Jump to content

Atari 2600

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by JamesTabfield (talk | contribs) at 00:42, 11 October 2007 (Fixed Grammar Issue with 2600; It referred to 5200 (last noun)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Atari 2600
Atari 2600 four-switch "wood veneer" version, while the original 2600 had six switches.
ManufacturerAtari
TypeVideo game console
GenerationSecond generation
LifespanUnited States October 1977
United Kingdom 1978
France 1980
Germany March 1981
Japan 1983
Brazil 1983
Units sold+/- 40 million units[verification needed]
MediaCartridge
CPUMOS 6507 @ 1.19 MHz
Controller inputJoystick
Paddles
Driving Controller
Trak-Ball
Keypad
Best-selling gamePac Man
PredecessorAtari Pong
SuccessorAtari 5200

The Atari 2600, released in October 1977, is the video game console credited with popularizing the use of microprocessor based hardware and cartridges containing game code, instead of having non-microprocessor dedicated hardware with all games built in. The first game console to use this format was the Fairchild Channel F. However, it was the Atari 2600 that made the plug-in concept popular among the game-playing public. Originally known as the Atari VCS—for Video Computer System—the machine's name was changed to "Atari 2600" (from the unit's Atari part number, CX2600) in 1982, after the release of the more advanced Atari 5200. The Atari 2600 was wildly successful, and during the 1980s, "Atari" was a synonym for this model in mainstream media. The 2600 was typically bundled with two joystick controllers, a conjoined pair of paddle controllers, and a cartridge game—initially Combat and subsequently Pac-Man.[citation needed]

History

Development and market considerations

Atari had purchased an engineering think-tank in 1973 called Cyan Engineering to research next-generation video game systems, and had been working on a prototype known as "Stella" (named after one of the engineers' bicycles) for some time. Unlike prior generations of machines which used custom logic to play a small number of games, Stella's core was a complete CPU, the famous MOS Technology 6502 in a cost-reduced version, known as the 6507. It was combined with a RAM-and-I/O chip, the MOS Technology 6532, and a display and sound chip of their own design known as the TIA, for Television Interface Adaptor. Beyond those three, the first two versions of the machine contain just one more chip, a standard CMOS logic buffer IC, bringing the total chip count to the very low and cost-effective number of four. Some later versions of the console eliminated the buffer chip.

Programs for small computers were generally stored on cassette tape, disk, or paper tape. By the early 1970s, Hewlett Packard manufactured desktop computers costing thousands of dollars such as the HP 9830 which packaged ROM memory into removeable catridges to add special programming features, and these were being considered for use in games. At first the design was not going to be cartridge-based, but after seeing a "fake" cartridge system on another machine, they realized they could place the games on cartridges essentially for the price of the connector and packaging.

In August 1976, Fairchild Semiconductor released their own CPU-based system, the Video Entertainment System. Stella was still not ready for production, but it was clear that it needed to be before there were a number of "me too" products filling up the market – which had happened after they released Pong. Atari simply didn't have the cash flow to complete the system quickly, given that sales of their own Pong systems were cooling. Nolan Bushnell eventually turned to Warner Communications, and sold the company to them in 1976 for US$28 million on the promise that Stella would be produced as soon as possible.

Key to the eventual success of the machine was the hiring of Jay Miner, a chip designer who managed to squeeze an entire breadboard of equipment making up the TIA into a single chip. Once that was completed and debugged the system was ready for shipping. By the time it was released in 1977, the development had cost about US$100 million.

Launch and runaway success

The initial price was US$199 with a library of 9 titles. In a move to compete directly with the Channel F, Atari named the machine the Video Computer System (or VCS for short), as the Channel F was at that point known as the VES, for Video Entertainment System. The 2600 was also rebadged as the Sears Video Arcade and sold through Sears, Roebuck and Company stores. When Fairchild learned of Atari's naming, they quickly changed the name of their system to become the Channel F. However, both systems were now in the midst of a vicious round of price-cutting: Pong clones made obsolete by these newer and more powerful machines sold off their boxes to discounters for ever-lower prices. Soon many of the clone companies were out of business, and both Fairchild and Atari were selling to a public that was completely burnt out on Pong. In 1977, Atari sold only 250,000 VCSs. For the first year of production, the 2600 was manufactured in Sunnyvale, California. The consoles manufactured here had thick internal RF shielding & thick plastic molding around the sides & bottom. These added weight to the console, and being that all 6 switches were on the front, these consoles were nicknamed "Heavy Sixers". After this first year, production moved to Hong Kong, and the consoles manufactured there had thinner RF shielding & plastic molding. In 1978, only 550,000 units from a production run of 800,000 were sold, requiring further financial support from Warner to cover losses. This led directly to the disagreements that caused Atari founder Nolan Bushnell to leave the company in 1978.[original research?]

Once the public realized it was possible to play video games other than Pong, and programmers learned how to push its hardware's capabilities, the 2600 gained popularity. By this point, Fairchild had given up, thinking video games were a passed fad -- thereby handing the entire quickly growing market to Atari. By 1979, the 2600 was the best-selling Christmas present (and console), mainly because of its exclusive content, and a million were sold that year.


