Jump to content

Audio Alchemy

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 99.227.222.231 (talk) at 08:46, 13 November 2012 (→Digital processors). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Audio Alchemy was a high fidelity audio equipment manufacturer based in California, USA. It produced many lines of relatively affordable audio products, including CD players, transports, digital audio processors, and amplifiers. They have since gone out of business, the primary engineers moving on to found Channel Islands Audio and (now defunct) Perpetual Technologies. Audio Alchemy products made innovative use of the I²S audio interface, usually reserved for the internal connection between the CD transport and DAC of a CD player. Audio Alchemy brought the interface out to a DIN connector, allowing a very low jitter connection between the CD transport and external DAC, by transmitting the clock signal and the audio signal in parallel. This offers a superior alternative connectivity method to something like S/PDIF, which sees the clock signal embedded into the audio signal. The process of extracting the clock signal from the data stream is where jitter is introduced. Perpetual Technologies and Camelot Technology also produce products that use the I²S interface. Several members of the original Audio Alchemy team, including Peter Madnick, Audio Alchemy's co-founder, have formed Alchemy².

Acronyms used in Audio Alchemy products

  • DDE - Digital Decoding Engine, a digital to analogue converter
  • DDS - Digital Drive System, a transport
  • DTI - Digital Transmission Interface, a digital to digital processor

Product history

CD transports

  • DDS 1.0 (Sony drive based three blocks transport)
  • DDS 2.0 (aka DDS II Sony drive based transport)
  • DDS 3.0 (aka DDS III Sony drive based transport)
  • DDS Pro (Pioneer Stable Platter drive based two blocks transport)

CD players

  • ACD-1
  • ACD-2
  • ACD Pro (Pioneer Stable Platter drive based player)

Digital processors

  • DDE 1.0 - 1-bit
  • DDE 1.1
  • DDE 1.2 - 20-bit, HDCD, TOSLink/BNC/XLR/I2s inputs (similar to DDE 3.0)
  • DDE 2.0 - 20-bit, TOSLink/3xBNC inputs
  • DDE 3.0 - 20-bit, HDCD, TOSLink/BNC/I2s inputs (optional dithering and remote control processor)
  • DTI 1.0 - a jitter reducing processor
  • DTI 2.0 - a jitter reducing processor
  • DTI Pro - a jitter reducing processor
  • DTI Pro32 - a jitter reducing and dithering processor
  • DTI+ - a jitter reducing processor
  • UltraDAC - Combination of a DTI and DAC-In-The-Box (DITB) in one chassis
  • DAC-In-The-Box - an inexpensive DAC
  • Dac*Man - an inexpensive DAC with integrated analog audio cables
  • EDI - Extended Digital Interface, an BNC in - I2S out jitter reducing processor
  • XDP - Extended Digital Processor, an I2S input DAC

Preamplifiers

  • DLC - Digital Line Controller, a remote-controlled preamplifier
  • LIS - Line Input Selector, tape loop and input/output expander for the DLC
  • Vac-In-The-Box - A dedicated MM/MC phono preamplifier

Amplifiers

  • OM150 - 150Wpc (into 8 ohms) solid state stereo amplifier, Class A up to 20W
  • OM90.1 - 90W (into 8 ohms), 160W (into 4 ohms) amplifier, Class A at 8 ohms and 4 ohms

Accessories

- Devices

  • HPA 1.0 - HeadPhone Amplifier, a dedicated headphone amplifier
  • RW-1 - Remote Wand, an optional (DDE 3.0) or standard (DLC) remote control for Audio Alchemy gear
  • VRE 1.0 - Visual Reality Engine, a composite to SVHS external comb filter

- Power

  • Power Station One - a basic high-current power supply
  • Power Station Two - an upgraded power supply that can power two separate Audio Alchemy products
  • Power Station Three - an upgraded power supply that can supply higher current to a single Audio Alchemy product
  • Power Station Four - a high-current dual-output power supply
  • Power Station Five - a high-current power supply for DDE 1.2
  • Power Station Automotive - a 12V input (car battery) dual-output power supply
  • PSU 150M - an optional power supply for use an OM150 amplifier in dual mono mode

- Cables

  • ClearLink - an interconnect cable
  • ClearStream - an interconnect cable with built-in RF suppression circuit
  • ClearStream Digital - a coaxial digital cable with built-in RF suppression circuit
  • I²S - an I²S cable
  • DST 1.0 - Data Stream Transceiver, an active digital cable with TOS/BNC input and BNC out

- Other

  • ClearBit - an antistatic and optical enhancer fluid for your CDs
  • IsoPuck - an antiresonance feet for audio equipment

Product images

  • Visual Reality Engine v1.0
    Visual Reality Engine v1.0
  • Visual Reality Engine v1.0
    Visual Reality Engine v1.0
  • DAC in the box
    DAC in the box
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Audio_Alchemy&oldid=522790405"