Jump to content

Nash Motors

Coordinates: 42°35′03″N 87°50′33″W / 42.5842°N 87.8424°W / 42.5842; -87.8424
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 174.68.155.153 (talk) at 00:08, 27 December 2022 (Nash automobiles: fixing spelling of name). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Nash Motors
IndustryAutomobile
FoundedApril 11, 1916; 108 years ago (1916-04-11)
DefunctFebruary 23, 1954; 70 years ago (1954-02-23)
FateMerged
SuccessorNash-Kelvinator
American Motors Corporation
HeadquartersKenosha, Wisconsin, United States
Key people
Charles W. Nash, Nils Erik Wahlberg
ProductsVehicles
Share of the Nash Motors Company, issued 2. June 1919

Nash Motors Company was an American automobile manufacturer based in Kenosha, Wisconsin from 1916 to 1937. From 1937 to 1954, Nash Motors was the automotive division of the Nash-Kelvinator Corporation. Nash production continued from 1954 to 1957 after the creation of American Motors Corporation.

In 1938 the firm debuted the heating and ventilation system which is still used today, unibody construction in 1941, seat belts in 1950, a US built compact car in 1950, and muscle cars in 1957.[1]

History

1917 Nash Fire Truck Model 3017
1922 Nash Roadster Model 42
1925 Nash
1929 Nash 400
1936 Nash 400 de Luxe

Nash Motors was founded in 1916 by former General Motors president Charles W. Nash, who acquired the Thomas B. Jeffery Company. Jeffery's best-known automobile was the Rambler whose mass production from a plant in Kenosha began in 1902.

The 1917 Nash Model 671 was the first vehicle produced to bear the name of the new company's founder.[2] Sales were positive for 1918 at 10,283 units. More models were added in 1919 and sales rose to 27,081 for the year.

Nash enjoyed decades of success by focusing its efforts to build cars "embodying honest worth ... [at] a price level which held out possibilities of a very wide market."[3]

The four-wheel drive Jeffery Quad truck became an important product for Nash. Approximately 11,500 Quads were built between 1913 and 1919. They served to move material during World War I under severe conditions. The Quad used Mehul differentials[4] with half-shafts mounted above the load-bearing dead axles to drive the hubs through hub-reduction gearing.[5] In addition, it featured four-wheel steering.[6] The Quad achieved the reputation of being the best four-wheel drive truck produced in the country.[7] The newly formed Nash Motors became the largest producer of four-wheel drives.[8] By 1918, capacity constraints at Nash meant the Paige-Detroit Motor Car Company began to assemble the Nash Quad under license and Nash patents.[9] Nash became the leading producer of military trucks by the end of World War I.[10] After the war ended, surplus Quads were used as heavy work trucks in fields such as construction and logging.[11]

Charles Nash convinced the chief engineer of GM's Oakland Division, Finnish-born Nils Eric Wahlberg, to move to Nash's new company.[12] The first Nash engine introduced in 1917 by Wahlberg had overhead valves.,[13] which Nash had learned about while working for Buick. Wahlberg is also credited with helping to design flow-through ventilation that is used today in nearly every motor vehicle. Introduced in 1938, Nash's Weather Eye directed fresh, outside air into the car's fan-boosted, filtered ventilation system, where it was warmed (or cooled), and then removed through rearward placed vents.[14] The process also helped to reduce humidity and equalize the slight pressure differential between the outside and inside of a moving vehicle. Another unique feature of Nash cars was the unequal wheel tracks. The front wheels were set slightly narrower than the rear, thus adding stability and improving cornering. Wahlberg was also an early proponent of wind tunnel testing for vehicles and during World War II worked with Theodore (Ted) Ulrich in the development of Nash's radically styled Airflyte models.[15]

Nash's slogan from the late 1920s and 1930s was "Give the customer more than he has paid for" and the cars lived up to it. Innovations included a straight-eight engine with overhead valves, twin spark plugs, and nine crankshaft bearings in 1930. The 1932 Ambassador Eight had synchromesh transmissions and free wheeling, automatic centralized chassis lubrication, a worm-drive rear end, and its suspension was adjustable inside the car. A long-time proponent of automotive safety, Nash was among the early mid- and low-priced cars to offer four-wheel brakes.

