Jump to content

V-class ferry

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Llammakey (talk | contribs) at 22:14, 25 June 2022 (Undid revision 1094998221 by 2604:3D08:727A:AF00:DC48:4B5A:52EB:28E1 (talk) not in citations provided). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Queen of Vancouver in Active Pass in 2007
Class overview
NameV class (Victoria class)
OperatorsBC Ferries
Preceded bySidney class
Succeeded by
Subclasses
Built1962–1965
In service1962–present
Planned7
Completed7
Active2
Laid up1
Scrapped4

The V-class ferries, also known as the Victoria class, originally included seven ferries operated by BC Ferries built between 1962 and 1965. The V class were a continuation of the previous Sidney-class design with some cosmetic changes and different engines. These vessels were the backbone of service on the TsawwassenSwartz Bay route prior to the arrival of MV Spirit of British Columbia in 1993. Four of these vessels underwent vehicle capacity increases three times. The lead ship of the class, Queen of Victoria suffered significant damage in a collision in 1982.

The vessels began to be retired in 2000. Four vessels were to be retired and sold in 2008. The transfer of Queen of Esquimalt was halted and she was broken up in Ensenada, Mexico. Both Queen of Nanaimo and Queen of Burnaby were retired in 2017. Queen of New Westminster is still in service with BC Ferries. Queen of Nanaimo was sold to a ferry company in Fiji and remains in service there.

Background

In 1958, the premier of British Columbia W.A.C. Bennett authorised the creation of a provincial ferry service.[1] The new service, known as the British Columbia Ferry Corporation ordered two ships constructed from shipyards in British Columbia which became the Sidney-class ferries.[2] The initial success of the first two led BC Ferries to order a further two new ships similar to the Sidney class, but with modifications based on lessons learned from the first two ships. The new ships would be also be designed by the naval architect Philip F. Spaulding and his Canadian partner Arthur McLaren but this time, BC Ferries would purchase the plans for the ships and not have to pay royalty payments.[3] Ordered in 1961, the two new ships were initially named City of Victoria and City of Vancouver.[4] The vessels were renamed to Queen of Victoria and Queen of Vancouver due to a change in fleetwide naming policy based on CP Ships naming their vessels "Princess". As a result, the larger vessels of the British Columbia Ferries fleet would have "Queen" placed in front of their original names and the smaller ones have it added to the end. The V class were intended to replace the ships BC Ferries had received from the Black Ball Line during its creation.[5]

Ships in class

Construction data
Name Builder Launched Completed Fate
Queen of Victoria (ex-City of Victoria) Victoria Machinery Depot, Victoria, British Columbia[6] 24 October 1961[7] February 1962[7] sold 2001, renamed Queen of Ocoa, then Aan, scrapped 2006[7]
Queen of Vancouver (ex-City of Vancouver) Burrard Dry Dock, North Vancouver, British Columbia[8] 16 January 1962[9] April 1962[9] Broken up for scrap 2012[9]
Queen of Saanich Victoria Machinery Depot, Victoria[10] 28 November 1962[11] February 1963[11] Broken up for scrap 2012[11]
Queen of Esquimalt 22 January 1963[12] March 1963[12] Sold 2010, renamed Princess Jacqueline, broken up 2011[12]
Queen of Nanaimo 3 December 1963[13] June 1964[13] Sold 2017, renamed Lomaiviti Princess V[13]
Queen of New Westminster 12 May 1964[14] July 1964[14] Active
Queen of Burnaby 15 February 1965[15] May 1965[15] Sold 1994, renamed Royal Victorian, then Princess Marguerite III, reacquired 2000 and regained original name[15]

Description

Queen of Victoria in 1964, showing how the V-class ferries looked as first built

As originally built, the vessels were of similar designs but with different engines.[16] The ships of the class were built in three batches. The first two (Queen of Victoria and Queen of Vancouver measured 104.3 metres (342 ft 2 in) long overall and 93.8 m (307 ft 9 in) between perpendiculars with a beam of 24 m (78 ft 9 in). They were assessed at 3,541 gross register tons (GRT).[7][9] They were powered by twin Paxman diesel engines giving the vessels a maximum speed of 18 knots (33 km/h; 21 mph). The Paxman engines were cheaper to acquire than the Mirlees diesels in the preceding Sidney class.[16] The first batch had a 106-car capacity and mainly cosmetic differences from the Sidney class, though the class was designed with future expansion in mind.[4]

