Jump to content

Ammonia production

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 202.94.72.180 (talk) at 07:03, 4 October 2021 (→Perdaman Plant). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ammonia

Ammonia is one of the most highly produced inorganic chemicals. There are numerous large-scale ammonia production plants worldwide, producing a total of 144 million tonnes of nitrogen (equivalent to 175 million tonnes of ammonia) in 2016.[1] China produced 31.9% of the worldwide production, followed by Russia with 8.7%, India with 7.5%, and the United States with 7.1%. 80% or more of the ammonia produced is used for fertilizing agricultural crops. Ammonia is also used for the production of plastics, fibers, explosives, nitric acid (via the Ostwald process) and intermediates for dyes and pharmaceuticals.

History

Before the start of World War I, most ammonia was obtained by the dry distillation of nitrogenous vegetable and animal products; by the reduction of nitrous acid and nitrites with hydrogen; and also by the decomposition of ammonium salts by alkaline hydroxides or by quicklime, the salt most generally used being the chloride (sal-ammoniac).

Block flow diagram of the ammonia synthesis process.

Today, most ammonia is produced on a large scale by the Haber process with capacities of up to 3,300 tonnes per day. In this process, N2 and H2 gases are allowed to react at pressures of 200 bar. Ammonia is also processed by coal.

The American Oil Co in the mid-1960s positioned a single-converter ammonia plant engineered by M.W. Kellogg at Texas City, TX, with a capacity of 544 m.t./day. The single-train design concept was so thoroughgoing that it received the “Kirkpatrick Chemical Engineering Achievement Award” in 1967. The plant used a four-case centrifugal compressor to compress the syngas to a pressure of 152 bar, and final compression to an operating pressure of 324 bar occurred in a reciprocating compressor. Centrifugal compressors for the synthesis loop and refrigeration services were also implemented, which provided significant cost, penny pinching it by a lot.

Almost every plant built between 1964 and 1992 had large single-train designs with synthesis gas manufacturing at 25–35 bar and ammonia synthesis at 150–200 bar. Another variation by Braun ((now KBR)) offered slight tempering to the plain design. The Braun Purifier process plants utilized a primary or tubular reformer with a low outlet temperature and high methane leakage to reduce the size and cost of the reformer. Excess air was added to the secondary reformer to reduce the methane content of the primary reformer exit stream to 1–2%. Excess nitrogen and other impurities were erased downstream of the methanator. Because the synthesis gas was essentially free of impurities, two axial-flow ammonia converters were used to attain a high ammonia conversion.

Modern ammonia-producing plants

A typical modern ammonia-producing plant first converts natural gas, liquified petroleum gas, or petroleum naphtha into gaseous hydrogen. The method for producing hydrogen from hydrocarbons is known as steam reforming.[2] The hydrogen is then combined with nitrogen to produce ammonia via the Haber-Bosch process.

Starting with a natural gas (CH
4) feedstock, the different steps used in the process of producing hydrogen are the following:

  • The first step in the process is to remove sulfur compounds from the feedstock because sulfur deactivates the catalysts used in subsequent steps. Sulfur removal requires catalytic hydrogenation to convert sulfur compounds in the feedstocks to gaseous hydrogen sulfide:
H2 + RSH → RH + H2S(gas)
  • The gaseous hydrogen sulfide is then adsorbed and removed by passing it through beds of zinc oxide where it is converted to solid zinc sulfide:
Illustrating inputs and outputs of steam reforming of natural gas, a process to produce hydrogen.
H2S + ZnO → ZnS + H2O
CH4 + H2O → CO + 3 H2
CO + H2O → CO2 + H2
  • The carbon dioxide is then removed either by absorption in aqueous ethanolamine solutions or by adsorption in pressure swing adsorbers (PSA) using proprietary solid adsorption media.
  • The final step in producing the hydrogen is to use catalytic methanation to remove any small residual amounts of carbon monoxide or carbon dioxide from the hydrogen:
CO  + 3 H2 → CH4 + H2O
CO2 + 4 H2 → CH4 + 2 H2O

To produce the desired end-product ammonia, the hydrogen is then catalytically reacted with nitrogen (derived from process air) to form anhydrous liquid ammonia. This step is known as the ammonia synthesis loop (also referred to as the Haber-Bosch process):

3 H2 + N2 → 2 NH3

Due to the nature of the (typically multi-promoted magnetite) catalyst used in the ammonia synthesis reaction, only very low levels of oxygen-containing (especially CO, CO2 and H2O) compounds can be tolerated in the synthesis (hydrogen and nitrogen mixture) gas. Relatively pure nitrogen can be obtained by air separation, but additional oxygen removal may be required.

