Jump to content

IATA airport code

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Piledhigheranddeeper (talk | contribs) at 14:50, 31 August 2020 (→History: small expansion). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Not to be confused with ICAO airport code.
A baggage tag for a flight heading to Oral Ak Zhol Airport, whose IATA airport code is URA.

An IATA airport code, also known as an IATA location identifier, IATA station code, or simply a location identifier,[1] is a three-letter geocode designating many airports and metropolitan areas around the world, defined by the International Air Transport Association (IATA). The characters prominently displayed on baggage tags attached at airport check-in desks are an example of a way these codes are used.

The assignment of these codes is governed by IATA Resolution 763, and it is administered by the IATA's headquarters in Montreal. The codes are published semi-annually in the IATA Airline Coding Directory.[2]

IATA also provides codes for railway stations and for airport handling entities. A list of airports sorted by IATA code is available. A list of railway station codes, shared in agreements between airlines and rail lines such as Amtrak, SNCF French Railways, and Deutsche Bahn, is available. Many railway administrations have their own list of codes for their stations, such as the list of Amtrak station codes.

List

List of airports by IATA airport code: A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z

See also: Lists of airports by IATA and ICAO code


History

Airport codes arose out of the convenience that the practice brought pilots for location identification in the 1930s. Initially, pilots in the United States used the two-letter code from the National Weather Service (NWS) for identifying cities. This system became unmanageable for cities and towns without an NWS identifier, and the use of two letters allowed only a few hundred combinations; a three-letter system of airport codes was implemented. This system allowed for 17,576 permutations, assuming all letters can be used in conjunction with each other.[3]

Naming conventions

Predominantly, airport codes are named after the first three letters of the city in which it is located—ATL for Atlanta, SIN for Singapore, ASU for Asunción, MEX for Mexico City, DEN for Denver; IST for Istanbul; or a combination of the letters in its name, ALA for Almaty (formerly known as Alma-Ata), EWR for Newark, GDL for Guadalajara, JNB for Johannesburg, HKG for Hong Kong, SLC for Salt Lake City and WAW for Warsaw. Some airports in the United States retained their NWS codes and simply appended an X at the end, such as LAX for Los Angeles, PDX for Portland, and PHX for Phoenix.[3]

Sometimes the airport code reflects pronunciation, rather than spelling, such as NAN, which reflects the pronunciation of "Nadi" as [ˈnandi] in Fijian, where "d" is realized as the prenasalized stop [ⁿd].

For many reasons, some airport codes do not fit the normal scheme described above. Some airports, for example, cross several municipalities or regions, and therefore, use codes derived from some of their letters, resulting in DFW for Dallas/Fort Worth, DTW for Detroit–Wayne County, LBA for Leeds–Bradford (Airport), MSP for Minneapolis–Saint Paul, and RDU for Raleigh–DUrham. Other airports—particularly those serving cities with multiple airports—have codes derived from the name of the airport itself, such as JFK for New York's John F. Kennedy or CDG for Paris' Charles de Gaulle (see below). In some cases, the code comes from the airport's unofficial name, such as Kahului Airport's OGG (for local aviation pioneer Jimmy Hogg).

Canada's unusual codes–which bear little to no similarity with any conventional abbreviation to the city's name–such as YUL in Montréal, and YEG in Edmonton, originated from the two-letter codes used to identify weather reporting stations in the 1930s. The letters preceding the two-letter code follow the following format:

  • Y (meaning "yes") if the reporting station was co-located with an airport.
  • W (meaning "without") if the reporting station was not co-located with an airport.
  • X if the last two letters of the code had already been taken by another Canadian airport.
  • Z if the resulting code had already been taken by a US airport.

Cities with multiple airports

In large metropolitan areas, airport codes are often named after the airport itself instead of the city it serves, while another code is reserved which refers to the city itself. For instance:

Or using a code for the city in one of the major airports and then assigning another code to another airport:

When different cities with the same name each have an airport, they need to be assigned different codes. These are some examples:

Sometimes, a new airport is built, replacing the old one, leaving the city's new "major" airport (or the only remaining airport) code to no longer correspond with the city's name. The original airport in Nashville, Tennessee was built in 1936 as part of the Works Progress Administration and called Berry Field with the designation, BNA. A new facility known as Nashville International Airport was built in 1987 but still uses BNA. This is in conjunction to rules aimed to avoid confusion that seem to apply in the United States, which state that "the first and second letters or second and third letters of an identifier may not be duplicated with less than 200 nautical miles separation."[3] Thus, Washington D.C. area's three airports all have radically different codes: IAD for Washington–Dulles, DCA for Washington–Reagan (District of Columbia Airport), and BWI for Baltimore (Baltimore–Washington International, formerly BAL).[3] Since HOU is used for William P. Hobby Airport, the new Houston–Intercontinental became IAH.[3] The code BKK was originally assigned to Bangkok–Don Mueang and was later transferred to Suvarnabhumi Airport, while the former adopted DMK. The code ISK was originally assigned to Gandhinagar Airport (Nashik's old airport) and later on transferred to Ozar Airport (Nashik's current airport). Shanghai–Hongqiao retained the code SHA, while the newer Shanghai–Pudong adopted PVG. The opposite is true for Berlin: the airport Berlin–Tegel uses the code TXL, while its smaller counterpart Berlin–Schönefeld uses SXF; the yet-to-open Berlin Brandenburg Airport has the airport code BER, which is also part of its branding. The airports of Hamburg (HAM) and Hannover (HAJ) are less than 100 nautical miles (190 km) apart and therefore share the same first and middle letters, indicating that this rule might be followed only in Germany.

Cities or airports changing names

Many cities retain historical names in their airport codes, even after having undergone an official name/spelling/transliteration change:

Some airport codes are based on previous names associated with a present airport, often with a military heritage. These include:

  • Chicago's O'Hare, which is assigned ORD based on its old name of Orchard Field. It was expanded and renamed O'Hare in the mid-1950s.
  • Orlando International Airport was founded as Orlando Army Air Field #2 but uses MCO for having been renamed McCoy Air Force Base in 1959 in honor of a wing commander who crashed at the field in 1958. It was converted in the early 1960s to joint civilian/military use and renamed Orlando Jetport at McCoy, then renamed Orlando International Airport in the early 1980s.
  • Spokane International Airport was so named in 1960 but goes by GEG because it was built on the former Geiger Field, renamed in 1941 for Major Harold Geiger when the US Army acquired it.

Other airport codes are inconspicuous in origin, and each has its own peculiarities:

  • Nashville uses BNA for its former name as Berry Field, henceforth Berry Nashville Airport
  • Louisville Muhammad Ali International Airport is SDF for Standiford Field, its original name.
  • Knoxville uses TYS for Charles McGhee Tyson, whose family donated the land for the first airport in Knoxville
  • Kahului, the main gateway into Maui, uses OGG in homage to Hawaiian aviation pioneer Bertram J. Hogg
  • Gold Coast, Australia uses OOL due to its former name as Coolangatta Airport, named after the suburb in which it is located
  • Sunshine Coast, Australia uses MCY due to its former names Maroochydore Airport and Maroochydore-Sunshine Coast Airport. It is actually located in Marcoola rather than Maroochydore

In Asia, codes that do not correspond with their city's names include Niigata's KIJ, Nanchang's KHN, Pyongyang's FNJ, and Kobe's UKB.

Multiple codes for a single airport

EuroAirport Basel Mulhouse Freiburg, which serves three countries, has three airport codes: BSL, MLH, EAP

Airport codes using the English name of the city

Some European cities have a different name in their respective language than in English, yet the airport code represents only the English name. Examples include:

  • CGN - Cologne/Köln (Germany)
  • CPH - Copenhagen/København (Denmark)
  • FLR - Florence/Firenze (Italy)
  • GVA - Geneva/Genève (Switzerland)
  • OPO - Oporto/Porto (Portugal)
  • PRG - Prague/Praha (Czechia)
  • VCE - Venice/Venezia (Italy)
  • VIE - Vienna/Wien (Austria)

Use in colloquial speech

Some airports are identified even in the colloquial speech by their airport code. The most notable examples are LAX and JFK.[citation needed]

National policies

United States

Since the U.S. Navy reserved "N" codes and to prevent confusion with Federal Communications Commission broadcast call signs beginning with "W" and "K", certain U.S. cities which begin with these letters had to adopt "irregular" airport codes when their airports opened: EWR for Newark, ORF for Norfolk, Virginia, EYW for Key West, Florida, OME for Nome and APC for Napa, California.[3] This practice is not followed outside the United States: Karachi is KHI, Warsaw is WAW, and Nagoya is NGO. In addition, since three letter codes starting with Q are widely used in radio communication, cities with "Q" beginning their name also had to find alternate codes, as in the case of Qiqihar (NDG), Quetta (UET), Quito (UIO), and Quimper (UIP).[citation needed]