Queen of Saanich

The next batch of Queen of Saanich and Queen of Esquimalt had a length overall of 104.2 m (341 ft 10 in) and 94 m (308 ft 5 in) between perpendiculars with a beam of 23.9 m (78 ft 5 in) and were assessed at 3,547 GRT.[11][12] The Paxman engines in the first batch had proved to be problematic, so BC Ferries had Fairbanks-Morse diesel engines installed in these two with no difference in speed.[16] The second batch had an original car capacity of 145 and could transport 1,000 passengers.[17]

The final batch of three, Queen of Burnaby, Queen of Nanaimo and Queen of New Westminster returned to the Mirless diesels of the Sidney class as the Fairbanks-Morse engines turned out to be just as problematic as the Paxmans.[16] The third batch ships measured 104.4 m (342 ft 6 in) overall, 93.8 m (307 ft 9 in) between perpendiculars with a beam of 23.9 m (78 ft 5 in). Queen of Nanaimo was initially assessed at 3,545 GRT Queen of New Westminster at 3,544 GRT and Queen of Burnaby at 3,542 GRT.[13][14][15]

Modifications

A drawing showing what Queen of Vancouver looked like when she was built (bottom), after being stretched (center), and after the upper car deck was added (top).

The seven ships were modified twice in quick succession to increase vehicle capacity. The first refit was the installation of ramps and platform car decks in 1968 that increased car capacity in 1968.[4] The second beginning in 1971 saw the ships sliced in half vertically across the beam for the insertion of a new 25.6-metre (84 ft) midsection, which dramatically increased their capacity. Beyond increasing the length of the ships, a new deluxe restaurant was added seating 48 persons, a 190-seat self-service cafeteria was installed, carpets and wall paneling and an open solarium was to the boat deck. The new midsections were pre-constructed to limit the time the ferries were out of service, turning it into a roughly three-month refit.[18] During the refit, 129 hydraulic jacks were welded into place and were used to open the ship up for the midsections to be slid into place.[19]

The first batch now had capacity for 192 cars and 1,250 passengers. They measured 120 m (395 ft) registered and 129.95 m (426 ft 4 in) long overall with a 23.95 m (78 ft 7 in) beam and a draught of 4.0 m (13 ft) and were assessed at 4,901 GRT, 3,321 net register tons (NRT) for Queen of Vancouver and 4,900 GRT and 3,314 NRT for Queen of Victoria. Their Paxman twin diesels created 4,969 kilowatts (6,664 horsepower) and a speed of 18 knots. They had a crew of 55.[20] The second batch had the same capacity but measured 120 m (394 ft) registered and 130 m (426 ft) long overall with a 22.73 m (74 ft 7 in) beam and a 4.0 m draught. Their Fairbanks-Morse diesels created 4,800 kW (6,400 hp) and they retained their 18-knot speed. They were assessed at 4,907 GRT, 3,324.84 NRT for Queen of Saanich, and 4,890 GRT, 3,317 NRT for Queen of Esquimalt.[21] The third batch's Mirlees diesels created 4,500 kW (6,000 hp) and the ships varied in size, with all ships retaining the 4.0 m draught, and similar capacity with the first two batches. Queen of Burnaby now measured 121.44 m (398 ft 5 in) registered and 130 m (426 ft) long overall with a beam of 78 ft 7+12 in (23.965 m) and assessed at 4,890 GRT and 3,346 NRT.[22] Queen of New Westminster measured 120 m (394 ft) registered with the same length overall and beam as Queen of Burnaby, but was assessed at 4,904 GRT and 3,341 NRT.[23].[a]

Beginning in 1981, the first four of the seven ships were cut horizontally from bow to stern to have a new vehicle deck inserted. These rebuilt ships retained the V-class designation. Car capacity increased to 400 for Queen of Esquimalt and Queen of Saanich, while Queen of Vancouver and Queen of Victoria increased to 284, as they retained extra room for overheight vehicles. During this refit, the ships all received new MaK diesel engines to replace the problematic Paxman and Fairbanks-Morse models.[24]