Atari then licensed the smash arcade hit Space Invaders by Taito, which greatly increased the unit's popularity when it was released in January 1980, doubling sales again to over 2 million units. The 2600 and its cartridges were the main factor behind Atari grossing more than $2 billion in profits in 1980. Sales then doubled again for the next two years, with almost 8 million units selling in 1982.

In 1980, the Atari 2600 was given a minor revision in which the left and right difficulty switches were moved to the back of the console, leaving 4 switches on the front. Other than this, these 4-switch consoles looked nearly identical to the earlier 6-switch models. In 1982, another version of the 4-switch console was released without woodgrain. They were nicknamed "Darth Vader" consoles due to their all-black appearance. These were also the first consoles to be officially called "Atari 2600", as the Atari 5200 was released the same year.

During this period, Atari expanded the 2600 family with two other compatible consoles. They designed the Atari 2700, a wireless version of the console that was never released because of a design flaw.[1] The company also built a sleeker version of the machine dubbed the Atari 2800 to sell directly to the Japanese market in early 1983, but it suffered from competition with the newly released Nintendo Famicom.

Sears Tele-Games 2600's

Atari also continued their OEM relationship with Sears under the latter's Tele-Games brand label started in 1975 with the original Pong. Sears released several versions of the 2600 as the Sears Video Arcade series from 1977 to 1983. These include the the Rev. A "Heavy Sixer" model in 1977, the Rev. B "4 switch" model in 1980, and the US version of the Atari 2800 branded as the Sears Video Arcade II in 1983.[1] Sears also released their own versions of Atari's games under the Tele-Games brand, which included the Tele-Games branded variations of text and picture labels. Three games were also produced by Atari for Sears as exclusive releases under the Tele-Games brand: Steeplechase, Stellar Track, Submarine Commander. [2]

Decline

During this period, Atari continued to grow until it had one of the largest R&D divisions in Silicon Valley. It spent much of its R&D budget on projects that seemed rather out of place at a video game (or even home computer) company; many of these projects never saw the light of day. Meanwhile, several attempts to bring out newer consoles failed for one reason or another, although Atari's home computer systems, the Atari 8-bit family, sold reasonably, if not spectacularly. Warner was more than happy anyway, as it seemed to have no end to the sales of the 2600, and Atari was responsible for over half of the company's income.

File:PacManCrt260007052004.jpg
2600 Pac Man cartridge

The programmers of many of Atari's biggest hits grew disgruntled with the company for not crediting game developers and many left the company and formed their own independent software companies. The most prominent and longest-lasting of these third-party developers was Activision, founded in 1980, whose titles quickly became more popular than those of Atari itself. Atari attempted to block third-party development for the 2600 in court but failed, and soon other publishers, such as Imagic and Coleco, entered the market. Atari suffered from an image problem when a company named Mystique produced a number of pornographic games for the 2600. The most notorious of these, Custer's Revenge, caused a large number of protests from women's and Native American groups because it depicts General George Armstrong Custer raping a bounded Native American woman. Atari sued Mystique in court over the release of the game.

Atari continued to scoop up licenses during the shelf life of the 2600, the most prominent of which included Pac-Man and E.T. Public disappointment with these two titles and the market saturation of poor third-party titles are cited as big reasons for the video game crash of 1983. Suddenly, Atari's growth meant it was losing massive amounts of money during the crash, at one point about $10,000 a day. Warner quickly grew tired of supporting Atari, and started looking for buyers in 1984.

The console that refused to die

Atari 2600 in its 1986 cost-reduced version, also known as the "2600 Jr."

Although not formally discontinued, the 2600 was de-emphasized for two years after Warner's 1984 sale of Atari's Consumer Division to Commodore Business Machines founder Jack Tramiel, who wanted to concentrate on home computers. In 1986, a new version of the 2600 was released (although it was planned for release two years earlier). The new redesigned version of the 2600, unofficially referred to as the 2600 Jr., featured a smaller cost-reduced form factor with a modernized Atari 7800-like appearance. The redesigned 2600 was advertised as a budget gaming system (under $50) that had the ability to run a large collection of classic games. With its introduction came a resurgence in software development both from Atari and from a few third parties (notably, Activision, Absolute Entertainment, Froggo, Epyx, and Exus). The Atari 2600 continued to sell in the USA and Europe until 1990, and in Asia until the early 1990s. Its final Atari-licensed release was KLAX in 1990. Over its lifetime, an estimated 40 million units were shipped, and its video game library reportedly numbers more than 900 titles with commercial games released for this system all the way until 1991. In Brazil, the console became extremely popular in the mid-1980s. The Atari 2600 was officially retired by Atari on January 1, 1992, making it the longest-lived home video game console in US game history. It had a lifespan of 14 years and 2 months, nearly three times the typical lifespan of a console.

