Jump to content

Ken Kundert

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by GerhardNel29 (talk | contribs) at 17:42, 20 November 2024 (Made the language more clear). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Kenneth S. Kundert

Kenneth S. Kundert is an engineer who is most well known for his work in the area of Electronic Design Automation (EDA). He studied electrical engineering at the University of California, Berkeley under professors Alberto Sangiovanni-Vincentelli and Robert G. Meyer and received his doctorate in 1989. During this time, he created the circuit simulator that eventually became the Advanced Design System from what is now PathWave Design and the Spectre circuit simulator from Cadence Design Systems.

Kundert co-founded Designer's Guide Consulting and created the Designer's Guide Community. From 1989 to 2005 he was a Fellow at Cadence Design Systems during which time he was the principal architect of the Spectre circuit simulation family. As such, he has led the development of Spectre, SpectreHDL, and SpectreRF. He was also the primary developer of Verilog-A[1] and made substantial contributions to both the Verilog-AMS[2] and VHDL-AMS languages. He has written three books on circuit simulation: The Designer's Guide to Verilog-AMS,[3] The Designer's Guide to SPICE and Spectre,[4] and Steady-State Methods for Simulating Analog and Microwave Circuits.[5]

Since 2005, Kundert, along with Henry Chang, has worked to develop the field of analog verification.[6]

More recently Kundert has developed a number of notable open source software packages,[7] including NestedText.

Kundert was elevated to the status of IEEE Fellow in 2007 for contributions to the simulation and modeling of analog, RF, and mixed-signal circuits.[8] In 2022 he, along with Ricardo Telichevesky and Jacob K. White, was awarded the ACM/IEEE A. Richard Newton Technical Impact Award in Electronic Design Automation for their paper Efficient steady-state analysis based on matrix-free Krylov-subspace methods.[9]

References

[edit]
  1. ^ Verilog-A Language Reference Manual
  2. ^ Verilog-AMS Language Reference Manual
  3. ^ Ken Kundert. The Designer's Guide to Verilog-AMS. Kluwer Academic Publishers, 2004.
  4. ^ Ken Kundert. The Designer's Guide to SPICE and Spectre. Kluwer Academic Publishers, 1995.
  5. ^ Kundert, K. S., White. J. K., and Sangiovanni-Vincentelli, A., Steady-state Methods for Simulating Analog and Microwave Circuits, Kluwer Academic Publishers, Boston, 1990.
  6. ^ Henry Chang and Ken Kundert. Verification of Complex Analog and RF IC Designs. Proceedings of the IEEE, vol. 95, no. 3, pp. 622-639 , March 2007.
  7. ^ Kundert's GitHub account
  8. ^ IEEE Fellows of 2007 Archived 2012-05-10 at the Wayback Machine
  9. ^ Telichevesky, R.; Kundert, K. S.; White, J. K. (1995). "Efficient steady-state analysis based on matrix-free Krylov-subspace methods". Proc. 32nd ACM IEEE Design Automation Conference, San Francisco. pp. 480–484. doi:10.1145/217474.217574.
[edit]