MV Queen of Nanaimo

Queen of Burnaby and Queen of Nanaimo were two original ships without the new car deck; they received a new designation as Burnaby-class vessels.[4] Queen of New Westminster was lifted in 1991 and was fit with new Wartsila 9R-32D diesel engines to travel at 20 knots (37 km/h; 23 mph) comparable to the newer C-class ferries.[25] The engines create 3,375 kW (4,526 hp) each[25] for a total of 13,500 kW (18,100 hp).[26] She had a major refit of her passenger areas completed in 2009, preparing her for another ten to fifteen years of service.[27] The vessel measures 129.9 m (426 ft 2 in) with a beam of 23.9 m (78 ft 5 in), has a passenger and crew capacity of 1,332 and a car capacity of 254.[26]

Service history

Queen of Vancouver
Queen of Esquimalt in Howe Sound, sailing from Langdale to Horseshoe Bay
Queen of Victoria

Queen of Vancouver and Queen of Victoria entered service in 1962. They were followed by Queen of Saanich and Queen of Esquimalt. The vessels served on the TsawwassenSwartz Bay route.[28] Queen of Nanaimo, Queen of New Westminster and Queen of Burnaby were the last to enter service and operated on the Departure BayHorseshoe Bay route.[29] Queen of New Westminster remains in service.[26]

On 2 August 1970, Queen of Victoria was in transit through Active Pass with 626 passengers when the ferry was struck by the Soviet freighter Sergey Yesenin. Three passengers were killed in the incident and Queen of Victoria suffered significant damage, with the Soviet ship suffering minor damage. The results of the investigation found that the pilot aboard Sergey Yesenin was mainly at fault, though the master of Queen of Victoria was not spared blame.[30] Queen of Victoria was towed back to port.[31]

In 1992, while Queen of Vancouver was loading passengers and vehicles at Departure Bay, a van was directed to stop on the apron of the shore loading ramp to the upper deck of the ship. While the van was stopped, the ship began to depart, leaving the apron without support and causing the van to fall first onto Queen of Vancouver's deck and then into the water. Three people died in the incident, with three survivors (one suffering serious injury). BC Ferries was later found to be at fault in the following investigation.[25]

In 1994 Queen of Burnaby was transferred to the Victorian Line and renamed Royal Victorian. In 1997, the ship was renamed Princess Marguerite III in 1997 before returning to BC Ferries ownership in 2000. Upon return to the BC Ferries fleet, the ship resumed using her initial name.[15]

Queen of Victoria was the first to be retired in 2001. The ship was sold to R & G Importadora & Exportadora of the Dominican Republic. and renamed Queen of Ocoa. Queen of Ocoa was scrapped in 2006 at Alang, India.[32]

Queen of Esquimalt was retired on 25 May 2008. The vessel was sold to Dalian Golden Sun I/E Co., Ltd. and docked in Port Alberni and renamed Princess Jacqueline. The ship was intended for further service in China, but Princess Jacqueline never left British Columbia waters and the sale was eventually halted due to court action.[33] In 2011 the vessel was scrapped at Ensenada, Mexico.[34]

Queen of Saanich was retired on 18 November 2008 and sold. The vessel was renamed Owen Bell and used as a logging camp on the coast of the Vancouver Island. The ship was later moved to be moored on the west side of Anvil Island in Howe Sound. Owen Bell was scrapped in 2012 at Ensenada, Mexico.[35] Queen of Vancouver was the next to be taken out of service on 15 April 2009. The ferry was sold to Coast Marine and moored at Woodfibre until 2012. The ship was then sent for scrapping at Ensenada, Mexico.[34]

Queen of Burnaby was retired in May 2017 (replaced by MV Salish Orca)[36] and Queen of Nanaimo was retired in September 2017 (replaced by MV Salish Eagle).[37] Queen of Nanaimo was sold to Goundar Shipping Ltd. of Fiji for service in the island nation. The ship was renamed Lomaiviti Princess V and services Savusavu and Kadavu Island.[38][39] Queen of Burnaby was no longer fit for sailing and was sold in 2018 on the condition that it be kept moored or scrapped.[40] However, the sale was not finalized and the vessel remains in Union Bay, British Columbia.[41]

Notes

  1. ^ Favelle does not have data for Queen of Nanaimo as the ship's refit was not completed at the time of publishing but the author states that the vessel had similar characteristics with the other ships of the third batch.[17]

