Remington Model 788
| Remington 788 | |
|---|---|
 Remington 788 | |
| Type | Rifle |
| Place of origin |  United States |
| Production history | |
| Designer | Wayne Leek |
| Manufacturer | Remington Arms |
| Produced | 1967 to 1983 |
| No. built | approx 565,000 |
| Variants | Left-hand in 6mm Remington and .308 Win. |
| Specifications | |
| Cartridge | .222 Remington .223 Remington |
| Action | Bolt-action repeater |
| Feed system | 3-rd, single-column box magazine |
Known as "Remington’s budget tackdriver",[1] the Remington 788 is an inexpensive yet accurate hunting rifle developed by the Remington Arms Company to compete with other gun companies' less expensive rifles and marketed alongside their more expensive Model 700 line. The 788 utilizes a single-column detachable magazine holding 3 rounds. A .22 rimfire model was also produced known as the 580, 581, or 582 depending on its method of feed. A target version of the .22 caliber 58x series, the 540X, was used by the US Military[2] as a training rifle and later disposed through the Civilian Marksmanship Program.
Distinguishing Design Characteristics
The Remington 788 has two distinguishing design features. The first is the rear-lugged bolt. The bolt has 9 lugs in three rows of three lugs each. They lock into the receiver behind the magazine well. Due to this design, the bolt handle lifts only 60 degrees on opening giving more clearance for scopes compared to the 90 degrees required for the Model 700 and other two lug rifles. The bolt travel is also reduced because of the rear lugs. The bolt pictured is a pre-1975 locking model from a .308 Win caliber rifle. The locking bolt requires the safety to be in the 'fire' or 'off' posiition in order to rotate the handle and actuate the bolt. Rifles manufactured from 1975 to 1983 have non locking bolts which can be actuated while the safety is engaged. The second distinguishing feature is the receiver. It has a smaller ejection port than similar bolt action rifles, and no bolt lug raceways. The single stack magazine design yields a smaller feed opening in the bottom of the receiver compared to rifles using a double stack magazine well. When machining of these smaller ports is complete there is more steel remaining in the receiver between the ejection port and adjacent feed port, and significantly more steel overall where all receivers have the least strength. These characteristics combined to make the Remington 788 receiver more rigid and stronger than most, if not all, competing designs, including the Remington 700 which shares the same outside receiver diameter. A rifle's accuracy tends to increase slightly as the rigidity of the receiver increases, as this slightly reduces barrel deflection during firing. Thus the Remington 788 has the structural foundation to be a very accurate rifle.
Production History
Remington produced approximately 565,000 model 788s from 1967 to 1983.[3]
| Rifle | Year | w/18 ½" barrel |
|---|---|---|
| .222 Rem | 1967–1980, 1982 | |
| .223 Rem | 1975 | |
| .22-250 Rem | 1967 | |
| .243 Win | 1968 | 1980 |
| 6mm Rem | 1969–1980 | |
| 6mm Rem Left Hand | 1969–1980 | |
| 7mm-08 Rem | 1980 | |
| .308 Win | 1969 | |
| .308 Win Left Hand | 1969–1980 | 1980 |
| .30-30 Win | 1967–1970 | |
| .44 Rem Mag | 1967–1970 |
See also
References
- ^ Remington Arms http://www.remington.com/products/archived/centerfire/bolt-action/model-788.aspx
- ^ American Rifleman magazine, may 1976, pp 42
- ^ Remington Arms