Jump to content

Grand Trunk Western 4070

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Railroad Street (talk | contribs) at 04:48, 27 March 2022. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Grand Trunk Western 4070
GTW 4070 at Boston Mills Road in Boston Mills, Ohio
Type and origin
Power typeSteam
BuilderAmerican Locomotive Company (ALCO)
Order numberS 1259
Serial number60319
ModelS3a
Build dateDecember 1918
Specifications
Configuration:
​
 • Whyte2-8-2
 • UIC1’D1
Gauge4 ft 8+1⁄2 in (1,435 mm)
Driver dia.63 in (1,600 mm)
Wheelbase71.45 ft (21.78 m) ​
 • Engine36.08 ft (11.00 m)
 • Drivers16.75 ft (5.11 m)
Adhesive weight231,000 lb (105,000 kg)
Loco weight306,500 lb (139,000 kg)
Tender weight187,500 lb (85,000 kg)
Total weight494,000 lb (224,000 kg)
Fuel typeCoal
Fuel capacity16 t (16 long tons; 18 short tons) (S3a)
18 t (18 long tons; 20 short tons) (S3c)
Water cap.10,000 US gal (38,000 L; 8,300 imp gal) (S3a)
12,000 US gal (45,000 L; 10,000 imp gal) (S3c)
Firebox:​
 • Grate area66.7 sq ft (6.20 m2)
Boiler pressure200 psi (1.38 MPa)
Heating surface:​
 • Firebox259 sq ft (24.1 m2)
CylindersTwo, outside
Cylinder size26 in × 30 in (660 mm × 760 mm)
Performance figures
Maximum speed65 miles per hour (105 km/h)
Tractive effort54,724 lb (24,822 kg) = 55%
Factor of adh.4.23
Career
OperatorsGrand Trunk Western, Midwest Railway Preservation Society
ClassS-3-a locomotive, S-3-c tender
Numbers
  • GTR 474
  • GTW 3734
  • GTW 4070
  • CB&Q 4070
RetiredMarch 29, 1960 (revenue service)
1990 (excursion service)
Restored1968
Current ownerMidwest Railway Preservation Society, successor to Midwest Railway Historical Foundation
DispositionUndergoing restoration to operating condition by the Midwest Railway Preservation Society in Cleveland, Ohio

Grand Trunk Western No. 4070 is a class "S-3-a" 2-8-2 type USRA Light Mikado steam locomotive originally built by the American Locomotive Company (ALCO) in December 1918 for the Grand Trunk as No. 474, later re-numbered by Grand Trunk Western Railroad, after the GT was absorbed into Canadian National as GTW No. 3734. In the late 1950s the locomotive was given a larger tender, from an S-3-c, and re-numbered 4070. The locomotive has pulled passenger excursions in Illinois, Indiana, Ohio and Pennsylvania over the years.

History

Revenue service

Grand Trunk Western 4070 was built in December 1918 by the American Locomotive Company (ALCO) in Schenectady, New York and assigned to Grand Trunk, which numbered it originally as 474. Sometime in the 1930s a Coffin feedwater heater was installed, and with other improvements, the number was changed by the GTW to 3734. This steam locomotive's road career consisted of pulling freight and passenger services in Michigan. After falling into a turntable in June 1955,[1] the locomotive was shopped and given a larger tender, and the locomotive's number was changed to 4070. The 4070 continued to pull regular duty until March 29, 1960, when it pulled its final revenue freight, from Pontiac to Durand, MI and then was retired. In 1961, Lou Keller, a member of the National Railway Historical Society's Iowa chapter purchased 4070.[2] In 1966 the Midwest Railway Historical Foundation (now MRPS) acquired the locomotive on a five-year lease and was moved into storage under the Cleveland Union Terminal.[3][2] It was then moved to Chicago in 1967, where it was restored to operating condition by Richard Jensen and his crew, who also worked on fellow GTW USRA locomotive No. 5629.[4][5]

