Jump to content

Lock and Dam No. 1

Coordinates: 44°54′55″N 93°12′2″W / 44.91528°N 93.20056°W / 44.91528; -93.20056
From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Bruce1ee (talk | contribs) at 23:29, 18 October 2024 (fixed lint errors – stripped tags). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Lock and Dam No. 1 (Ford Dam)
Ford Lock and Dam
Lock and Dam No. 1 is located in Minnesota
Lock and Dam No. 1
Location of Lock and Dam No. 1 (Ford Dam) in Minnesota
LocationMinneapolis and Saint Paul, Minnesota, United States.
Coordinates44°54′55″N 93°12′2″W / 44.91528°N 93.20056°W / 44.91528; -93.20056
Opening dateLocks completed in 1932; 92 years ago (1932)
Operator(s) U.S. Army Corps of Engineers, St. Paul District
Dam and spillways
ImpoundsUpper Mississippi River
Length574 feet (175.0 m)
Reservoir
CreatesPool 1
Total capacity9,300 acre⋅ft (11,500,000 m3)
Catchment area19,400 sq mi (50,000 km2)

Ford Dam, officially known as Lock and Dam No. 1, is on the Upper Mississippi River and is located between Minneapolis and Saint Paul, Minnesota just north of the confluence of the Mississippi with the Minnesota River at Mississippi River mile 847.9, in Minneapolis. The powerhouse portion was previously owned by the Ford Motor Company, which operated a hydroelectric power station to feed electricity to its Twin Cities Assembly Plant on the east side of the river. It was sold to Brookfield Power Co. in April 2008. The dual-lock facility and dam was built and is operated by the St. Paul district of the U.S. Army Corps of Engineers' Mississippi Valley Division.[1][2][3]

lock and dam 1 tonnage
lock and dam 1 tonnage

Facility

[edit]

The first facility at the site went into operation in 1917 and superseded the role of the earlier Lock and Dam No. 2 (today known as the Meeker Island Lock and Dam). The facility was rebuilt in 1929, and an expansion from one lock to two locks was completed in 1932. Each lock is 56 feet (17 m) wide by 400 feet (120 m) long (17 × 122 meters), half the width of the next lock downstream, though this is the only dual-lock facility in the district. The lift is about 36 feet (11 m). Major rehabilitation efforts were carried out between 1978 and 1983, including the replacement of many manual and hydraulic components with computer controls.

The dam as seen from downstream

The eastern portion of the site consists of an overflow Ambursen dam, which is a buttress dam where the upstream part is a relatively thin flat slab usually made of reinforced concrete. The lift is 36 feet (11 m). There is an inflatable flashboard system on top of the dam that can increase the lift by 2 feet (0.61 m) when so desired. The lock side of the facility has a large observation area that is open from April to November each year. A bridge allows visitors to walk over the two locks and right up next to the dam.

When the facility opened, it assured a navigable channel up to the tail end of Saint Anthony Falls upriver in Minneapolis. Additional locks were added there in the 1960s, extending the head of navigation to a dam in Coon Rapids (which has no lock), until the closure of the Upper Saint Anthony Falls lock in 2015.

Just upstream of the dam is the Ford Parkway Bridge.

Repair

[edit]

In November 1958, extensive repairs to the dam began to correct serious leaking from one of the walls, which did not complete until the opening of river traffic in the spring of 1959. To prevent the underwashing of the entire structure, Ashbach Construction filled each wall crack and tunnel by Neoprin and concrete.[4]

Hydroelectric Power Production

[edit]

The Corps built a base for a hydroelectric plant in the 1917 dam but Federal law required that the plant not be built by the government. Ford built the powerhouse, completed 1924, to power an assembly plant Ford also built on top of the bluff adjacent to the plant.[5] The assembly plant closed in 2011 and the land is being redeveloped for residential and commercial uses. The powerhouse is 156 feet (48 m) long by 112 feet (34 m) wide and is built into the east end of the dam. It includes 4 turbines and generators with a total capacity of 17,920 kW using 7,000 cfs of water. It generates about 97,100 megawatt-hours (MWh) a year. Before the closure of the assembly plant, the powerhouse supplied all the electricity to the assembly plant, plus free power to the lock and dam, and 22,000 MWh (22%) was sold to the local power grid.[6] Since the closure of the assembly plant and subsequent purchase of the powerhouse by Brookfield Renewable Power Inc. in 2008 all electricity generated at the facility has been sold on the wholesale market.[7]

[edit]
Ford Lock and Dam

See also

[edit]

References

[edit]
  1. ^ USACE St. Paul District: Lock and Dam No. 1
  2. ^ Anfinson, John. "The Secret History of the Mississippi's Earliest Locks and Dams" (PDF). Minnesota History (Summer 1995). Retrieved July 1, 2021.
  3. ^ Anfinson, John O. (August 1993). "Mississippi River 9-Foot Channel, Lock & Dam No. 1" (PDF). Historic American Engineering Record. Washington, D.C.: Library of Congress. Retrieved September 25, 2021.
  4. ^ "Oral interview with Jean Ashback-Swanson" (PDF). Minnesota Historical Society.
  5. ^ Anfinson 1995, p. 265-266.
  6. ^ Ford Motor Company Twin Cities powerplant license renewal. Federal Energy Regulatory Commission. November 18, 2004.
  7. ^ "Twin Cities Assembly Plant Hydroelectric Dam". City of Saint Paul. Retrieved 2021-01-16.

Public Domain This article incorporates public domain material from Mississippi River - Pool 1. Federal government of the United States.

Public Domain This article incorporates public domain material from websites or documents of the United States Army.

Public Domain This article incorporates public domain material from websites or documents of the Library of Congress.

Further reading

[edit]
[edit]