The Nash was a success among consumers that meant for the company "selling for a long time has been 100% a production problem... month after month all the cars that could be produced were sold before they left the factory floor."[3]

Creation of the Ajax

For the 1925 model year, Nash introduced the entry-level marque Ajax. The Ajax was produced in the newly acquired Mitchell Motor Car Company plant in Racine, Wisconsin. Mitchell was the manufacturer of Mitchell-brand automobiles between 1903 and 1923. Sales of Ajax automobiles, while quite respectable, were disappointing. It was believed that the same car would sell better if it were called a Nash. Thus the Ajax became the "Nash Light Six" in June, 1926 and sales did improve, just as expected. In an unusual move, Nash Motors offered all Ajax owners a kit to "convert" their Ajax into a Nash Light Six. This kit, supplied at no charge, included a set of new hubcaps, radiator badge, and all other parts necessary to change the identity of an Ajax into that of a Nash Light Six. This was done to protect Ajax owners from the inevitable drop in resale value when the Ajax marque was discontinued. In this way Nash Motors showed the high value they placed upon their customers' satisfaction and well-being. Most Ajax owners took advantage of this move, and "unconverted" Ajax cars are quite rare today.

Acquisition of LaFayette

Nash was the principal stockholder in LaFayette Motors, a company started in Indianapolis, Indiana, in 1920, and later moved to Milwaukee, Wisconsin, and the producer of a large, powerful, and expensive luxury car. Other major stockholders were Charles W. Nash and his friends and business associates. The LaFayette cars did not sell well.

In 1924, Nash absorbed LaFayette and converted its plant to produce Ajax automobiles. The LaFayette marque was reintroduced in 1934 as a lower priced companion to Nash. LaFayette ceased to be an independent marque with the introduction of the 1937 models. From 1937 through 1940, the Nash LaFayette was the lowest priced Nash, and was replaced by the new unibody Nash 600 for the 1941 model year.

Era of George Mason and Nash Kelvinator

Nash Special Six Series 430 Coupé 1929
Nash Standard Six Series 422 Convertible Coupé 1929

Before retiring, Charles Nash chose Kelvinator Corporation head George W. Mason to succeed him. Mason accepted, but placed one condition on the job: Nash would acquire controlling interest in Kelvinator, which at the time was the leading manufacturer of high-end refrigerators and kitchen appliances in the United States. The resulting company, as of January 4, 1937, was known as Nash-Kelvinator. Nash as a brand name continued to represent automobiles for the merged firm. This was the largest merger of companies not in the same industry up until that time.

In 1938, Nash introduced an optional conditioned air heating/ventilating system, an outcome of the expertise shared between Kelvinator and Nash. This was the first hot-water car heater to draw fresh air from outside the car, and is the basis of all modern internal combustion engine car heaters in use today. Also in 1938, Nash, along with other car manufacturers Studebaker and Graham, offered vacuum-controlled shifting, an early approach at removing the gearshift from the front floorboards. Automobiles equipped with the Automatic Vacuum Shift (supplied by the Evans Products Company) had a small gear selector lever mounted on the dashboard, immediately below the radio controls.

In 1936, Nash introduced the "Bed-In-A-Car" feature, which allowed the car's interior to be converted into a sleeping compartment. The rear seatback hinged up, allowing the rear seat cushion to be propped up into a level position. This also created an opening between the passenger compartment and the trunk. Two adults could sleep in the car, with their legs and feet in the trunk, and their heads and shoulders on the rear seat cushions. In 1949, this arrangement was modified so that fully reclining front seatbacks created a sleeping area entirely within the passenger compartment. In 1950 these reclining seatbacks were given the ability to lock into several intermediate positions. Nash soon called these "Airliner Reclining Seats".

In 1939, Nash added a thermostat to its "Conditioned Air System", and thus the famous Nash Weather Eye heater was introduced. The 1939 and 1940 Nash streamlined cars were designed by George Walker and Associates and freelance body stylist Don Mortrude. They were available in three series - LaFayette, Ambassador Six, and Ambassador Eight. For the 1940 model cars, Nash introduced independent coil spring front suspension and sealed beam headlights.

