Jump to content

VPX

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by W Nowicki (talk | contribs) at 22:29, 3 November 2021 (a couple more dates for historical context). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

6U VPX Video Output Module form Wolf company on DSEI-2019
3U VPX module

VPX, also known as VITA 46, refers to a set of standards for connecting components of a computer (known as a computer bus), commonly used by defense contractors. Some are ANSI standards such as ANSI/VITA 46.0–2019. VPX provides VMEbus-based systems with support for switched fabrics over a new high speed connector. Defined by the VMEbus International Trade Association (VITA) working group starting in 2003, it was first demonstrated in 2004, and became an ANSI standard in 2007.[1]

History

the VMEbus International Trade Association (VITA) working group, formed in March 2003, was composed of companies such as ADLINK, Boeing, Curtiss-Wright, Elma Electronic, GE Intelligent Platforms, Kontron, Mercury Computer Systems, and Northrop Grumman, it was designed with defense applications in mind, with an enhanced module standard that enables applications and platforms with superior performance. VPX retains VME's existing 6U and 3U Eurocard form factors, supporting existing PCI Mezzanine Card (PMC) and XMC mezzanines (PMC with high-speed serial fabric interconnect), and maintaining the maximum possible compatibility with VMEbus.

New generations of embedded systems based on the VPX standard reflect the growing significance of high speed serial switched fabric interconnects such as PCI Express, RapidIO, Infiniband and 10 Gigabit Ethernet. These technologies are replacing traditional parallel communications bus architectures for local communications, because they offer significantly greater capability. Switched fabrics technology supports the implementation of multiprocessing systems that require the fastest possible communications between multiple processors (e.g., digital signal processing applications). VPX gives the large existing base of VMEbus users access to these switched fabrics.

VPX technology was presented at a VMEbus International Trade Association (VITA) trade show in 2004.

VPX was intended to address shortcomings in scalability and performance of on both side of the bus to bus bridging technology. The goal was to include the newer faster VMEbus standards and on the local bus side to include the new generation of PCI bus standards. VPX computer bus standard - V -VME and P -PCI and X the extents for both buses standards.

Technologies in VPX include:

  • Both 3U and 6U formats
  • New 7-row high speed connector rated up to 6.25 Gbit/s
  • Choice of high speed serial fabrics
  • PMC, FMC (VITA 57), and XMC (VITA 42) mezzanines
  • Hybrid backplanes to accommodate VME64, VME320 VXS, and VPX boards
  • VPX - bus to bus bridges

The standard was updated in 2013 and 2019.[2]

Specification

In common with other similar standards, VPX comprises a "base line" specification, which defines the basic mechanical and electrical elements of VPX, together with a series of "dot level" specifications, one or more of which must be implemented to create a functional module. The specifications and their status[when?] are:

Basic module
VITA 46.0 VPX Base Standard - ANSI ratified
VITA 46.1 VMEbus Signal Mapping on VPX - ANSI ratified
VITA 46.3 Serial RapidIO(tm) on VPX Fabric Connector - ANSI ratified
VITA 46.4 PCI Express on VPX Fabric Connector - ANSI ratified
VITA 46.6 Gigabit Ethernet Control Plane on VPX - ANSI ratified
VITA 46.7 Ethernet on VPX Fabric Connector - ANSI ratified
VITA 46.9 PMC/XMC/Ethernet Signal Mapping to 3U/6U on VPX - draft
VITA 46.10 Rear transition module on VPX - draft
VITA 46.11 System Management on VPX - draft
VITA 46.12 Fiber Optic Interface on VPX - Now VITA 66
VITA 46.13 Fibre channel on VPX - planned
VITA 46.20 Switch slot definition on VPX - draft
VITA 46.21 Distributed switching topologies - draft

Connector

The single biggest difference between original VMEbus boards and VPX boards is a new connector, developed by Tyco Electronics and known as the MultiGig RT2. VPX boards cannot be used in a standard VMEbus chassis, although the use of hybrid chassis is foreseen by the VPX standard. A 6U VPX board features six 16-column 7-row RT2 connectors and one 8-column 7-row RT2 connector, while a 3U board features two 16-column 7-row RT2 connectors and one 8-column 7-row RT2 connector.

