Jump to content

Eungai railway station

Coordinates: 30°50′56″S 152°54′00″E / 30.8490°S 152.9001°E / -30.8490; 152.9001
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 134.255.217.122 (talk) at 06:49, 23 October 2023. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Nambucca Heads
General information
LocationRailway Road, Nambucca Heads
Coordinates30°37′39″S 152°58′43″E / 30.6275°S 152.9785°E / -30.6275; 152.9785
Elevation15 metres (49 ft)
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance565.10 km (351.14 mi) from Central
Platforms1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeNBH
History
Opened3 December 1923; 101 years ago (1923-12-03)
Services
Preceding station NSW TrainLink Following station
Urunga
towards Grafton or Casino
NSW TrainLink North Coast Line
Except northbound Brisbane XPT
Macksville
towards Sydney

Nambucca Heads railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Nambucca Heads, opening on 3 December 1923 as Nambucca Heads. It was renamed Nambucca in October 1925, before resuming its original name on 21 June 1964.[1][2]

Platforms and services

Nambucca Heads has one platform. Each day northbound XPT services operate to Grafton and Casino, with three southbound services operating to Sydney including the Brisbane XPT.[3] This station is a request stop for the southbound Casino XPT, so this service stops here only if passengers booked to board/alight here. The northbound Brisbane XPT passes through this station without stopping.

Platform Line Stopping pattern Notes
1 services to Sydney Central, Grafton & Casino southbound Casino XPT request stop
(booked passengers only)

References

  1. ^ Nambucca Station NSWrail.net
  2. ^ Nambucca Heads Railway Station NSW Environment & Heritage
  3. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Eungai
General information
LocationStation Street, Eungai
Coordinates30°50′56″S 152°54′00″E / 30.8490°S 152.9001°E / -30.8490; 152.9001{{#coordinates:}}: cannot have more than one primary tag per page
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance534.6 km (332.2 mi) from Central
Platforms1
Tracks1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeENG
History
Opened1 July 1919; 105 years ago (1919-07-01)
Services
Preceding station NSW TrainLink Following station
Macksville
towards Grafton or Casino
NSW TrainLink North Coast Line
Grafton & northbound Casino XPTs
Kempsey
towards Sydney
Location
Eungai is located in New South Wales
Eungai
Eungai
Location within New South Wales

Eungai railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Eungai, opening on 1 July 1919 when the line was extended from Kempsey to Macksville.[1] Opposite the station lies a passing loop.[2] It was extended to 1.5 kilometres in January 1996.[3]

Platforms and services

Eungai has one platform. Each day northbound XPT services operate to Grafton and Casino, with only the Grafton XPT southbound service stopping to Sydney.[4] This station is a request stop, so the train stops only if passengers booked to board/alight here. The Brisbane, southbound Brisbane and the southbound Casino XPTs pass through this station without stopping.

Platform Line Stopping pattern Notes
1 request stop (booked passengers only)

References

  1. ^ Eungai Station NSWrail.net
  2. ^ Eungai - Nambucca Heads SA Track & Signal
  3. ^ "Signalling & Safeworking" Railway Digest March 1996 page 30
  4. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Nambucca Heads
General information
LocationRailway Road, Nambucca Heads
Coordinates30°37′39″S 152°58′43″E / 30.6275°S 152.9785°E / -30.6275; 152.9785{{#coordinates:}}: cannot have more than one primary tag per page
Elevation15 metres (49 ft)
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance565.10 km (351.14 mi) from Central
Platforms1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeNBH
History
Opened3 December 1923; 101 years ago (1923-12-03)
Services
Preceding station NSW TrainLink Following station
Urunga
towards Grafton or Casino
NSW TrainLink North Coast Line
Except northbound Brisbane XPT
Macksville
towards Sydney

Nambucca Heads railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Nambucca Heads, opening on 3 December 1923 as Nambucca Heads. It was renamed Nambucca in October 1925, before resuming its original name on 21 June 1964.[1][2]

Platforms and services

Nambucca Heads has one platform. Each day northbound XPT services operate to Grafton and Casino, with three southbound services operating to Sydney including the Brisbane XPT.[3] This station is a request stop for the southbound Casino XPT, so this service stops here only if passengers booked to board/alight here. The northbound Brisbane XPT passes through this station without stopping.

