Peugeot ROA
The Peugeot ROA is an Iranian made car (by Iran Khodro Co). It is a developed version of the Peugeot RD1600. The car is a combination of Paykan and Peugeot 405. The body of ROA is a copy from Peugeot 405 and its engine and chassis are developed and modified from Iran Khodro's Paykan's chassis. Contrary to all other Peugeot 405 versions, the ROA is a rear-wheel drive car.
Engine
At its core[1] The engine is the Rootes 1.6 Hillman Avenger[2] (which were used on Paykans since late 70s) and was mated to the Hunter gearbox and rear axle
Model (2010): A developed model with a 1,700 cc CNG engine. In older models Iran Khodro used a modified version of the Paykan's 1.6-litre engine.
The engine specifications are as follows:
- Engine type: Inline-four-cylinder; four-stroke; 1,599 cc (1,696 cc)
- No. of bearings: 5
- Bore: 87.3 mm (1700)
- Stroke: 66.7 mm (1700)
- Cylinder head: Aluminum
- Engine block: Cast iron
- Maximum power: 61 kW (83 PS) at 5,000 rpm (1700)
- Maximum torque: 135 Nm at 3,000 rpm (1700)
- Compression ratio: 9.5:1 (1700)
- Ignition sequence: 1-3-4-2
References
- ^ Shahin (2011-03-07). "Peugeot RD". Paykan Hunter. Archived from the original on 2020-12-03.
- ^ "Avenger EFI and the Peugeot ROA / RD 405". www.avenger.co.nz. Retrieved 2019-08-21.
- Peugeot Roa users' manual, Iran Khodro Co.