The 1941, Nash 600 was the first mass-produced unibody construction automobile made in the United States. Its lighter weight compared to body-on-frame automobiles and lower air drag helped it to achieve excellent fuel economy for its day. The "600" model designation is said to have been derived from overdrive-equipped examples of this car's ability to travel 600 miles (966 km) on a 20-US-gallon (75.7 L; 16.7 imp gal) tank of gasoline. It would achieve 30 miles per US gallon (7.8 L/100 km; 36 mpg‑imp). The 600 models used an unusual steering/front suspension system with extremely long kingpins. Inadequate lubrication became a problem for these systems, commonly resulting in premature failures. The design of the cars was improved by new front ends, upholstery, and chrome trim from 1942 to 1948. The larger Ambassador models shared the same bodies with the 600 but placed this unibody structure on top of a conventional frame, resulting in an extremely strong design.

Post-World War II passenger car production resumed on October 27, 1945, with an Ambassador sedan first off the assembly line. There were few changes from 1942 models, most noticeable were longer and slimmer upper grille bars and a projecting center section on the lower grille. The 600 models featured a conventional front suspension and steering system. Postwar Nashes were six-cylinder only; eight-cylinder engines did not return. The large Ambassador engine thus was the seven main bearing, overhead-valve, 234-cubic-inch (3.83 L), six-cylinder developing 112 bhp (84 kW; 114 PS).

Nash was considering the potential of offering a pickup truck and developed a prototype built on the existing chassis with a modified 600 front end and cab along with an outsourced cargo bed.[16] For the 1946 model year, Nash introduced the Suburban model that used wood framing and panels on the body. It was similar to the Chrysler Town and Country and Ford Sportsman models. Suburbans were continued in 1947 and 1948 models with 1,000 built over the three years. In 1948, the Ambassador convertible returned with 1,000 built.

Introduction of the Nash Airflyte

Nash Statesman 2-Door Sedan 1951

The aerodynamic 1949 Nash "Airflyte" was the first car of an advanced design introduced by the company after the war. Its aerodynamic body shape was developed in a wind tunnel. A "radically aerodynamic" design was first proposed around 1943 by two independent designers, Ted Pietsch and Bob Koto, to Nash's Vice President of Engineering, Nils E. Wahlberg.[17] The resulting all-new 1949 production cars were similar to the proposed sketches.[17] The objective was to reduce the automobile's body's drag coefficient by using a smooth shape and enclosed front fenders.[citation needed] Closed fenders were conceived by Nash engineers also in the exploration for added strength of unibody construction, whereas Hudson, a close competitor incorporated an actual unibody frame section into its closed rear wheel openings at about the same time.[citation needed] The "cutting-edge aerodynamics" of the all-new postwar design were the most "alarming" in the industry since the Chrysler Airflow.[18] It was built at one of two new factories in El Segundo, California, where the factory is still being used, having been re-purposed as the Boeing Satellite Development Center, immediately south of Los Angeles International Airport, on Nash Street.

A one-piece curved safety glass windshield was used on both models. Wide and low, the automobile featured more interior room than its 1948 predecessor although its height was 6 inches less. Due to its enclosed front fenders, Nash automobiles had a larger turning radius than most other cars. The 600 models used a 112-inch (2,800 mm) wheelbase while the Ambassador models stretched to 121 inches (3,073 mm). Both shared the same bodies. Coil springs were used on all four wheels. Three trim lines were offered in both models; Super, Super Special, and the top line Custom. Power was provided by an 82-horsepower (61 kW), 176-cubic-inch (2.88 L) flathead I6 cylinder in the 600 and a 112-horsepower (84 kW) OHV, 234-cubic-inch (3.83 L) I6 in the Ambassador.

In 1949, Nash became the first American cars with seat belts as a factory option.[19] They were installed in 40,000 cars, yet buyers did not want them and had dealers remove them.[20] There was "heated debate despite increasing scientific research" about their value and the option was "met with insurmountable sales resistance" with Nash reporting that after one year "only 1,000 had been used" by customers.[19][20]

The few changes for the 1950 Airflytes were a wider rear window, concealed fuel filler cap, some dashboard features, and the addition on Ambassadors of a GM Hydramatic automatic transmission option. The 600 models were renamed the "Statesman". A five-position Airliner reclining front passenger seatback was optional in both models. The stroke on the Statesman engine was increased 1/4 inch, giving 186 cubic inches (3.05 L) and 85 hp (63 kW), and the Ambassador received a new cylinder head that increased hp to 115.