IATA codes should not be confused with the FAA identifiers of US airports. Most FAA identifiers agree with the corresponding IATA codes, but some do not, such as Saipan whose FAA identifier is GSN and its IATA code is SPN, and some coincide with IATA codes of non-US airports.[citation needed]

Canada

Most large airports in Canada have codes that begin with the letter "Y", although not all "Y" codes are Canadian (for example, YUM for Yuma, Arizona and YNT for Yantai, China) and not all Canadian airports start with the letter "Y" (for example ZBF for Bathurst, New Brunswick). Many Canadian airports have a code that starts with W, X or Z, but none of these are major airports. When the Canadian transcontinental railways were built, each station was assigned its own two-letter Morse code. VR stands for Vancouver, TZ Toronto, QB Quebec, WG Winnipeg, SJ Saint John, YC Calgary, OW Ottawa, EG Edmonton, etc. When the Canadian government established airports, it used the existing railway codes for them as well. If the airport had a weather station, authorities added a "Y" to the front of the code, meaning "Yes" to indicate it had a weather station or some other letter to indicate it did not. When international codes were created in cooperation with the United States, because "Y" was seldom used in the US, Canada simply used the weather station codes for its airports, changing the "Y" to a "Z" if it conflicted with an airport code already in use. The result is that most major Canadian airport codes start with "Y" followed by two letters in the city's name: YOW for Ottawa, YWG for Winnipeg, YYC for Calgary, and YVR for Vancouver, whereas other Canadian airports append the two-letter code of the radio beacons that were the closest to the actual airport, such as YQX in Gander and YXS in Prince George.

Four of the ten provincial capital airports in Canada have ended up with codes beginning with YY, including YYZ for Toronto, Ontario, YYJ for Victoria, British Columbia, YYT for St. John's, Newfoundland, and YYG for Charlottetown, Prince Edward Island. Canada's largest airport is YYZ for Toronto–Pearson (YTZ was used for Toronto City Airport, so YYZ is the station code for a village called Malton, which is where Toronto Pearson International Airport is actually located). YUL is used for Montréal–Trudeau (UL was the ID code for beacon in the city of Kirkland, now the location of Montréal–Trudeau). While these codes make it difficult for the public to associate them with a particular Canadian city, some codes have become popular in usage despite their cryptic nature, particularly at the largest airports. Toronto's code has entered pop culture in the form of "YYZ", a song by the rock band Rush which utilizes the Morse code signal as a musical motif. Some airports have started using their IATA codes as marketing brands. Calgary International Airport has begun using its airport code YYC as a marketing brand and name for the airport authority web site (yyc.com),[4] while Vancouver International Airport advertises as YVR (yvr.com).

New Zealand

Numerous New Zealand airports use codes which contain a letter Z, to distinguish them from similar airport names in other countries. Examples include HLZ for Hamilton, ZQN for Queenstown, and WSZ for Westport.

Lack of codes

There are several airports with scheduled service that have not been assigned ICAO codes that do have IATA codes. For example, several airports in Alaska have scheduled commercial service, such as Stebbins and Nanwalek, which use FAA codes instead. There are also airports with scheduled service for which there are ICAO codes but not IATA codes, such as Nkhotakota Airport/Tangole Airport in Malawi or Chōfu Airport in Tokyo, Japan. There are also several minor airports in Russia (e.g. Omsukchan Airport) which instead use internal Russian codes for booking. Flights to these airports cannot be booked through the international air booking systems or have luggage transferred to there, and thus, they are booked instead through the airline or a domestic booking system. Thus, neither system completely includes all airports with scheduled service.

See also

References

  1. ^ IATA. "IATA - Codes - Airline and Airport Codes Search". www.iata.org. Archived from the original on 2008-10-13. Retrieved 2009-09-22.
  2. ^ IATA. "IATA - Airline Coding Directory". www.iata.org.
  3. ^ a b c d e f g "Airport ABCs: An Explanation of Airport Identifier Codes". Air Line Pilot. Air Line Pilots Association. 1994. Retrieved 6 January 2012.
  4. ^ "YYC: Calgary Airport Authority". Retrieved 22 March 2015.
Wikivoyage has a travel guide for Metropolitan area airport codes.
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=IATA_airport_code&oldid=975985759"