Life after the Grand Trunk

No. 4070 crossing the Cuyahoga River, 1975

4070 operated for the first time again on November 3, 1968, by pulling a passenger excursion from Dearborn Station, Chicago to South Bend, Ind. commemorating the 50th anniversary of her build date in 1918.[6] An additional excursion was also made from these two points on March 23, 1969.[7] On August 31, 1969, 4070 pulled a passenger fan trip from Erie to Greenville, Pennsylvania on the Bessemer and Lake Erie Railroad.[8] The 4070 was also used at Conneaut Lake Park in PA. In 1971, MRHF bought out the lease. In 1975 it was selected to be used on the newly created Cuyahoga Valley Line - now known as the Cuyahoga Valley Scenic Railroad. In 1977, the 4070 performed a doubleheader along the famed Horseshoe Curve with Reading T-1 4-8-4 "Northern" 2102.[9] However, that trip was plagued with mechanical issues; while on the curve, the 4070 threw an eccentric rod, and the busy Conrail line where their train sat had to be shut down for several hours. After the incident, Conrail banned steam operations for the next several years. The 4070 had its rods repaired and was brought back to pull passenger trains on the Cuyahoga Valley Line. Additionally, in 1983, the locomotive was painted as Chicago, Burlington and Quincy 4070, and run to South Dayton, NY, for filming in the movie The Natural, starring Robert Redford, and released in 1984. After the movie, it continued service on the CVL until encountering mechanical difficulties in 1990. Upon inspection, 4070 was found to be in need of repairs. Seeing that the cost of the repairs would be prohibitive, 4070 was once again retired from service.[10]

Second restoration

In 2011 the process started of restoring the locomotive to operational condition at the Midwest Railway Preservation Society[11] in Cleveland, Ohio. The locomotive boiler and tender have both been tested using ultrasound. The locomotive must have its drypipe, and front and rear tube sheets replaced. In addition, the smokebox, firebox, frame, running gear, driving boxes, tender and many assorted parts all need major work before 4070 can be operational. The estimated cost of 4070's restoration is $1,290,000.[12] As of 2022, the MRPS has re-organized their portion of the roundhouse for more suitable space to work on No. 4070, and they have seamed the crack the locomotive's frame has had from it's 1955 incident. It will likely be a few more years before the locomotive would be ready to steam up again.[13]

The engine made a special "guest appearance" in the 1984 movie The Natural, starring Robert Redford. The movie portion was filmed on the NY&LE railroad, in South Dayton, New York.

Other preserved 2-8-2s

References

  1. ^ Edmund (2016-08-04), 3734GTW_Pontiac_6-9-55, retrieved 2021-01-28
  2. ^ a b Murphey, Frances B. (May 22, 1966). "Iron 'Baby' Arrives - Railroad Buffs Now Have Whole Train". Akron Beacon Journal. p. 103. Retrieved March 27, 2022.
  3. ^ "Minutes of Meetings, Midwest Chapter-National Railway Historical Society," June 4, 1966
  4. ^ admin (2021-03-18). "A Passion for Steam". The Trackside Photographer. Retrieved 2021-05-10.
  5. ^ "Minutes of Meetings, Midwest Chapter-National Railway Historical Society," December 2, 1967
  6. ^ "Ernest Millers and Friends Take Anniversary Steam Excursion Trip Sunday". Marengo Republican-News. November 7, 1968. p. 22. Retrieved March 27, 2022.
  7. ^ "Railfan Enthusiasts". Vidette-Messenger of Porter County. March 25, 1969. p. 1. Retrieved March 27, 2022.
  8. ^ "Steam Railroad Excursion Reset". The News-Herald. August 21, 1969. p. 3. Retrieved March 27, 2022.
  9. ^ "RailPictures.Net Photo: AGY 2102 Allegheny Railroad Steam 4-8-4 at Derry, Pennsylvania by John Dziobko www.godfatherrails.com". www.railpictures.net. Retrieved 2021-01-14.
  10. ^ "Locomotives Being Restored". Steam Railroading.
  11. ^ "The Restoration of 4070". Midwest Railway Preservation Society. 2020-03-15. Retrieved 2021-01-15.
  12. ^ "Steam Locomotive 4070 being restored at Midwest Railway Preservation Society". Midwest Railway Preservation Society.
  13. ^ Grand Trunk Western 4070 Restoration June 2021 Update, retrieved 2021-06-12

"Evening Before The Diesel" by Charles R. Foss

  • [1] Steamlocomotive.com
Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Grand_Trunk_Western_4070&oldid=1079507242"