Platform Line Stopping pattern Notes
1 services to Sydney Central, Grafton & Casino southbound Casino XPT request stop
(booked passengers only)

References

  1. ^ Nambucca Station NSWrail.net
  2. ^ Nambucca Heads Railway Station NSW Environment & Heritage
  3. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Eungai
General information
LocationStation Street, Eungai
Coordinates30°50′56″S 152°54′00″E / 30.8490°S 152.9001°E / -30.8490; 152.9001{{#coordinates:}}: cannot have more than one primary tag per page
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance534.6 km (332.2 mi) from Central
Platforms1
Tracks1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeENG
History
Opened1 July 1919; 105 years ago (1919-07-01)
Services
Preceding station NSW TrainLink Following station
Macksville
towards Grafton or Casino
NSW TrainLink North Coast Line
Grafton & northbound Casino XPTs
Kempsey
towards Sydney
Location
Eungai is located in New South Wales
Eungai
Eungai
Location within New South Wales

Eungai railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Eungai, opening on 1 July 1919 when the line was extended from Kempsey to Macksville.[1] Opposite the station lies a passing loop.[2] It was extended to 1.5 kilometres in January 1996.[3]

Platforms and services

Eungai has one platform. Each day northbound XPT services operate to Grafton and Casino, with only the Grafton XPT southbound service stopping to Sydney.[4] This station is a request stop, so the train stops only if passengers booked to board/alight here. The Brisbane, southbound Brisbane and the southbound Casino XPTs pass through this station without stopping.

Platform Line Stopping pattern Notes
1 request stop (booked passengers only)

References

  1. ^ Eungai Station NSWrail.net
  2. ^ Eungai - Nambucca Heads SA Track & Signal
  3. ^ "Signalling & Safeworking" Railway Digest March 1996 page 30
  4. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Nambucca Heads
General information
LocationRailway Road, Nambucca Heads
Coordinates30°37′39″S 152°58′43″E / 30.6275°S 152.9785°E / -30.6275; 152.9785{{#coordinates:}}: cannot have more than one primary tag per page
Elevation15 metres (49 ft)
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance565.10 km (351.14 mi) from Central
Platforms1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeNBH
History
Opened3 December 1923; 101 years ago (1923-12-03)
Services
Preceding station NSW TrainLink Following station
Urunga
towards Grafton or Casino
NSW TrainLink North Coast Line
Except northbound Brisbane XPT
Macksville
towards Sydney

Nambucca Heads railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Nambucca Heads, opening on 3 December 1923 as Nambucca Heads. It was renamed Nambucca in October 1925, before resuming its original name on 21 June 1964.[1][2]

Platforms and services

Nambucca Heads has one platform. Each day northbound XPT services operate to Grafton and Casino, with three southbound services operating to Sydney including the Brisbane XPT.[3] This station is a request stop for the southbound Casino XPT, so this service stops here only if passengers booked to board/alight here. The northbound Brisbane XPT passes through this station without stopping.

Platform Line Stopping pattern Notes
1 services to Sydney Central, Grafton & Casino southbound Casino XPT request stop
(booked passengers only)

References

  1. ^ Nambucca Station NSWrail.net
  2. ^ Nambucca Heads Railway Station NSW Environment & Heritage
  3. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Eungai
General information
LocationStation Street, Eungai
Coordinates30°50′56″S 152°54′00″E / 30.8490°S 152.9001°E / -30.8490; 152.9001{{#coordinates:}}: cannot have more than one primary tag per page
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance534.6 km (332.2 mi) from Central
Platforms1
Tracks1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeENG
History
Opened1 July 1919; 105 years ago (1919-07-01)
Services
Preceding station NSW TrainLink Following station
Macksville
towards Grafton or Casino
NSW TrainLink North Coast Line
Grafton & northbound Casino XPTs
Kempsey
towards Sydney
Location
Eungai is located in New South Wales
Eungai
Eungai
Location within New South Wales

Eungai railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Eungai, opening on 1 July 1919 when the line was extended from Kempsey to Macksville.[1] Opposite the station lies a passing loop.[2] It was extended to 1.5 kilometres in January 1996.[3]

Platforms and services

Eungai has one platform. Each day northbound XPT services operate to Grafton and Casino, with only the Grafton XPT southbound service stopping to Sydney.[4] This station is a request stop, so the train stops only if passengers booked to board/alight here. The Brisbane, southbound Brisbane and the southbound Casino XPTs pass through this station without stopping.

