Jump to content

BMW 3/20

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by InternetArchiveBot (talk | contribs) at 00:26, 21 September 2023 (Rescuing 0 sources and tagging 1 as dead.) #IABot (v2.0.9.5). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
BMW 3/20[1]
Overview
ManufacturerBMW
Also calledAM-1, AM-2, AM-3, AM-4
Production1932–1934
AssemblyGermany: Eisenach
DesignerAlfred Böning
Body and chassis
ClassCity car
Body stylefour seat saloon
four seat cabriolet
two seat convertible coupé
LayoutFR layout
Powertrain
Engine788 cc (48.1 cu in) OHV straight-4
Transmission4-speed manual
Dimensions
Wheelbase2,150 mm (84.6 in)
Length3,200 mm (126 in)
Width1,420 mm (56 in)
Height1,550 mm (61 in)
Kerb weight650 kg (1,433 lb) with saloon body
Chronology
PredecessorBMW 3/15
SuccessorBMW 309

The BMW 3/20 PS was the first BMW automobile designed entirely by BMW. It was manufactured from 1932 to 1934, replacing the 3/15 model that was initially an Austin 7 manufactured under licence from the Austin Motor Company.

BMW 3/20 AM 4 engine

The engine used in the 3/20 was based on the Austin Seven engine used in the 3/15, but its crankshaft ran in plain bearings instead of roller bearings and had an 80 mm (3.1 in) stroke, generating a displacement of 788 cc (48.1 cu in).[1] The new engine design also had a water pump and an overhead valve cylinder head. These design changes caused the engine to generate 20 hp, but did not change the taxable horsepower rating of 3 PS, thus giving the model designation 3/20.[2]

The 3/20 was larger than the 3/15, with an 84.6 in (2,149 mm) wheelbase and a body 3 in (76 mm) lower than the 3/15.[2] The 3/20 used a backbone frame unrelated to the 3/15's Austin Seven "A" frame.[3][4] It inherited the 3/15 DA-4's independent front suspension and added a swing axle independent rear suspension, using a transverse leaf spring similar to that used at the front.[1][4] The standard bodies for the car were built by Daimler-Benz in Sindelfingen.[1][4]

Journalist and engineer Josef Ganz, who had criticized the 3/15 DA-4's suspension system in the magazine Motor-Kritik,[5] was contracted in July 1931 as a consultant in the design of the 3/20 AM-1.[citation needed]

Four versions of the 3/20 were built: AM 1, AM 2, AM 3 and AM 4, where AM denoted Automobil München.[1]

References

[edit]
Citations
  1. ^ a b c d e Norbye, p.30
  2. ^ a b Unixnerd: BMW's Early History
  3. ^ Noakes, p.24
  4. ^ a b c Robson, p.36
  5. ^ Article ‘Die Schwingachse des Kleinen,’ Motor-Kritik magazine, issue 3, early February 1931
Sources
  • Noakes, Andrew (2005). The Ultimate History of BMW. Bath, UK: Parragon Publishing. ISBN 1-4054-5316-8.
  • Norbye, Jan P. (1984). BMW - Bavaria's Driving Machines. Skokie, IL: Publications International. ISBN 0-517-42464-9.
  • Robson, Graham (2008-11-07). "The First Cars—Dixi, BMW, and Advanced Engineering". Inside the BMW Factories: Building the Ultimate Driving Machine. Minneapolis, MN US: MBI Publishing. p 36 The development of the 3/20. ISBN 978-0-7603-3463-8. Retrieved 2013-02-15.[permanent dead link]
  • "BMW's Early History". unixnerd.demon.co.uk. Archived from the original on 23 February 2008. Retrieved 2008-02-18.
  • Ganz, Josef (February 1931). "Die Schwingachse des Kleinen". Motor-Kritik (in German) (3).