Jump to content

Canadian Car and Foundry

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Bill Henry (talk | contribs) at 20:27, 7 March 2021 (Removal of links to deleted wikipedia pages). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A preserved 1954 CCF-Brill trolley bus on the Edmonton trolley bus system

Canadian Car and Foundry (CC&F), also variously known as "Canadian Car & Foundry" or more familiarly as "Can Car", manufactured buses, railroad rolling stock, Forestry Equipment and later aircraft for the Canadian market. CC&F history goes back to 1897, but the main company was established in 1909 from an amalgamation of several companies and later became part of Hawker Siddeley Canada through the purchase by A.V. Roe Canada in 1957. Today the remaining factories are part of Bombardier Transportation Canada.

History

Portable power plant built by Canadian Car and Foundry[1]

Canadian Car & Foundry (CC&F) was established in 1909 in Montreal as the result of an amalgamation of three companies:

In 1911 the CC&F Board of Directors recognized that the company could improve its efficiency if they were able to produce their own steel castings, a component that was becoming common to all their products. They purchased Montreal Steel Works Limited at Longue-Pointe, the largest producer of steel castings in Canada, and the Ontario Iron and Steel Company, Ltd at Welland, ON, which included both a steel foundry and a rolling mill.

Buses and Forestry Equipment were produced at Fort William, Ontario and railcars in Montreal and Amherst. Streetcars were manufactured between 1897 and 1913, however the company focused exclusively on rebuilding existing streetcars after 1913.

A few years later, CC&F acquired the assets of Pratt & Letchworth, a Brantford, ON, rail car manufacturer. In the latter part of World War I, the expanding company opened a new plant in Fort William (now Thunder Bay) to manufacture rail cars and ships which included the Inkerman and Cerisoles which were both lost in Lake Superior; the Amherst plant started by Rhodes & Curry in Amherst was closed in 1931. In an attempt to enter the aviation market, CC&F produced a small series of Grumman fighter aircraft under licence and developed an unsuccessful, indigenous-designed fighter aircraft, the Gregor FDB-1.

Canada Car Company

Canada Car Company was a railcar manufacturer based in Turcot, Quebec (a suburb of Montreal), and later merged with several other companies to form Canadian Car and Foundry in 1909.[2] Canada Car Company was incorporated January 1905 with W.P. Coleman as president and Sir Hugh Allan as vice-president. The company's plant began operations in 1905 and manufactured freight and passenger cars.

Clients included:

Their products were:

  • wood freight and passenger cars
  • box cars
  • streetcars
  • flat cars
  • parlor cafe cars
  • dining cars

First World War

Minesweepers for France
Main article: Kingsland explosion

During World War I, CC&F had signed large contracts with Russia and Britain for delivery of ammunition. An enormous factory was constructed in the Kingsland to assemble, package, and prepare artillery shells for shipment to foreign ports. No shells were manufactured there. On January 11, 1917, a fire started in one of the buildings. In four hours, the fire spread to the approximately 500,000 pieces of 76.2 mm (3 inch) -high explosive shells stored there, causing several explosions, destroying the entire plant. The explosion launched artillery shells and building debris across the area, destroying several homes and businesses in the nearby towns of Haskell, Pompton Lakes, and Midvale. The total loss, including the ordnance, was estimated at $16,750,000 (equivalent to $404 million in 2023).[3][4][5]

Canadian Car and Foundry had a contract to build twelve minesweepers for the French Navy.[6][7] The vessels were completed in October and November 1918—before the war ended, but too late to see operational service. Two of the vessels, the Cerisoles and the Inkerman, were lost in a November gale, on Lake Superior, on their maiden voyage. Other vessels were sold into civilian service.

Second World War

CC&F Hawker Hurricane X on a test flight over Fort William, Ontario
CC&F-built Harvard Mk.4

By 1939, with war on the horizon, Canadian Car & Foundry and its Chief Engineer, Elsie MacGill, were contracted by the Royal Air Force to produce the Hawker Hurricane (Marks X, XI and XII). Refinements introduced by MacGill on the Hurricane included skis and de-icing gear. When the production of the Hurricane was complete in 1943, CC&F's workforce of 4,500 (half of them women) had built over 1,400 aircraft, about 10% of all Hurricanes built.[8][9]

Following the success of the Hurricane contract, CC&F sought out and received a production order for the troublesome Curtiss SB2C Helldiver. Eventually, 834 Helldivers were produced by CC&F in various versions from SBW-1, SBW-1B, SBW-3,SBW-4E and SBW-5. Some of the Curtiss divebombers were sent directly to the Royal Navy under Lend-Lease arrangements. CC&F also built the North American AT-6 Texan/Harvard under licence, many of the aircraft being supplied to European air forces to train post war military pilots.

In 1944, the Canadian Car & Foundry built a revolutionary new aircraft in its Montreal shops - the Burnelli CBY-3, also called the Loadmaster. There were two examples built of an aerofoil-fuselage design originally developed by Vincent J. Burnelli. The CBY-3 was never to enter full-scale production and was cancelled less than one year later.

