DX number

This article is about film emulsion identifiers. For Document Exchange mail, courier and logistics in the United Kingdom, see DX Group.

DX I2/5 barcode on a 135 film cartridge; this is a 24-exposure roll of Fujicolor Superia Venus 400

The DX number is a number which uniquely identifies the type and manufacturer (sensitizer) of a film emulsion. These DX numbers were assigned by the International Imaging Industry Association (I3A), which published and sold a proprietary list of DX numbers for APS and 135 film yearly or as needed. The last edition of the list, entitled DX Codes for 135-Size Film, was published in January 2009.

DX number composition

A DX number has two parts separated by a dash: CCC-SS

1. CCC is the "combination code", also known as "DX Number Part 1", which identifies the manufacturer and emulsion type
2. SS is the "specifier number", or "DX Number Part 2", which distinguishes between different varieties within the same family of emulsions

For example, Agfa Perutz 3-color ISO 200/24° film is assigned 115-4, while the equivalent Perutz 3-color ISO 100/21° film is assigned 115-3.

DX Part 1

Part 1 No.	Assignee
0	—
1	Agfa-Gevaert
2	Konica Minolta
3	Agfa-Gevaert
4	Eastman Kodak
5	Agfa-Gevaert
6	Eastman Kodak
7	Agfa-Gevaert
8	Fujifilm
9	Svema
10	Fujifilm
11	Eastman Kodak
12	Fujifilm
13	Eastman Kodak
14	Eastman Kodak
15	Ferrania
16	Konica Minolta
17	Agfa-Gevaert
18	Ferrania
19	Eastman Kodak
20	Eastman Kodak
21	— (was Tudor)
22	— (was Tudor)
23	Eastman Kodak
24	Ferrania

DX Part 1

Part 1 No.	Assignee
25	Konica Minolta
26	Konica Minolta
27	—
28	Konica Minolta
29	—
30	Konica Minolta
31	Agfa-Gevaert
32	Fujifilm
33	Fujifilm (APS)
34	Fujifilm
35	Fujifilm
36	Fujifilm
37	Fujifilm (APS)
38	Fujifilm (APS)
39	Fujifilm
40	Konica Minolta
41	—
42	Fujifilm
43	Eastman Kodak
44	Agfa-Gevaert (APS)
45	Agfa-Gevaert (APS)
46	Agfa-Gevaert
47	Agfa-Gevaert
48	Konica Minolta
49	Agfa-Gevaert

DX Part 1

Part 1 No.	Assignee
50	Konica Minolta
51	Agfa-Gevaert
52	Eastman Kodak
53	Eastman Kodak
54	—
55	—
56	—
57	—
58	—
59	—
60	China Lucky Film
61	—
62	—
63	—
64	Eastman Kodak
65	— (was 3M)
66	Ferrania
67	Eastman Kodak
68	Era Photo
69	—
70	Eastman Kodak
71	—
72	Konica Minolta (APS)
73	—
74	—

DX Part 1

Part 1 No.	Assignee
75	—
76	—
77	Konica Minolta
78	Eastman Kodak
79	Eastman Kodak
80	Eastman Kodak
81	Eastman Kodak
82	Eastman Kodak
83	Eastman Kodak
84	Eastman Kodak
85	Ferrania
86	Ferrania (APS)
87	Ferrania
88	Shanghai General
89	—
90	China Lucky Film
91	Eastman Kodak (APS)
92	Eastman Kodak
93	Eastman Kodak
94	Eastman Kodak (APS)
95	Eastman Kodak
96	Eastman Kodak
97	Eastman Kodak
98	Xiamen Fuda
99	—

DX Part 1

Part 1 No.	Assignee
100	China Lucky Film
101	—
102	—
103	—
104	—
105	Ilford Photo
106	Ilford Photo
107	Ilford Photo
108	Ilford Photo
109	Ilford Photo
110	Ilford Photo
111	—
112	Eastman Kodak
113	Agfa-Gevaert
114	—
115	Agfa-Gevaert
116	Eastman Kodak
117	—
118	—
119	— (was ORWO)
120	ORWO Media
121	ORWO Media
122	ORWO Media
123	ORWO Media
124	—

Encoding

DX film canister barcode

Codes on Kodak ISO 400 color print film

The DX film canister barcode is printed in human-readable text and also represented as an Interleaved 2 of 5 barcode, located between the electrically read silver and black DX Camera Auto-Sensing Code and the film cartridge exit lip. The size and position conform to the ANSI/NAPM IT1.14:1994 standard. Some film-processing machines optically scan the barcode when the cartridge is inserted for developing.

This film canister barcode is a six-digit number in the format PHHHHE, where:

• P = proprietary prefix ranging from 0 to 9, assigned by the manufacturer
• HHHH = hashed DX number
• E = suffix identifying the number of exposures

For 135 film cartridges the DX number is hashed to produce the four-digit code HHHH. To generate this code, the combination code (aka DX Number Part 1) is multiplied by 16 and added to the specifier number (aka DX Number Part 2). The result is prefixed with zeroes, if necessary, to make four digits. For the Agfa film assigned DX number 115-4 above, the hashed 4-digit code would be 1844:

$16\times 115+4=1844$

The suffix digit E is a code digit for the number of full-frame exposures: 1 is for 12 exposures, 2 for 20 exposures, 3 for 24, 4 for 36, 5 for 48, 6 for 60, 0 for 72 and 7 for non-standard lengths such as 24 + 3.

DX film edge barcode

Film edge barcodes, below bottom sprocket holes; exposed Kodak BW400CN (black-and-white chromogenic) film, DX number 79-15

Most film produced since 1983 contains barcodes along the bottom edge of the film, recorded in two parallel tracks. The upper track (closer to the sprocket holes) is called the "clock track" and the lower track (along the edge of the film) is called the "data track"; the data track contains the unhashed DX number. However, unlike the film canister DX number bar code, each frame or half-frame's data track code does not provide information about the total number of frames available in the roll.

The data track consists of:

• A six-bit entry code
• A seven-bit film product class identification array (DX Number Part 1)
• One unassigned bit, left blank
• A four-bit film specifier array (DX Number Part 2)
• A six-bit frame number
• One bit to indicate if the position is a "half-frame"
• A second unassigned bit, left blank
• A parity bit
• A four-bit exit code

This information identifies manufacturers and chemistry associated with their various film types. If the manufacturer and type of film negative is unknown, the data track can be examined to identify this information.

Sample data track code

Position:					1	2	3	4	5	6	7	8	—	9	10	11	12	13	14	15	16	17	18	19	—
1	0	1	0	1	0	1	0	0	1	1	1	1	0	1	1	1	1	0	1	0	1	1	1	0	0	1	0	1	0	1
Entry code						Film product class (79 in this example)							—	Film specifier (e.g., 15)				Frame no. (e.g., 23)						Half- frame	—	Parity	Exit code

For the encoded numerals, the most significant digit is on the left and the least significant digit is on the right; in this example, the film class is a seven-bit number encoded in positions 2 through 8; position 8 is the least significant digit, and position 2 is the most significant digit, so the number encoded is 79 (base-10). The parity bit is set or left blank to ensure the total number of "1" bits in positions 1 through 12 plus the parity bit is even. In this example, there are nine "1" bits in positions 1 through 12, so the parity bit is set.

See also

• DX encoding

Further reading

• "Film Emulsion Codes" (PDF). 1.14. evertz. 2012-05-01. Archived (PDF) from the original on 2017-06-09. Retrieved 2019-06-09.

External links

• A database of DX numbers