Changes for the 1951 model Airflytes were to the rear fenders, elongated to incorporate vertical taillights, a new conventional dashboard replacing the Uniscope mounted on the steering column, and a new vertical bar grille with horizontal parking lights as well as the addition of GM Hydramatic as a Statesman option. The three best sales years for Nash up to that time were 1949, 1950, and 1951.

Nash Rambler Convertible "Landau" Coupe, c.1950, fixed profile convertible with retracting roof and rigid doors, the featured car of Lois Lane of the series Adventures of Superman [21][22][23]
Nash Metropolitan

Nash-Kelvinator's President George Mason felt Nash had the best chance of reaching a larger market by building small cars. He directed Nash towards the development of the first compact of the post-war era, the 1950 Nash Rambler, which was marketed as an up-market, feature-laden convertible. Mason orchestrated a contract manufacturing arrangement with Austin of the UK to build Nash's new subcompact car, the Metropolitan, it was introduced as a 1954 model.[citation needed]

The full-size Nash Airflytes were completely re-designed for 1952, and were promoted as the Golden Airflytes, in honor of Nash Motors' 50th anniversary as an automobile builder (the company now counting the years of the Thomas B. Jeffery Company as part of their own heritage.) "Great Cars Since 1902" became one of the company's advertising slogans. Nash was the only American car manufacturer to introduce an all-new 1952 model other than Ford Motor Company.

The new Golden Airflytes presented a more modern, squared-off look than did the 1949 through 1951 models, which were often compared to inverted bathtubs. Battista "Pinin" Farina of Italy was contracted by Nash to design a body for the new Golden Airflyte. Management was unhappy with the design and the result was a combination of an in-house design and Pinin Farina's model. Also in 1952, Nash began offering automatic transmissions, either a GM Hydramatic or a Borg-Warner overdrive transmission. Power was provided by a six-cylinder engine that was now bored out to 252 cubic inches (4.13 L).

Using its Kelvinator refrigeration experience, the automobile industry's first single-unit heating and air conditioning system was introduced by Nash in 1954.[24] This was a compact, affordable system for the mass market with controls on the dash and an electric clutch.[25] Entirely incorporated within the engine bay, the combined heating and cooling system had cold air for passengers enter through dash-mounted vents.[24] Competing systems used a separate heating system and an engine-mounted compressor with an evaporator in the car's trunk to deliver cold air through the rear package shelf and overhead vents. The alternative layout pioneered by Nash "became established practice and continues to form the basis of the modern and more sophisticated automatic climate control systems."[26]

Introduction of the Nash-Healey

1952 Pininfarina-styled Nash-Healey roadster

1951 saw the introduction of the Anglo-American Nash-Healey sports car, a collaborative effort between George Mason and British sports car manufacturer Donald Healey. Healey designed and built the chassis and suspension and also, until 1952, the aluminum body which another British manufacturer, Panelcraft Sheet Metal Co. Ltd., fabricated in Birmingham West Midlands. Nash shipped the powertrain components to England and Healey assembled the cars, which were then shipped to the U.S. for sale. In 1952 the Italian designer Battista Farina restyled the body, and its construction changed to steel and aluminum. High costs, low sales and Nash's focus on the Rambler line led to the termination of Nash-Healey production in 1954 after 506 automobiles had been produced.

The Nash-Healey, while a welcome attempt to improve Nash's stodgy image, did little to improve showroom traffic as Nash sales fell steadily from 1951 onward. The Airflyte had initially sold well in the postwar "seller's" market, but its bulbous styling, rooted in 1940s design trends, quickly became passé and its underpowered six cylinder engine proved a major liability against GM's new OHV short stroke V8s. Like fellow independents Hudson, Studebaker, and Packard, Nash charged higher prices for their cars than Ford and GM, who benefitted from volume of scale, and lacked the large dealer network or advertising budget of the Big Three. Low profit Rambler sales gradually made up more and more of Nash's total volume. In 1953-54, Ford and GM also waged an all-out price war on each other which further damaged the independents' sales. Mainline Nashes also lacked body styles; despite the introduction of a hardtop coupe in 1952, there was no convertible or station wagon although Rambler featured all of these.

