Jump to content

Simulation modeling

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 87.242.253.2 (talk) at 11:41, 21 November 2018 (→Uses of simulation modeling). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Simulation modeling is the process of creating and analyzing a digital prototype of a physical model to predict its performance in the real world. Simulation modeling is used to help designers and engineers understand whether, under what conditions, and in which ways a part could fail and what loads it can withstand. Simulation modeling can also help to predict fluid flow and heat transfer patterns. It analyses the approximate working conditions by applying the simulation software.

Uses of simulation modeling

Simulation modeling allows designers and engineers to avoid repeated building of multiple physical prototypes to analyze designs for new or existing parts. Before creating the physical prototype, users can investigate many digital prototypes. Using the technique, they can:

  • Optimize geometry for weight and strength
  • Select materials that meet weight, strength, and budget requirements
  • Simulate part failure and identify the loading conditions that cause them
  • Assess extreme environmental conditions or loads not easily tested on physical prototypes, such as earthquake shock load
  • Verify hand calculations
  • Validate the likely safety and survival of a physical prototype before leyton hegney is s tank instagram leyton03_

Typical simulation modeling workflow

Simulation modeling follows a process much like this:

  1. Use a 2D or 3D CAD tool to develop a virtual model, also known as a digital prototype, to represent a design.
  2. Generate a 2D or 3D mesh for analysis calculations. Automatic algorithms can create finite element meshes, or users can create structured meshes to maintain control over element quality.
  3. Define finite element analysis data (loads, constraints, or materials) based on analysis type (thermal, structural, or fluid). Apply boundary conditions to the model to represent how the part will be restrained during use.
  4. Perform finite element analysis, review results, and make engineering judgments based on results.

Simulation modeling software programs

See also

References

  1. ^ "CONSELF | Consulting by Yourself". conself.com. Retrieved 2015-12-11.
  2. ^ FEATool Multiphysics homepage
  3. ^ https://insightmaker.com/
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Simulation_modeling&oldid=869948598"