Roland U-20

U-20
The U-20 synthesizer
Manufacturer	Roland Corporation
Dates	1989 ~ 1991
Price	£1050 GBP
Technical specifications
Polyphony	30 voices
Timbrality	6 parts + 1 drumpart
Oscillator	2MB ROM samples
LFO	1
Synthesis type	PCM sample based
Filter	None
Attenuator	ADSR envelope
Aftertouch expression	Yes
Velocity expression	Yes
Storage memory	128 tones, 64 patches
Effects	Reverb, chorus and delay
Input/output
Keyboard	61 keys
Left-hand control	MIDI + 2 data-sliders
External control	Arpeggiator, Chord Play

The Roland U-20 is a PCM-sample synthesizer, released by Roland in 1988.

The U-20 is described by Roland as a 'RS-PCM keyboard', where RS stands for ReSynthesized because the sound-engine can play back a modified version of stored PCM samples.

Overview

The synthesizer engine itself merely plays back stored PCM samples. Such a synthesizer is known as a rompler, as opposed to a sampler, which lets you record and load in custom samples. Nevertheless, sample playback can be slightly customized via editing its ADSR envelope and applying DSP effects, like reverb or chorus. A drawback is the absence of filters.

The U-20 has standard 64 patches, and can be doubled with an optional RAM-card (the M-256E). There are also two extra slots for ROM PCM-cards to expand the number of available sounds.

There's a built-in arpeggiator, a Chord Play feature which plays back a full chord with only one finger, 2 assignable sliders, and the U-20 is compatible with the SN-U110 and SN-MV30-S1 series of soundcards.

With one U-20 it's possible to produce a reasonably complete orchestration. The maximum number of voices is then limited by the device itself.

The U-20 has given certain Roland-sounds more publicity, like the shakuhachi, the bell, guitar-samples with distortion, and the typical Roland piano-sound, which can be found in later Roland models like the JV and XV series.

Editing sounds is limited and relatively complicated due to the small screen and menu layout. Thanks to its popularity, later on there was software made available to edit sounds on a computer via MIDI, or by adding new sounds to the device. There are also hardware presets in programs like Cubase allowing easier communication.

U-220

The U-220 is a 1U (19-inch rackmount) module of the U-20. It was the successor of the U-110 that was released in 1988. The U-220 has the same LCD screen and expansion possibilities, but fewer knobs on the front panel than the U-20.

Features

• 128 different voices (additional may be supplied with ROM/RAM cards)
• Programmable DSP unit offers reverb, delay, chorus
• 3 demo songs
• 61 keys with note velocity and aftertouch abilities
• MIDI In/Out/Thru DIN connectors
• Phones output, Mix Output (L/R) and Direct Output (L/R) jacks
• Pedal switch and Expression pedal inputs
• Powered by external 110-230 V AC source

Issues

The amount of force needed to trigger aftertouch is very impractical and thus unusable on this instrument. Another point of criticism was the poor readable manual.

Along with the JV series, this was also another Roland model that was plagued by the "red epoxy of death". This red epoxy was used to glue the key weights into the bottom of keys, and over time has a tendency to become viscous and leak out into the unit, harming electronics and overall playability. Roland Japan offered a recall repair on the keybed for a number of years, but has since ceased.

External links

• Site about the U-220
• U-20 HOMEPAGE (Patches, Tones, Utilities, Info, DIY's and Reference Materials) → also useful for U-220 & U-110 owners as well!
• Synthmania site with audio demo's
• Polynominal demos, manual, review and resources - U-20
• Polynominal demos, manual, review and resources- U-220
• U-20 owner's manual (PDF)
• U-220 owner's manual (PDF)