In addition, while Nash had profited from military contracts during the Korean War, that conflict ended in mid-1953. At the same time, new Secretary of Defense Charles E. Wilson, ex-GM president, began steering defense contracts to his former employer at the expense of the rest of the automotive industry.

Mason commissioned Farina to design a Rambler-based two-seater coupe called the Palm Beach, which may have been intended as a successor to the Nash-Healey. However the project did not progress beyond a concept car.[27]

For European endurance racing Healey and his staff designed and built three special Nash-Healeys with lightweight aluminum racing bodies. These competition versions entered four consecutive Le Mans races and one Mille Miglia. At Le Mans they achieved fourth overall in 1950, sixth overall and fourth in class in 1951, third overall and first in class in 1952, and eleventh overall in 1953. In the Mille Miglia they finished ninth overall in 1950 and seventh overall, fourth in class, in 1952.

Creation of American Motors

1955 Nash Rambler Cross Country station wagon

In January 1954, Nash announced the acquisition of the Hudson Motor Car Company as a friendly merger, creating American Motors Corporation (AMC). To improve the financial performance of the combined companies, all production beginning with the 1955 Nash and Hudson models would happen at Nash's Kenosha plant. Nash would focus most of its marketing resources on its smaller Rambler models, and Hudson would focus its marketing efforts on its full-sized cars.

One of the first things Mason did as CEO of the new company was to initiate talks with James J. Nance, president of Packard, for parts-sharing arrangements between AMC and Packard. At this time AMC did not have its own V8 engine and an agreement was made for the new 320 cu in (5.2 L) Packard V8 engine and Packard's Ultramatic automatic transmission to be used in the 1955 Nash Ambassador and Hudson Hornet models.

In July 1954, Packard acquired Studebaker to form Studebaker-Packard Corporation,[28] however further talks of a merger between AMC and Packard-Studebaker were cut short when Mason died on October 8, 1954. A week after his death, Mason's successor, George W. Romney, announced "there are no mergers under way either directly or indirectly".[29] Nevertheless, Romney continued with Mason's commitment to buy components from Studebaker-Packard Corporation. Although Mason and Nance had previously agreed that Studebaker-Packard would purchase parts from AMC, it did not do so. Moreover, Packard's engines and transmissions were comparatively expensive, so AMC began development of its own V8 engine, and replaced the outsourced unit by mid-1956.[30]

For 1955, all the large Nash and Hudson automobiles were based on a Nash-derived, shared common unitized body shell using styling themes by Pinin Farina, Edmund E. Anderson, and Frank Spring. Each had individual powertrains and separate, non-interchangeable body parts.[31] This mimicked the longtime practice Big Three (General Motors, Ford, and Chrysler) that allowed for maximum manufacturing economy. Anderson set up separate design studios for Nash, Hudson, and Rambler.

Also for 1955, George Romney quickly moved to get rid of the unpopular front fender skirts on Nashes and Ramblers, which were widely disliked by customers due to the difficulty they created when steering the cars and changing tires, and reportedly retained due to the insistence of George Mason, who liked the appearance of them.

Even with the merger forming AMC, they were held to a total of about four percent of the market and thus were under pressure to lower expenses and tooling costs for new models, perhaps by innovation.[32]

The Nash Metropolitan, which had been marketed under either the Nash or Hudson brands, became a make unto its own in 1957, as did the Rambler. By this point, Rambler sales made up the vast majority of AMC's volume, so George Romney decided to phase out the Nash and Hudson nameplates and focus solely on Rambler. This move would pay off the following year when an economic recession struck the United States and created a strong demand for economical compact cars.[33] Nash and Hudson production ended with the last Hornet made on June 25, 1957.[34] From 1958 to 1962, Rambler and the Metropolitan were the only brands of cars sold by AMC. By 1965 the Rambler name would begin to be phased out and AMC would take over as the brand name until the 1988 model year. In 1970, American Motors acquired Kaiser Jeep (the descendant of Willys-Overland Motors) and its Toledo, Ohio, based manufacturing facilities. In 1979, AMC entered into a technology partnership with Renault. In 1987, Chrysler Corporation made a public offering to acquire all shares of AMC on the NYSE. The shareholders approved the offer and AMC became a division of Chrysler Corporation.

