Jump to content

MV Commodore Clipper

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Qwerfjkl (bot) (talk | contribs) at 20:45, 29 April 2024 (Bot: Adding AfC template (Task 15)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Commodore Clipper, Portsmouth
History
Name1999-Present: Commodore Clipper
OperatorCondor Ferries
Port of registryNassau,  Bahamas[1]
BuilderVan der Giessen de Noord, Netherlands
Maiden voyage1999
In service1999
Identification
Statusin active service
General characteristics
TypeROPAX ferry
Tonnage13,456 GT
Length129.19 m (423 ft 10 in)
Beam23.4 m (76 ft 9 in)
Draft5.8 m (19 ft 0 in)
Installed power
  • 2 × MaK 9M32 diesel engines
  • 4,320 kW each at 600 rpm
Speed18.8 knots (34.8 km/h; 21.6 mph)
Capacity
  • 500 passengers
  • 1,265 m (4,150 ft) lane for vehicles
Crew38

MV Commodore Clipper is a roll-on/roll-off ferry owned by Condor Ferries.

History

Commodore Clipper was new to Commodore Ferries/Condor Ferries in 1999.

Accidents and issues in service

On a sailing from Jersey to Portsmouth, an electrical issue with a power supply caused fire on-board the Commodore Clipper in June 2010. It is said that the severity of the fire was increased by the electrical breakers not tripping when they should have. [2]

References

  1. ^ "CONDOR ISLANDER [BS]". Retrieved 29 April 2024.
  2. ^ "Commodore Clipper fire caused by 'electrical fault'". 18 July 2010.