Jump to content

New Hope Railroad 40

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 71.173.74.218 (talk) at 15:59, 20 July 2024. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

New Hope Railroad 40
New Hope Railroad No. 40 at Deer Park, Pennsylvania
Type and origin
Power typeSteam
BuilderBaldwin Locomotive Works
Serial number58824
Model10-34-E
Build dateDecember 1925
Specifications
Configuration:
 • Whyte2-8-0
 • UIC1′D n2
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.50 in (1.270 m)
Adhesive weight142,000 lb (64.4 tonnes)
Loco weight160,000 lb (72.6 tonnes)
Fuel typeCoal
Fuel capacity16,000 lb (7.3 tonnes)
Water cap.6,000 US gallons (23,000 L; 5,000 imp gal)
Boiler pressure190 lbf/in2 (1.31 MPa)
Feedwater heaternone
Superheaternone
CylindersTwo
Cylinder size20 in × 26 in (508 mm × 660 mm)
Valve gearWalschaerts
Valve typePiston valves
Train heatingSteam
Train brakes6ET
Performance figures
Maximum speed45 mph (72 km/h)
Tractive effort32,700 lbf (145 kN)
Career
OperatorsLancaster and Chester Railroad,
Cliffside Railroad
New Hope Railroad
NicknamesOld Number 40

Baldwin 40

The Big Engine (Cliffside Railroad)
Delivered1925
Retired1962 (revenue service)
1979 (2nd retirement)
1986 (3rd retirement)
Restored1966 (1st restoration)
1981 (2nd restoration)
June 1991 (3rd restoration)
Current ownerNew Hope Railroad
DispositionOperational, based in New Hope, Pennsylvania

New Hope Railroad 40 is a 2-8-0 "Consolidation" type steam locomotive built in December 1925 by the Baldwin Locomotive Works for the Lancaster and Chester Railroad (L&C) in Lancaster, South Carolina. No. 40 is the only operating steam locomotive on the New Hope Railroad in New Hope, Pennsylvania. As of 2023, No. 40 is operational at the New Hope Railroad, pulling excursion trains.

History

Lancaster & Chester Railroad

No. 40 was ordered by the Lancaster and Chester Railroad of Lancaster, South Carolina from the Baldwin Locomotive Works for the price of $25,125.96. The locomotive was completed on December 2, 1925.[1] The locomotive was constructed at the Broad Street erecting hall of the Baldwin Locomotive Works in nearby Philadelphia, Pennsylvania, with final assembly happening at the Eddystone Plant. No. 40 was one of the final steam locomotives constructed at the Broad Street site. On December 3, the locomotive was brought by the Baltimore & Ohio Railroad from Philadelphia to Washington, D.C., where it was received by the Southern Railway who hauled it to the L&C's interchange in Catawba, South Carolina. The locomotive arrived at L&C on December 5. Being one of the railroad's largest engines, it was immediately put on the main train from Lancaster to Catawba.[citation needed]

Only 10 days after the locomotive's arrival, on December 15, No. 40 was involved in a wreck near Pleasant Hill, South Carolina, killing the locomotive's fireman and critically injuring the engineer. The wreck was determined to be the fault of the engineer, who refused to apply the train's air brakes, who preferred only using the locomotive's independent brakes. The pressure locked the drivers at 45mph, causing the No. 3 driver tire on the fireman's side to pop off and derail the locomotive. Little is known about this wreck as no photos of the wreck have been surfaced, but it is reported that the wreck destroyed approximately 500 ft of L&C's mainline. This wreck also destroyed No. 40’s original wooden pilot. The wreck resulted in the railroad shut down for 3 months. The Lancaster and Chester sued Baldwin Locomotive Works, resulting in an undisclosed settlement that in turn paid for the purchase of Lancaster & Chester No. 41, built by the American Locomotive Company and acquired secondhand. No. 40 was repaired and rebuilt by the railroad and re-entered service in Spring 1926. After the wreck, No. 40 was designated as a switcher for the various yards across the railroad.[citation needed]

Cliffside Railroad

In 1947, after L&C dieselized their entire roster, No. 40 was sold to the Cliffside Railroad, a short line in North Carolina.[2] During its entire tenure on the Cliffside, the relatively diminutive 80-ton 2-8-0 was the largest locomotive the railroad owned, earning it the nickname, "The Big Engine."[3] However, the locomotive was not used much as it was often overpowered for the small switching jobs and sharp track, compared to the smaller 2-6-2 also owned by the railroad. The locomotive was used by the railroad to mainly haul textile trains, waste product trains and scrap metal trains.[4]