Because of relatively low single pass conversion rates (typically less than 20%), a large recycle stream is required. This can lead to the accumulation of inerts in the loop gas.

The steam reforming, shift conversion, carbon dioxide removal and methanation steps each operate at absolute pressures of about 25 to 35 bar, and the ammonia synthesis loop operates at absolute pressures ranging from 60 to 180 bar depending upon which proprietary design is used. There are many engineering and construction companies that offer proprietary designs for ammonia synthesis plants. Haldor Topsoe of Denmark, Thyssenkrupp Industrial Solutions GmbH of Germany, Casale SA of Switzerland and Kellogg Brown & Root of the United States are among the most experienced companies in that field.

Sustainable ammonia production

Illustrating inputs and outputs of methane pyrolysis, a process to produce hydrogen.
Further information: Haber process § Economic and environmental aspects

Ammonia production depends on plentiful supplies of energy, predominantly natural gas. Due to ammonia's critical role in intensive agriculture and other processes, sustainable production is desirable. This is possible by using non-polluting methane pyrolysis or generating hydrogen by electrolysis of water (or steam) utilizing zero carbon electricity from renewable energy sources or nuclear power.

Illustrating inputs and outputs of simple electrolysis of water, for production of hydrogen.

This would be straightforward in a hydrogen economy by diverting some hydrogen production from fuel to feedstock use. For example, in 2002, Iceland produced 2,000 tons of hydrogen gas by electrolysis, using excess electricity production from its hydroelectric plants, primarily for the production of ammonia for fertilizer.[3] The Vemork hydroelectric plant in Norway used its surplus electricity output to generate renewable nitric acid from 1911 to 1971,[4] requiring 15 MWh/Ton of nitric acid. The same reaction is carried out by lightning, providing a natural source for converting atmospheric nitrogen to soluble nitrates.[5] In practice, natural gas will remain the major source of hydrogen for ammonia production as long as it is the cheapest.

Waste water is often high in ammonia. Because discharging ammonia laden water into the environment, even in wastewater treatment plants, can cause problems, nitrification is often necessary to remove the ammonia.[6] This may be a potentially sustainable source of ammonia in the future because of its abundance and the need to remove it from the water anyway.[7] Alternatively, ammonia from waste water is sent into an ammonia electrolyzer (ammonia electrolysis) operating with renewable energy sources (Solar PV and Wind turbine) to produce hydrogen and clean treated water.[8] Ammonia electrolysis may require much less thermodynamic energy than water electrolysis (only 0.06 V in alkaline media).[9]

Another option for recovering ammonia from waste water is to use the mechanics of the ammonia-water thermal absorption cycle.[10][11] Using this option, ammonia can be recovered either as a liquid or as ammonium hydroxide. The advantage of the former is that it is much easier to handle and transport, whereas the latter also has a commercial value when a concentration of 30 percent ammonium hydroxide in solution is produced.

Ammonia Made from coal

The Process to make ammonia from coal.

Ammonia made from coal is a process mainly practiced by China. China produced about 32.6% of the global production in 2014, while Russia, India, and the U.S. produced 8.1%, 7.6%, and 6.4%.[12] Most of their ammonia came from coal. The basic processing in a coal-based ammonia plant consists of an air separation module for the separation of O2 and N2 from air, the gasifier, the sour gas shift module, the acid gas removal module, and the ammonia synthesis module. Oxygen from the air separation module is fed to the gasifier to convert coal into synthesis gas (H2, CO, CO2) and CH4. There are many gasifier designs, but most gasifiers are based on fluidized beds that operate above atmospheric pressure and have the ability to utilize different coal feeds.

Frank-Caro Process

Adolph Frank and Nikodem Caro found that N² could be fixed by calcium carbide to form calcium-cyanamide, which could then be divide with water to form ammonia.