Also new for VPX boards are alignment/keying blocks which are designed to be sufficiently robust to prevent pin stubbing. The blocks also provide card keying and a safety ground. A 6U board has three such keying blocks, while a 3U board has two.

The MultiGig RT2 connector is specifically designed to enable high performance. It accomplishes this through a 7-row 16-wafer (wafers can be power, differential or single-ended) that delivers highly controlled impedance, minimal insertion loss and less than 3% crosstalk at transfer rates up to 6.25 Gbit/s. The new connector enables a 6U VPX board to feature a total of 707 non-power electrical contacts and a total of 464 signal contacts. The latter are usable as:

  • 64 signals implemented as 32 high speed differential pairs for core fabric
  • 104 VME64 signals
  • 268 for user I/O including 128 high speed differential pairs (giving a total of 160 high speed differential pairs)
  • 28 for system utilities or spares

The connector is designed to allow a typical stiffening bar and a standard length PMC.

Power and ruggedization

A VMEbus slot is limited to a maximum of 90 watts at 5 volts. VPX raised this to 115 watts at the same voltage, or up to 384 watts at 12 volts or 768 watts at 48 volts. The specification of 6U VPX calls for computer cooling via a conduction-cooled envelope compliant with the IEEE standard IEEE-1101.2, which is compatible with existing enclosures. Provision is also made for air-cooling via an IEEE 1101.1/10 form factor version.

For more stringent cooling requirements, the REDI (Ruggedized Enhanced Design Implementation – previously known as VITA 48) standard describes how to implement layout techniques to better support cooling methodologies on specific form factors. This provides a specification not only for ESD metal covers on two sides of VPX boards, but also for forced air, conduction- and liquid-cooling implementations. REDI also addresses spray cooling. To allow for greater power and heat dissipation, REDI includes provision for increased board-to-board spacing and increased board thickness.

Products and OpenVPX

Manufacturers[who?] announced products based on the VPX standard, in both 3U and 6U form factors. These include single-board computers (based on both Intel and PowerPC architectures), multiprocessors, graphics processors, FPGA-based processing modules, mass storage, switches, and complete integrated subsystems.

The OpenVPX working group was formed in January 2009 to develop a system-level specification that addressed interoperability improvements for VPX. Three years after being called a "standard", most VPX products still had to have all components supplied by a single source.[3] In October, 2009, the specification was submitted as VITA 65, and in December 2009, the 28 member companies formed an alliance for marketing their products.[4]

The OpenVPX System Specification describes the technical implementation details for 3U and 6U VPX payload and switch modules, backplane topologies, and chassis products, which provides clear guidance on how to build interoperable computing and communication platforms. OpenVPX was a development of, and complementary to, VPX. The OpenVPX System Specification was ratified by ANSI in June 2010.

See also

References

  1. ^ "VITA's VPX embedded systems computing standard gets ANSI ratification". Press release. November 5, 2007. Archived from the original on May 4, 2012. Retrieved November 3, 2021.
  2. ^ "ANSI and VITA Ratify ANSI/VITA 46.0-2019 VPX Baseline Standard". Press release. October 2, 2018. Retrieved November 3, 2021.
  3. ^ Chris A. Ciufo (October 18, 2009). "Extra! OpenVPX goes from conflict to collaboration". VITA Technologies blog. Retrieved November 3, 2021.
  4. ^ "VITA Members Form VPX Marketing Alliance". Press release. December 10, 2009. Archived from the original on September 7, 2010. Retrieved November 3, 2021.
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=VPX&oldid=1053441386"