [at Wikidata] (2019). IBM: The Rise and Fall and Reinvention of a Global Icon. MIT Press. p. 68. ISBN 978-0-262-03944-4.
  76. ^ Tyler, Theodore (1968). The Man Whose Name Wouldn't Fit. Doubleday Science Fiction.
  77. ^ Brown, Betsy (1987-12-06). "Westchester Bookcase". The New York Times. Edward Ziegler […] an editor at the Reader's Digest […] wrote a science fiction novel, The Man Whose Name Wouldn't Fit, under the pen name Theodore Tyler
  78. ^ "Mayalin.com". Mayalin.com. 2009-01-08. Retrieved 2013-10-05.
  79. ^ "Mizzou Alumni Association – Campus Traditions". Mizzou Alumni Association. Retrieved 2016-04-21.
  80. ^ "University of Wisconsin-Madison Buildings". Fpm.wisc.edu. Retrieved 2013-10-05.
  81. ^ "Photo of Gamble Hall by gatty790". Panoramio.com. Archived from the original on 2013-07-15. Retrieved 2013-10-05.
  82. ^ "All About CRT Display Terminals" (PDF). p. 11. Retrieved 2023-01-16.
  83. ^ Rader, Ron (1981-10-26). "Big Screen, 132-Column Units Setting Trend". Computerworld. Special Report p. 41. Retrieved 2023-01-16.
  84. ^ Clarke, Arthur C. (May 1946). Rescue Party. Baen Books.
  85. ^ Lee, John A. N. "Charles A. Phillips". Computer Pioneers. Institute of Electrical and Electronics Engineers Inc. p. 557. Retrieved 2018-11-06.
  86. ^ "Fold, spindle, or mutilate". At the bottom of the bill, it said […] and Jane, in her anger, […]
  87. ^ Albertson, Dean (1975). Rebels or Revolutionaries? Student Movements of the 1960s. Simon and Schuster. ISBN 978-0-67118737-8. Retrieved 2018-11-06.
  88. ^ Disney, Doris Miles (1970). Do Not Fold, Spindle or Mutilate. Doubleday Crime Club. p. 183.

Further reading

  • Fierheller, George A. (2014-02-07). Do not Fold, Spindle or Mutilate: The "hole" story of punched cards (PDF). Markham, Ontario, Canada: Stewart Publishing & Printing. ISBN 978-1-894183-86-4. Archived (PDF) from the original on 2022-07-09. Retrieved 2018-04-03. (NB. An accessible book of recollections (sometimes with errors), with photographs and descriptions of many unit record machines.)
  • How to Succeed At Cards (Film). IBM. 1963. (NB. An account of how IBM Cards are manufactured, with special emphasis on quality control.)
  • Murray, Francis Joseph (1961). "Chapter 6 Punched Cards". Mathematical Machines: Digital Computers. Vol. 1. Columbia University Press. (NB. Includes a description of Samas punched cards and illustration of an Underwood Samas punched card.)
  • Solomon, Jr., Martin B.; Lovan, Nora Geraldine (1967). Annotated Bibliography of Films in Automation, Data Processing, and Computer Science. University of Kentucky.
  • Dyson, George (1999-03-01). "The Undead". Wired. Vol. 7, no. 3. Archived from the original on 2022-07-09. Retrieved 2017-07-04. (NB. Article about use of punched cards in the 1990s (Cardamation).)
  • Williams, Robert V. (2002). "Punched Cards: A Brief Tutorial". IEEE Annals of the History of Computing: Web Extra. 24 (2). IEEE. Archived from the original on 2018-06-13. Retrieved 2015-03-26.
Wikimedia Commons has media related to Punch card.
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Punched_card&oldid=1174169118"