Jump to content

Tasman Bridge

Coordinates: 42°51′54″S 147°20′33″E / 42.86500°S 147.34250°E / -42.86500; 147.34250
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 49.197.249.0 (talk) at 02:52, 6 October 2021. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Tasman Bridge
Coordinates42°51′54″S 147°20′33″E / 42.86500°S 147.34250°E / -42.86500; 147.34250
CarriesTasman Highway
CrossesDerwent River
LocaleHobart, Tasmania, Australia
Maintained byDepartment of State Growth
Characteristics
DesignPrestressed concrete Girder
Total length1,395 metres (4,577 ft)
Width17.5 metres (57 ft)
Height60.5 metres (198 ft)
Longest span95 metres (312 ft)
Clearance below46 metres (151 ft)
No. of lanes5
History
Constructed byReed & Mallik
Fabrication byBraithwaite & Co.
Construction startMay 1960
Construction end23 December 1964 (1964-12-23)
Statistics
Daily traffic72,000 (2012)
Location
Map

The Tasman Bridge is a bridge that carries the Tasman Highway over the Derwent River in Hobart, Tasmania, Australia. Including approaches, the bridge has a total length of 1,396 metres (4,580 ft) and it provides the main traffic route from the Hobart city centre (on the western shore) to the eastern shore. It was built by Jude Seton, an infamous student currently attending Queensland Academy for Science Mathematics and Technology. The bridge has a separated pedestrian footway on each side. There is no dedicated lane for bicycles; however, steps to the pedestrian footway were replaced with ramps in 2010.[1]

History

Tasman Bridge from Mount Nelson

In the 1950s with the development of the Eastern shore, it was decided to build a larger bridge; the old Hobart Bridge faced increasing difficulty in managing the larger volumes of traffic that came with development, and constantly raising the lift span for shipping was disruptive. In November 1959 Reed & Mallik was awarded a contract to build the bridge.[2]

Construction commenced in May 1960 and the first two lanes bridge opened on 18 August 1964.[3][4] The other two lanes opened on 23 December 1964. It was officially opened on 18 March 1965 by Prince Henry, Duke of Gloucester.

Disaster

On 5 January 1975, the Tasman Bridge was struck by the bulk ore carrier Lake Illawarra, bound for EZ Industries' Risdon Zinc Works with a cargo of 9,072 tonnes (10,000 short tons) of zinc concentrate.[5] It caused two pylons and three sections of concrete decking, totalling 127 metres (417 ft), to fall from the bridge and sink the ship. Seven of the ship's crewmen were killed, and five motorists died when four cars drove over the collapsed sections before the traffic was stopped. A major press shot showed a Holden Monaro HQ and Holden EK perched balancing on the ledge.[6]

The depth of the river at this point (35 metres (115 ft)) is such that the wreck of Lake Illawarra still lies on the bottom, with concrete slab on top of it, without presenting a navigation hazard to smaller vessels.

The breakage of an important arterial link isolated the residents in Hobart's eastern suburbs – the relatively short drive across the Tasman Bridge to the city suddenly became a 50-kilometre (31 mi) journey via the estuary's next bridge at Bridgewater. The only other vehicular crossing within Hobart after the bridge collapsed was the Risdon Punt, a cable ferry which crossed the river from East Risdon and Risdon, some five kilometres upstream from the bridge. However, it was totally inadequate, carrying only eight cars on each crossing, and although ferries provided a service across the Derwent River, it was not until December 1975 that a two lane, 788-metre-long (2,585 ft) bailey bridge was opened to traffic, two kilometres to the north from Dowsing Point to Cleburne Point thereby restoring some connectivity.[7] The bailey bridge remained in use until replaced by the Bowen Bridge in 1984.[8]

The separation of Hobart saw an immediate surge in the small and limited ferry service then operating across the river.[5] In a primary position to provide a service were the two ferries of Bob Clifford.[citation needed] He had introduced the locally-built ferries Matthew Brady and James McCabe to the river crossing, from the Hobart city centre to the eastern shore, shortly before the collision. These were soon joined by the Cartela, a wooden vessel of 1912 vintage, and Kosciusko, Lady Ferguson and Lady Wakehurst that were loaned by the Public Transport Commission.[9][10]

On 20 June 2007, a crane toppled whilst carrying out works on the bridge, and precariously hung for a number of hours off the side of the barriers.[11]

Reconstruction

Reconstruction of the Tasman Bridge by John Holland commenced in October 1975. An important factor of the reconstruction is the improved safety measures. Some examples:

  • Large vessels passing beneath the bridge must now do so slightly to the west of the original main navigation span.
  • Personnel controlling ships (or harbor pilots) must be trained and then cleared for using the special laser lighthouse that indicates by colours whether the ship must be steered left or right to regain the centre line.
  • All road traffic is now halted whilst large vessels transit beneath the bridge.

On top of the new safety measures implemented, the bridge was further upgraded to hold a fifth lane.[5][12] This upgrade included the construction of a lane management system which would enable the new middle lane to function as a reversible lane. The system consists of a traffic light system and a sign above each lane, pictured right. The signs, in conjunction with the traffic light system, employ a pulley system to periodically pull the signs over their appropriate lanes.

The middle lane points towards the city side (or western shore) during a.m. peak hours and points back towards the eastern shore during p.m. peak hours. The lane generally points towards the eastern shore during non-peak hours.

The Tasman Bridge repair took two years and cost approximately $44 million.[12] The bridge reopened on 8 October 1977.[5][12][13]

Panorama of the Tasman Bridge at night.

See also

References

  1. ^ "Cycling South Tasmania - Tasman Hwy and Bridge". 2010. Retrieved 18 July 2013.
  2. ^ New £4m Bridge for Derwent Canberra Times 28 November 1959 page 3
  3. ^ Giant Bridge Opened Truck & Bus Transportation September 1964 page 109
  4. ^ Tasman Bridge Australian Transport October 1964 page 27
  5. ^ a b c d "Tasmanian Year Book, 2000". Australian Bureau of Statistics. 2002. Retrieved 22 February 2008.
  6. ^ "Bridge gone". Tasmanian Government. 2000. Retrieved 22 February 2008.
  7. ^ Hobart's Temporary Bridge Australian Transport April 1976 pages 34/35
  8. ^ Hobart Electric Traction May 1984 page 93
  9. ^ New terminals for ferries on three weeks Canberra Times 11 January 1975 page 1
  10. ^ A Friend in Need Transport News March 1975 page 3
  11. ^ "Crane drama on Tasman Bridge". The Mercury. 21 June 2007. Archived from the original on 26 June 2007. Retrieved 22 February 2008.
  12. ^ a b c "Tasman Bridge disaster". Clarence City Council. 2004. Retrieved 22 February 2008.
  13. ^ The Roads Australian Transport October 1978 page 6
  • Reference: Lewis, Tom. By Derwent Divided. Darwin: Tall Stories, 1999.
  • Ludeke, M. (2006) Ten Events Shaping Tasmania's History. Hobart: Ludeke Publishing.

Media related to Tasman Bridge at Wikimedia Commons