Platform Line Stopping pattern Notes
1 request stop (booked passengers only)

References

  1. ^ Eungai Station NSWrail.net
  2. ^ Eungai - Nambucca Heads SA Track & Signal
  3. ^ "Signalling & Safeworking" Railway Digest March 1996 page 30
  4. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Nambucca Heads
General information
LocationRailway Road, Nambucca Heads
Coordinates30°37′39″S 152°58′43″E / 30.6275°S 152.9785°E / -30.6275; 152.9785{{#coordinates:}}: cannot have more than one primary tag per page
Elevation15 metres (49 ft)
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance565.10 km (351.14 mi) from Central
Platforms1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeNBH
History
Opened3 December 1923; 101 years ago (1923-12-03)
Services
Preceding station NSW TrainLink Following station
Urunga
towards Grafton or Casino
NSW TrainLink North Coast Line
Except northbound Brisbane XPT
Macksville
towards Sydney

Nambucca Heads railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Nambucca Heads, opening on 3 December 1923 as Nambucca Heads. It was renamed Nambucca in October 1925, before resuming its original name on 21 June 1964.[1][2]

Platforms and services

Nambucca Heads has one platform. Each day northbound XPT services operate to Grafton and Casino, with three southbound services operating to Sydney including the Brisbane XPT.[3] This station is a request stop for the southbound Casino XPT, so this service stops here only if passengers booked to board/alight here. The northbound Brisbane XPT passes through this station without stopping.

Platform Line Stopping pattern Notes
1 services to Sydney Central, Grafton & Casino southbound Casino XPT request stop
(booked passengers only)

References

  1. ^ Nambucca Station NSWrail.net
  2. ^ Nambucca Heads Railway Station NSW Environment & Heritage
  3. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.

Eungai
General information
LocationStation Street, Eungai
Coordinates30°50′56″S 152°54′00″E / 30.8490°S 152.9001°E / -30.8490; 152.9001{{#coordinates:}}: cannot have more than one primary tag per page
Owned byTransport Asset Holding Entity
Operated byNSW TrainLink
Line(s)North Coast
Distance534.6 km (332.2 mi) from Central
Platforms1
Tracks1
Construction
Structure typeGround
AccessibleYes
Other information
Station codeENG
History
Opened1 July 1919; 105 years ago (1919-07-01)
Services
Preceding station NSW TrainLink Following station
Macksville
towards Grafton or Casino
NSW TrainLink North Coast Line
Grafton & northbound Casino XPTs
Kempsey
towards Sydney
Location
Eungai is located in New South Wales
Eungai
Eungai
Location within New South Wales

Eungai railway station is located on the North Coast line in New South Wales, Australia. It serves the town of Eungai, opening on 1 July 1919 when the line was extended from Kempsey to Macksville.[1] Opposite the station lies a passing loop.[2] It was extended to 1.5 kilometres in January 1996.[3]

Platforms and services

Eungai has one platform. Each day northbound XPT services operate to Grafton and Casino, with only the Grafton XPT southbound service stopping to Sydney.[4] This station is a request stop, so the train stops only if passengers booked to board/alight here. The Brisbane, southbound Brisbane and the southbound Casino XPTs pass through this station without stopping.

Platform Line Stopping pattern Notes
1 request stop (booked passengers only)

References

  1. ^ Eungai Station NSWrail.net
  2. ^ Eungai - Nambucca Heads SA Track & Signal
  3. ^ "Signalling & Safeworking" Railway Digest March 1996 page 30
  4. ^ "North Coast timetable". NSW TrainLink. 7 September 2019.