Burst transmission
This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. (January 2013) |
In telecommunication, a burst transmission or data burst is the broadcast of a relatively high-bandwidth transmission over a short period.
Burst transmission can be intentional, broadcasting a compressed message at a very high data signaling rate within a very short transmission time.
In the 1980s, the term "data burst" (and "info burst")[1] was used for a technique used by some United Kingdom and South African TV programmes to transmit large amounts of primarily textual information. They would display multiple pages of text in rapid succession, usually at the end of the programme; viewers would videotape it and then read it later by playing it back using the pause button after each page.
Data bursts can occur naturally, such as when the download of data from the internet briefly experiences higher speeds. It can also occur in a computer network where data transmission is interrupted at intervals. Burst transmission enables communications between data terminal equipment (DTEs) and a data network operating at dissimilar data signaling rates.
An example of a Data Burst is the "Yosemite Sam Radio Transmission" where every time the broadcast sends out "Varmint im gonna blow you to smitherines" a very short data burst is sent right after the message. it is currently unknown what the use of the data burst is for.
See also
References
The Mysterious Yosemite Sam Radio Transmission
This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).