International markets

Since the early days, Nash vehicles were exported as complete cars or in knock-down kit form for local assembly to many countries around the world including right-hand-drive markets such as United Kingdom,[35] Australia, New Zealand, and South Africa. International production for both the Nash and Hudson marques was consolidated after the merger of Nash and Hudson to form American Motors Corporation (AMC) in 1954 after which operations thereafter occurring at the former Nash plant in Kenosha and at the Brampton plant in Canada until 1957 when both the Nash and Hudson marques were retired.

Australia

A number of distributors for each of the Australian states built and sold Nash vehicles beginning in the 1920s. As was the practice for all car brands during the early 20th Century, the chassis and engines were imported and the bodies were locally built by Australian coach builders. Early distributors were Wilsford Limited for New South Wales,[36] Richards Brothers for Victoria and the Riverina,[37] Peels Limited for Queensland,[38] Eric Madren Motors (later Nash Cars (W.A) Limited) for Western Australia,[39] and Northern Motors for Tasmania.[40] The recovery period following the end of World War II saw a lull in car manufacturing, petrol rationing, and currency shortages. Despite these factors, some cars were imported in the late 1940s and the 1950s. In 1950 a small quantity of Nash trucks were assembled by Davies Pty Ltd in Launceston, Tasmania.

After the Nash-Hudson merger in 1954, AMC's new Rambler vehicles were imported into Australia and distributed by Ira L. & A.C Berk Pty Ltd[41] which had previously held the Hudson franchise since 1939. As Hudson was the more recognized brand in Australia they were initially sold as Hudson. The Nash Metropolitan was not sold in Australia. The first Rambler-badged vehicles were imported in 1957. This first shipment consisted of 24 vehicles, 10 of which were Rambler station wagons. Small numbers of Rambler Sixes were imported into Australia up until 1960. AMC made a new deal with Port Melbourne vehicle assembler Australian Motor Industries (AMI) in 1960 to build AMC vehicles from knock-down kits, production of which ran from 1961 until 1976. AMI eventually became Toyota Australia.

New Zealand

From 1935 Nash motor vehicles were assembled in New Zealand by Christchurch company Motor Assemblies Limited. The plant also made Studebaker and Standard vehicles and was acquired by Standard Motors in 1954,[42] after which production went to Auckland company VW Motors at their Volkswagen plant in Otahuhu, Auckland until 1962.[43] New Zealand saw the Nash Ramblers and the British-built, right-hand-drive Nash Metropolitan. In 1963 AMC struck a deal with Thames company Campbell Motors to build a new vehicle assembly plant for AMC vehicles which began production in 1964. Renamed Campbell Motor Industries (CMI) the plant built Rambler vehicles from knock-down kits until 1971. CMI eventually became Toyota New Zealand.

South Africa

Following World War II, Nash motor vehicles were assembled in South Africa by a newly built assembly operation in East London Car Distributors and Assemblers (CDA.) The plant also built Packard, Renault, and Standard motor vehicles. CDA was eventually taken over, firstly by Chrysler, and finally by Peugeot.[44]

United Kingdom

Nash vehicles were imported into the United Kingdom by London company Nash Concessionaires.[45][46] After 1961 Rambler imports switched to the former U.K Hudson operation in Chiswick which was accordingly renamed Rambler Motors (A.M.C.) Limited.[47] AMC's deal with Austin for the production of the Nash Metropolitan was independent of the Chiswick Rambler operation.

Nash automobile brands

Nash automobiles

Motorsport

Like most American manufacturers of the fifties, Nash was a participant in the Grand National Stock Car series.