Citations

  1. ^ Bannerman & Bannerman 1985, p. 30.
  2. ^ Bannerman & Bannerman 1985, p. 54.
  3. ^ Bannerman & Bannerman 1985, p. 55.
  4. ^ a b c d Bannerman & Bannerman 1985, p. 171.
  5. ^ Bannerman & Bannerman 1985, p. 73.
  6. ^ Favelle 1974, p. 7.
  7. ^ a b c d Queen of Victoria.
  8. ^ Favelle 1974, p. 5.
  9. ^ a b c d Queen of Vancouver.
  10. ^ Favelle 1974, pp. 3, 9, 11, 13, 15.
  11. ^ a b c d Queen of Saanich.
  12. ^ a b c d Queen of Esquimalt.
  13. ^ a b c d Queen of Nanaimo.
  14. ^ a b c Queen of New Westminster.
  15. ^ a b c d e Queen of Burnaby.
  16. ^ a b c d Bannerman & Bannerman 1985, p. 75.
  17. ^ a b Favelle 1974, p. 11.
  18. ^ Favelle 1974, p. 49.
  19. ^ Bannerman & Bannerman 1985, p. 82.
  20. ^ Favelle 1974, pp. 5, 7.
  21. ^ Favelle 1974, pp. 3, 9.
  22. ^ Favelle 1974, p. 15.
  23. ^ Favelle 1974, p. 13.
  24. ^ Bannerman & Bannerman 1985, pp. 78, 82.
  25. ^ a b c "Marine Investigation Report M92W1057". Transportation Safety Board of Canada. Retrieved 19 February 2022.
  26. ^ a b c "Queen of New Westminster". BC Ferries. Retrieved 19 February 2022.
  27. ^ Knox, Jack (9 August 2013). "Jack Knox: The refitting of B.C. Ferries". Times Colonist. Retrieved 19 February 2022.
  28. ^ Favelle 1974, pp. 3, 5, 7, 9.
  29. ^ Favelle 1974, pp. 11, 13, 15.
  30. ^ Bannerman & Bannerman 1985, p. 109.
  31. ^ Judd, Amy (2 August 2020). "'There was no warning': How a collision with a Russian freighter 50 years ago nearly cut a B.C. ferry in half". Global News. Retrieved 19 February 2022.
  32. ^ "Aging Queen of Esquimalt ferry sold to buyer in China". Vancouver Sun. Archived from the original on 3 March 2016. Retrieved 18 January 2019 – via canada.com.
  33. ^ "Former Queen of Esquimalt Leaves Canada For Mexico". maritimematters.com. 3 June 2011. Archived from the original on 10 June 2011. Retrieved 18 January 2019.
  34. ^ a b "Aging ferry floating off Fanny Bay will be scrapped in Mexico". Comox Valley Record. 26 July 2012. Archived from the original on 19 September 2016. Retrieved 18 January 2019.
  35. ^ Gleeson, John (29 September 2012). "Retired ferry towed to Mexico". Coast Reporter. Archived from the original on 21 February 2013.
  36. ^ Thomas, Megan (22 November 2016). "New Salish Orca ferry en route to B.C." CBC News. Retrieved 7 September 2020.
  37. ^ Chan, Kenneth (21 June 2017). "New BC Ferries vessel begins service between Tsawwassen and Gulf Islands". Daily Hive. Venture Vancouver. Retrieved 7 September 2020.
  38. ^ Penner, Derrick (22 November 2017). "Queen of Nanaimo becomes third BC Ferries ship given new life in Fiji". Vancouver Sun. Retrieved 18 January 2019.
  39. ^ Ratucadra, Caroline (15 November 2017). "MV Lomaiviti Princess V On Her Way". Fiji Sun. Retrieved 19 February 2022.
  40. ^ Britten, Liam (5 January 2018). "Bids ahoy: Queen of Burnaby auction fetches $653K for 53-year-old ferry". CBC News. Retrieved 19 February 2022.
  41. ^ "Queen of Burnaby has arrived in Union Bay, worrying some residents". CHEK. 3 December 2021. Retrieved 19 February 2022.

References

Preceded by BC Ferries flagship
1962–1985
Succeeded by