The work of Canadian women building fighter and bomber aircraft at the plant during the Second World War is documented in the 1999 National Film Board of Canada documentary film Rosies of the North.[10]

Postwar developments

After the Second World War, the CC&F returned to its roots as a rail car manufacturer. They also made a successful leap into the streetcar business, supplying Montreal, Toronto, Regina, Calgary, Vancouver, Edmonton, and the Brazilian cities of Rio de Janeiro and São Paulo with various types of streetcars. The company concluded a licensing agreement with ACF-Brill (the successor to J. G. Brill) in 1944 to manufacture and sell throughout Canada buses and trolley coaches of ACF-Brill design as Canadian Car-Brill, in later years often written "CCF-Brill", for short. CC&F built 1,114 trolley buses[11] and a few thousand buses under the name. Trolleybus production ended in 1954; Edmonton Transit System's No. 202, a 1954 CCF-Brill T48A, was the last Brill trolleybus built for any city.[12]

Production of the Brill diesel bus continued through the 1950s. In 1960, CC&F launched an entirely new TD bus design under the Canadian Car name to compete with the General Motors New Look model, but it was not successful and production was discontinued in 1962.

In 1957, wishing to diversify, the British Hawker Siddeley Group acquired CC&F through its Canadian subsidiary, A.V. Roe Canada Ltd.. In 1962, A.V. Roe Canada was dissolved when the Avro Arrow program was suddenly terminated, and its assets became part of Hawker Siddeley Canada. During the 1970s they introduced the BiLevel Coach heavy railway passenger car, which would go on to great success.

In the late 1970s and early 1980s the plant built 190 Canadian Light Rail Vehicles, for the Toronto Transit Commission, to replace its aging PCC streetcars.[13]

CCF re-emerged as Can-Car Rail in 1983 as a joint division between Hawker Siddeley Canada and UTDC. The Can-Car Rail operations were based in Thunder Bay. Sold to SNC-Lavalin in 1986, a financial shakeup led to the firm being returned to the Government of Ontario, and then quickly re-sold to Bombardier Transportation. Through a series of further acquisitions, mergers and rationalisations, CC&F faded from the annals of significant Canadian manufacturers, although the company still exists today as the Bombardier Transportation Canada Inc. railcar facility in Thunder Bay, Ontario.

Products

Transit

Other

Aircraft

Customers

Preservation

Many CC&F-built buses have been preserved as historic vehicles, some in operating condition. For example, the Transit Museum Society, in Vancouver, has at least seven CC&F buses in its collection, including two CC&F-Brill trolleybuses.[14]

See also

Notes

  1. ^ "Welcome to Saskrailmuseum.org." Archived October 15, 2008, at the Wayback Machine Sask Power Car, September 11, 2008. Retrieved: 3 October 2008.
  2. ^ Canada Car Company
  3. ^ "Kingsland N.J. Fire Loss is $16,750,000". The Sun. New York City. January 13, 1917. p. 4. Retrieved 12 January 2017.
  4. ^ "The Kingsland Explosion". Lyndhurst Historical Society. Retrieved January 12, 2017.
  5. ^ "Kingsland and Haskell Disasters". Safety Engineering. 33 (1): 28–32. January 1917.
  6. ^ Andrew Krueger (2017-08-20). "99 years after two French minesweepers vanished in a Lake Superior storm, a new search aims to solve the mystery". Duluth News Tribune. Retrieved 2018-07-09.
  7. ^ Tory Trunrud (2016-10-16). "Blueberry Boat made here". Chronicle Journal. Retrieved 2018-07-09. Officially name the Lutzen, this 43.6-metre, 339-ton vessel was part of an order for a dozen trawlers/minesweepers placed with an American shipbuilding company by the French government during the First World War.
  8. ^ Saxberg, Kelly (director). Rosies of the North (Documentary film on the wartime role of women workers at Fort William) National Film Board of Canada, 1999. Retrieved: 23 July 2012.
  9. ^ Pigott, Peter (2002). Wings across Canada an illustrated history of Canadian aviation. Toronto, Ontario: Dundurn Press. p. 81. ISBN 9781554883790.
  10. ^ "Rosies of the North". Documentary film. National Film Board of Canada. 1999. Retrieved 3 October 2014.
  11. ^ a b c Porter, Harry and Stanley F.X. Worris. Trolleybus Bulletin No. 109: Databook II, 1979, pp. 63–64. Louisville, Kentucky: North American Trackless Trolley Association (defunct).
  12. ^ Trolleybus Magazine No. 283, January–February 2009, p. 11. National Trolleybus Association (UK). ISSN 0266-7452.
  13. ^ John Thompson (2018-01-05). "The car that saved Toronto's streetcars". Railway Age. Retrieved 2018-07-09. It was decided that 200 new single-unit streetcars would be needed. The TTC originally planned to design a new car itself, in cooperation with its builder of choice, Canadian Car of Thunder Bay, Ontario. Hawker Siddeley Canada, the aircraft company, owned Canadian Car at that time. Consideration may have been given to equipping new bodies with trucks and controls from scrapped PCCs, which would have dramatically reduced costs.
  14. ^ "The Historic Bus Fleet." Archived 2010-03-08 at the Wayback Machine Transit Museum Society, 2009. Retrieved: 7 April 2010.

Bibliography

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Canadian_Car_and_Foundry&oldid=1010875589"