See also

References

Inline
  1. ^ Foster, Patrick R. AMC Cars 1954–1957, an Illustrated History, p.158. Iconografix 2004. ISBN 1-58388-112-3.
  2. ^ Lewis, Albert L.; Musciano, Walter A. (1977). Automobiles of the World. Simon and Schuster. p. 280. ISBN 978-0-671-22485-1.
  3. ^ a b Forbes, B.C.; Foster, O. D. (c. 2003) [1926]. Automotive Giants of America: Men Who Are Making Our Motor Industry. Forbes Publishing (Kessinger Publishing). pp. 211–224. ISBN 978-0-7661-6177-1.
  4. ^ American industries, Volume 14. National Association of Manufacturers (U.S.). 1903. p. 124. Retrieved 29 August 2010.
  5. ^ "Jeffrey Quad". 4wdonline.com. Retrieved 3 September 2010.
  6. ^ Eckermann, Erik (2001). World history of the automobile. Society of Automotive Engineers. p. 76. ISBN 978-0-7680-0800-5. Retrieved 3 September 2010.
  7. ^ "New York Curb and Industrial Issues". Copper Curb and Mining Outlook. 14 (18): 15. 24 January 1917. Retrieved 3 September 2010.
  8. ^ Botti, Timothy J. (2006). Envy of the world: a history of the U.S. economy & big business. Algora Publishing. p. 188. ISBN 978-0-87586-432-7. Retrieved 3 September 2010.
  9. ^ Keller, Michael E. (1998). The Graham Legacy: Graham-Paige to 1932. Turner Publishing. ISBN 978-1-56311-470-0. Retrieved 3 September 2010.
  10. ^ Flink, James J. (1990). The automobile age. MIT Press. p. 102. ISBN 978-0-262-56055-9. Retrieved 3 September 2010.
  11. ^ Fregulia, Carolyn (2008). Logging in the Central Sierra. Arcadia Publishing SC. p. 86. ISBN 978-0-7385-5816-5. Retrieved 3 September 2010.
  12. ^ Norbye, Jan P. (1981). The 100 greatest American cars. TAB Books. ISBN 978-0-8306-9623-9.
  13. ^ Norbye, Jan P. (1981). The complete handbook of automotive power trains. TAB Books. ISBN 978-0-8306-9623-9.
  14. ^ Wolfe, Steven J. (2000). "HVAC Time Line". Refrigeration Service Engineers Society Twin Cities Chapter. Archived from the original on 21 November 2009. Retrieved 18 June 2010.
  15. ^ Automobiles of the '50s. Publications International. 1993. p. 63. ISBN 978-0-7853-2008-1.
  16. ^ "1946 Nash P1 Pickup For Sale". carandclassic.co.uk. Retrieved 1 November 2020.
  17. ^ a b Foster, Patrick R. (1998). "The Designers". The Nash Styling Sketchbook. The Olde Milford Press. p. 1. ISBN 9780966201901. Retrieved April 14, 2022.
  18. ^ Mueller, Mike (1997). Fifties American Cars. MBI Publishing. p. 67. ISBN 9780879389246.
  19. ^ a b Janik, Erika (September 25, 2017). "The Surprisingly Controversial History Of Seat Belts". Wisconsin Public Radio. Retrieved April 14, 2022.
  20. ^ a b Ronan, Larry (April 1979). Seatbelts: 1949-1956. US Department of Transportation, National Highway Traffic Safety Administration (DOT-TSC-NHTSA-79-1). p. 17.
  21. ^ "1951 Rambler Custom Landau". auto.howstuffworks.com. May 27, 2007. Archived from the original on August 15, 2020. Retrieved April 14, 2022. {{cite web}}: Unknown parameter |authors= ignored (help)
  22. ^ "Lois Lane's 1950 Nash Rambler Custom". articboy.com. Retrieved April 14, 2022.
  23. ^ Donnelly, Jim (June 2005). "TV Cars". Hemmings Classic Car. Retrieved April 14, 2022.
  24. ^ a b Binder, Al; Ward's staff (February 1, 2001). "Rearview Mirror". Ward's AutoWorld. Archived from the original on November 24, 2011. Retrieved April 14, 2022.