New Hope Railroad

No. 40 awaiting to depart New Hope, Pennsylvania for the first run of the day on November 12, 2012

After being retired from the railroad in 1962, the Cliffside Railroad sold the 40 to Steam Trains Inc., located in New Hope, Pennsylvania. No. 40 was the first piece of equipment purchased by the group, in hoping to find a branch line to run it on. No. 40 was initially moved to Reading Company's yard in Wilmington, Delaware. The company initially planned to use the former Reading Company branchline located between Bridgeport, NJ and East Falls, PA. However, the Reading would be taken over by Conrail, and later, the Norfolk Southern would use the branchline other services. Fortunately, the Reading had another branchline that they had not used since 1954. The company decided to settle their operations in New Hope, PA. In the process, the company was renamed the New Hope & Ivyland Railroad. The No. 40 was then moved to the Reading Company shops in St. Clair, Pennsylvania with the rest of Steam Trains Inc.'s equipment. In 1966, Steam Trains Inc. was reorganized as the New Hope Railroad and moved all of its equipment, including 40, to the former Reading Company yard in New Hope, Pennsylvania. The No. 40 was restored to running condition in 1966, and with ex-Canadian National 4-6-0 No. 1533, ran excursion trains. [citation needed]

Even though 40 was operational at the time, it only saw limited service in the summer of 1967 as stablemate 1533 was reportedly easier to run and fire and was more popular with engine crews.[2] The locomotive also reportedly swayed from side to side even on straight track. This was would later be discovered due to an improper repair by the L&C of the third driver (and also a potential reason why Cliffside did not use the locomotive often).[citation needed] This would be corrected upon in the 1975 rebuild. From 1974-1975, 40 was rebuilt by the New Hope & Ivyland's new owners, the McHugh Brothers and returned to service and operated alongside the railroads third engine, former US Army 0-6-0 No. 9. [1]

In the late 1970s in addition to 40 being taken out of service for repairs, the New Hope and Ivyland's passenger operations were handed over to the newly formed New Hope Steam Railway. From 1981 to 1986, No. 40 shared excursion responsibilities with No. 9 during the late 1970s and early 1980s, and would operate both on and off home rails. During this time, the locomotive was the main workhorse for the railroad, due to No. 1533 being sidelined for an overhaul. One of its offline adventures took place in 1985 when it ventured down to the Fairless Works of U.S. Steel in nearby Morrisville, Pennsylvania. This journey was part of a weekend-long open house for plant employees and their families. No. 40 pulled the majority of their trains until the group's leadership changed in late 1986 and the No. 40 withdrawn from service.[5]

In 1990, the New Hope and Ivyland Railroad, now New Hope Railroad, came under new ownership and 40 was rebuilt to operational condition by shop forces from the Strasburg Rail Road, returning to operation in June 1991. The locomotive was taken out of service again in 2011 for some minor boiler work, but the No. 40 was eventually returned to service to pull excursion trains. In 2014, the locomotive was taken out of service for its 1,472 FRA mandated inspection and overhaul, eventually being returned to operating condition on November 24, 2017.[1] [2]

On May 18, 2019, No. 40 powered four excursions over the SEPTA Lansdale/Doylestown Line in Montgomery County between North Wales and Gwynedd Valley, Pennsylvania as part of North Wales Borough's Sesquicentennial celebrations.[6] This would be the locomotive's first trip on the mainline since 1985. As of 2023, the locomotive is operational, pulling excursion trains on the New Hope Railroad. It holds the claim as the only operational steam locomotive on the railroad.

See also

References

  1. ^ a b c "Steam Locomotive No. 40". New Hope & Ivyland Railroad.
  2. ^ a b c Balkin, Marc (2007). Ride the New Hope Line!. Mark I Videos.
  3. ^ "Old 40 rides again". Remember Cliffside. Cliffside Historical Society. 2010.
  4. ^ Wagner, Robert (2022-03-14). "New Hope #40, Alive Again In The Keystone State | Steam Giants". Retrieved 2023-06-18.
  5. ^ "Steam Locomotive No. 40". New Hope Railroad.
  6. ^ Lowndes, Rian (May 19, 2019). "All Aboard: North Wales celebrates 150 years on May 18". The Reporter. Archived from the original on February 6, 2021. Retrieved June 23, 2021.