[13]

Perdaman Plant

The world's largest plant Perdaman is located in Western Australia. It produces 3,500 metric tons per day and 1,277,500 metric tons per year. [14] Perdaman Chemicals and Fertilizers (Perdaman) has signed a licensing and engineering contract for Haldor Topsoe's SynCOR Ammonia solution for its A$ 4 billion ammonia/urea plant in Karratha, Western Australia. Stamicarbon has been chosen as urea licensor, and gas supply has been secured.  The next milestone project was expected toward the end of March 2020. Perdaman Chemicals and Fertilisers has signed a binding Heads of Agreement with SNC-Lavalin for the EPC work for its Urea Project in Western Australia.


Please remove this section March 2020 has gone before 16 months. MOU is not actual production or an actual plant

Byproducts & Shortages due to shutdowns

One of the main industrial byproducts of ammonia production is CO2. In 2018, high oil prices resulted in an extended summer shutdown of European ammonia factories causing a commercial CO2 shortage, thus limiting production of carbonated drinks such as beer and fizzy soft drinks.[15] This situation repeated in September 2021 due to a 250-400% increase in the wholesale price of natural gas over the course of the year.[16][17]

See also

References

  1. ^ United States Geological Survey publication
  2. ^ Twygg, Martyn V. (1989). Catalyst Handbook (2nd ed.). Oxford University Press. ISBN 978-1-874545-36-1.
  3. ^ "Iceland launches energy revolution". BBC News. 2001-12-24. Archived from the original on 7 April 2008. Retrieved 2008-03-23.
  4. ^ Bradley, David (2004-02-06). "A Great Potential: The Great Lakes as a Regional Renewable Energy Source" (PDF). Archived from the original (PDF) on 29 October 2008. Retrieved 2008-10-04.
  5. ^ Karl Fisher; William E. Newton (2002). G. J. Leigh (ed.). Nitrogen fixation at the millennium. Elsevier. pp. 2–3. ISBN 978-0-444-50965-9.
  6. ^ "StackPath".
  7. ^ Huang, Jianyin; Kankanamge, Nadeeka Rathnayake; Chow, Christopher; Welsh, David T.; Li, Tianling; Teasdale, Peter R. (January 2018). "Removing ammonium from water and wastewater using cost-effective adsorbents: A review". Journal of Environmental Sciences. 63: 174–197. doi:10.1016/j.jes.2017.09.009. PMID 29406102.
  8. ^ Muthuvel, Madhivanan; Botte, Gerardine G (2009). "Trends in Ammonia Electrolysis". Modern Aspects of Electrochemistry, No. 45. Modern Aspects of Electrochemistry. Vol. 45. pp. 207–245. doi:10.1007/978-1-4419-0655-7_4. ISBN 978-1-4419-0654-0.
  9. ^ Gwak, Jieun; Choun, Myounghoon; Lee, Jaeyoung (February 2016). "Alkaline Ammonia Electrolysis on Electrodeposited Platinum for Controllable Hydrogen Production". ChemSusChem. 9 (4): 403–408. doi:10.1002/cssc.201501046. PMID 26530809.
  10. ^ Lin, P.; Wang, R.Z.; Xia, Z.Z.; Ma, Q. (June 2011). "Ammonia–water absorption cycle: a prospective way to transport low-grade heat energy over long distance". International Journal of Low-Carbon Technologies. 6 (2): 125–133. doi:10.1093/ijlct/ctq053.
  11. ^ Shokati, Naser; Khanahmadzadeh, Salah (August 2018). "The effect of different combinations of ammonia-water Rankine and absorption refrigeration cycles on the exergoeconomic performance of the cogeneration cycle". Applied Thermal Engineering. 141: 1141–1160. doi:10.1016/j.applthermaleng.2018.06.052.
  12. ^ "Introduction to Ammonia Production". www.aiche.org. 2016-09-08. Retrieved 2021-08-19.
  13. ^ "Introduction to Ammonia Production". www.aiche.org. 2016-09-08. Retrieved 2021-08-19.
  14. ^ "Home". Welcome to Perdaman. Retrieved 2021-08-20.
  15. ^ "This is exactly why we're running out of CO2 for beer and meat production". iNews. 2018-06-28.
  16. ^ "Why is there a CO2 shortage and how will it hit food supplies?". BBC News. 2021-09-20. Retrieved 2021-09-21.
  17. ^ "Gas crisis: No chance lights will go out, says government". BBC News. 2021-09-20. Retrieved 2021-09-21.
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Ammonia_production&oldid=1048098535"