  25. ^ Daly, Steven (2006). Automotive Air-Conditioning and Climate Control Systems. Elsevier Science & Technology Books. p. 2. ISBN 9780750669559.
  26. ^ Nunney, Malcolm J. (2006). Light and Heavy Vehicle Technology. Elsevier Science & Technology Books. p. 147. ISBN 9780750680370.
  27. ^ "AMX Palm Beach", undated article by the auto editors of Consumer Guide Archived 2012-03-19 at the Wayback Machine. Retrieved on July 17, 2008.
  28. ^ "Autos: Merger No. 3". Time. 28 June 1954. Archived from the original on November 16, 2010. Retrieved 17 March 2013.
  29. ^ "Personnel: Changes of the Week". Time. 25 October 1954. Archived from the original on September 30, 2007. Retrieved 15 September 2013.
  30. ^ "Autos: New Entry". Time. 24 March 1954. Archived from the original on November 16, 2010. Retrieved 15 September 2013.
  31. ^ Donovan, Leo (January 1955). "Detroit Listening Post". Popular Mechanics. 103 (1): 110. Retrieved 3 August 2015.
  32. ^ Donovan, Leo (August 1954). "Detroit Listening Post". Popular Mechanics. 102 (2): 82. Retrieved 3 August 2015.
  33. ^ Lamm, Michael; Holls, Dave (1996). A century of automotive style: 100 years of American car design. Lamm-Morada. pp. 201–202. ISBN 9780932128072. Retrieved 3 August 2015.
  34. ^ Flory, Jr., J. "Kelly" (2008). American Cars, 1946-1959 Every Model Every Year. McFarland. p. 815. ISBN 9780786432295. Retrieved 3 August 2015.
  35. ^ "The Cars at Earls Court". Motorsportmagazine.com. Retrieved 13 November 2021.
  36. ^ "The Sun (Sydney, NSW : 1910 - 1954), Sat 22 Nov 1924, Page 8, THE NEW NASH". Trove.nla.gov.au. Retrieved November 13, 2021.
  37. ^ "Farmers' Advocate (Melbourne, Vic. : 1917 - 1924), Fri 14 Sep 1923, Page 6, MOTORS HERE". Trove.nla.gov.au. Retrieved November 13, 2021.
  38. ^ "The Brisbane Courier (Qld. : 1864 - 1933), Sat 12 Aug 1922, Page 12, Nash Motor Cars". Trove.nla.gov.au. Retrieved November 13, 2021.
  39. ^ "Truth (Perth, WA : 1903 - 1931), Sun 22 Dec 1929, Page 11, Nash Motors". Trove.nla.gov.au. Retrieved November 13, 2021.
  40. ^ "Daily Telegraph (Launceston, Tas. : 1883 - 1928), Wed 3 Oct 1923, Page 11, NASH CARS". Trove.nla.gov.au. Retrieved November 13, 2021.
  41. ^ "Evening News (Sydney, NSW : 1869 - 1931), Fri 13 Jan 1928, Page 14, IRA L. AND A. C. BERK". Trove.nla.gov.au. Retrieved November 13, 2021.
  42. ^ W D Rose, Development options in the New Zealand motor car assembly industry, Research paper 16, NZIER, 1971
  43. ^ Todd Niall, The Empty Halls of New Zealand's Car Assembly Industry. Sunday Star Times, 6 October 2018 accessed 28 February 2019 Archived 5 June 2019 at the Wayback Machine
  44. ^ "Motor Assemblies: MOTOR ASSEMBLIES LIMITED". Motor-assemblies.blogspot.com. 24 January 2012. Retrieved 13 November 2021.
  45. ^ "RETRO ADS - RAMBLER CLASSIC & AMERICAN". Classicsworld.co.uk. 6 October 2017. Retrieved 13 November 2021.
  46. ^ "The cars at Earls Court". Motorsportmagazine.com. Retrieved 13 November 2021.
  47. ^ "Rambler Motors - Graces Guide". Gracesguide.co.uk. Retrieved 13 November 2021.
General
  • Gunnell, John, ed. (1987). The Standard Catalog of American Cars 1946–1975. Krause Publications. ISBN 978-0-87341-096-0.

42°35′03″N 87°50′33″W / 42.5842°N 87.8424°W / 42.5842; -87.8424