Color mixing

There are three types of color mixing: additive, subtractive, and average. In first two cases, mixing is typically described in terms of three primary colors and three secondary colors (colors made by mixing two of the three primary colors in equal amounts). All subtractive colors combined in equal amounts make dark brown, while all additive colors combined in equal amounts make white.

Additive mixing

The additive mixing of colors is not commonly taught to children, as it does not correspond to the mixing of physical substances (such as paint) which would correspond to subtractive mixing. Two beams of light that are superimposed mix their colors additively.

By convention, the three primary colors in additive mixing are red, green, and blue. In the absence of light of any color, the result is black. If all three primary colors of light are mixed in equal proportions, the result is neutral (gray or white). When the red and green lights mix, the result is yellow. When green and blue lights mix, the result is a blue. When the blue and red lights mix, the result is magenta.

Red-green–blue additive mixing is used in television and computer blur^{[disambiguation needed]} display unit|monitors]], including smartphone displays, to produce a wide range of colors. A screen real^{[disambiguation needed]} uses a juxtaposition of these three primary colors. Projection televisions sometimes have three projectors, one for each primary color.

Subtractive mixing

A simulated example of (idealized) subtractive color mixing. An external source of illumination is assumed, and each primary attenuates (absorbs) some of that light. The standard subtractive primaries cyan, magenta, and yellow combine pairwise to make subtractive secondaries red, green, and blue (which are additive primaries, or in practice somewhat darker and less-saturated versions of typical additive primaries). Combining all three primaries (center) absorbs all the light, resulting in black. For real pigments, the results would be somewhat complicated by opacity and mixing behavior, and in practice adding a fourth pigment such as black may be helpful.

The mixing of colored physical substances corresponds to subtractive color mixing, hence it corresponds to our intuition about mixing colors. To explain the mechanism, consider mixing red paint with yellow paint. The red paint is red because when the ambient light strikes it, the composition of the material is such that it absorbs all other colors in the visible spectrum except for red. The red light, not being absorbed, reflects off the paint, and is what we see. This same mechanism describes the color of material objects – note that light is not a material object – and so applies to the yellow paint as well. Making recourse to the figure above demonstrating additive color mixing, one sees that yellow light is composed of an (additive) mixture of red and green light. When we mix the two paints, the resulting substance has red paint and yellow paint. The yellow paint absorbs all colors except for red and green. However, the red paint will absorb the green reflected by the yellow paint. The red paint can be said to subtract the green from the yellow paint. The resulting paint reflects only red light and so appears red to our eyes. Note however that this description is theoretical and that the mixing of pigments does not correspond to ideal subtractive color mixing because some light from the subtracted color is still being reflected by one component of the original paint. This results in a darker and desaturated color compared to the color that would be achieved with ideal filters.

The three primary colors typically used in subtractive color mixing systems are cyan, magenta, and yellow, corresponding to the CMY color model and CMYK color model widely used in color printing. In subtractive mixing of color, the absence of color is white and the presence of all three primary colors makes a neutral dark gray or black. The secondary colors are the same as the primary colors from additive mixing and vice versa. Subtractive mixing is used to create a variety of colors when printing or painting on paper or other white substrates, by combining a small number of ink or paint colors. Red is created by mixing magenta and yellow (removing green and blue). Green is created by mixing cyan and yellow (removing red and blue respectively). Blue is created by mixing cyan and magenta (removing red and green). Black can be approximated by mixing cyan, magenta, and yellow, although real pigments are not ideal and so pure black is nearly impossible to achieve.

Average mixing

Average mixing is about getting an average color out of two colors. For example, black and white averages to gray, and blue and red averages to purple. It's different from additive mixing since additive would mean resulting color is lighter than colors that are being mixed, while average mixing would result in average brightness, and is different from subtractive since subtractive would mean resulting color would be darker than colors that are being mixed. In this case, there are 8 primary colors, white, cyan, [[magenta], yellow, red, green, blue, and black.

One example of average mixing is when there are different colors on the disk, that would result in a mixed color when disk spins fast enough.

References

Macaulay, David and Neil Ardley (1988). The New Way Things Work. London: Dorling Kindersley Ltd. ISBN 0-395-93847-3.

Additive mixing

Subtractive mixing

Average mixing

See also

References