At the turn of the millennium, 25-years-plus after the launch of the Atari 2600, new homebrew games for the system are still made and sold by hobbyists with several new titles available each year. The console and its old and new games are very popular with collectors because of its significant impact on video game and consumer electronics history and also due to its nostalgic value for many people. In addition, modern Atari 2600 clones remain on the market. One example is the Atari Classics 10-in-1 TV Game, manufactured by Jakks Pacific, which simulates the 2600 console, and includes converted versions of 10 games into a single Atari-brand-look-a-like joystick with composite video outputs for connecting directly to modern televisions or VCRs. Another is the TV Boy, which includes 127 games in an enlarged joypad.

Additionally, Benjamin Heckendorn has created several different versions of a portable 2600, created by cutting apart full-sized vintage units, adding screens and putting them into new enclosures.

The Atari Flashback 2 console, released in 2005, contains 40 games (with four more programs unlockable by a cheat code). The console implements the original 2600 architecture and can be modified to play original 2600 cartridges by adding a cartridge port, and is compatible with original 2600 controllers.

The Atari insignia has become an iconic pop cultural logo.

Atari 2600 in music

Many games for the Atari 2600 have detailed and easily identifiable music, and its distinctive sound makes it ideal for use in modern lo-fi and industrial music. In 2002, Dallas musician and visual artist Paul Slocum developed a cartridge called Synthcart for the Atari 2600, which allows the user to turn an Atari 2600 into a 2 voice synthesizer and drum machine. Adapters have also been developed by amateurs enabling the Atari 2600's use with MIDI devices. A number of bands, such as 8 Bit Weapon, Bud Mevlin, TEMPHUiBIS and The Squigs, as well as Slocum's own band TreeWave, use Synthcart to make modern music on the Atari 2600.[citation needed]

Emulation

Atari 2600 emulation is available for most major operating systems and is now very accurate. Despite the relative simplicity of the 2600 system, it is not a simple system to emulate. While it does not require lots of computational power to emulate the 2600, it is hard to accurately do so. For example, because of the lack of a frame buffer (discussed below), 2600 emulators must not only emulate the console, but the television as well. Due to the longevity of the system, many 2600 games used undocumented features, and even exploited bugs in the hardware and firmware to harness the most of the system, doing things even the original designers would deem impossible (a notable example is the starfield of the game Cosmic Ark). It took some time for the emulator programmers to mature their software to properly emulate the undocumented features, bugs and quirks of the system.

The MESS emulator supports recording and playing back of Atari 2600 emulation sessions. The Home Action Replay Page (aka HARP) allows Atari 2600 users to archive their favorite play sessions of the Atari 2600 system and its games.

Some well known Atari 2600 emulators today are:

  • Stella - An open source, multiplatform, very popular emulator (Windows, Mac OS X, Linux) .
  • z26 - Another open source, multiplatform, very popular and customizable emulator (Windows, MS-DOS, Linux)
  • PC Atari Emulator - Easy to use, very fast and popular emulator (Windows, MS-DOS). Handles the Cosmic Ark starfield effect correctly.
  • MESS - the multi system emulator that supports all old Atari console systems
  • The Pocket VCS - PPC - Easy to use, very fast and popular emulator (Windows CE).

Description

2600 game cartridge innards: basically a circuit board with a ROM chip (center) and dual-sided 24-pin edge connector (bottom).

The basic layout of the 2600 is fairly similar to most consoles and home computers of the era. The CPU was the MOS Technology 6507, a cut-down version of the 6502, running at 1.19 MHz in the 2600. The 6507 included fewer memory address pins — 13 instead of 16 — and no external interrupts to fit into a smaller 28-pin package. Smaller packaging was, and still is, an important factor in overall system cost, and since memory was very expensive at the time, the 6507's small 8 kb of maximum external memory space wasn't going to be used up anyway. In fact, memory was so expensive they couldn't imagine using up even 4K, and when they got a deal on 24-pin connectors for the cartridge socket, they were only too happy to thereby limit the games to 4K.[3] Later games got around this limitation with bank switching.

The console had only 128 bytes of RAM for runtime data that included the call stack and the state of the game world. There was no frame buffer, as the necessary RAM would have been too expensive. Instead the video device had two bitmapped sprites, two one-line "missile" sprites, a one-pixel "ball," and a "playfield" that was drawn by writing a bit pattern for each line into a register just before the television scanned that line. As each line was scanned, a game had to identify the non-sprite objects that overlapped the next line, assemble the appropriate bit patterns to draw for those objects, and write the pattern into the register. By default the right side of the screen was a duplicate of the left; to control it separately, the software had to modify the patterns as the scan line was drawn. After the controller scanned the last active line, a more leisurely vertical blanking interval began, during which the game could process input and update the positions and states of objects in the world. Any mistake in timing produced visual artifacts, a problem programmers called racing the beam.

The video hardware gave the 2600 a reputation as one of the most complex machines in the world to program, but those programmers who understood it realized that such direct control over the video picture was also a source of flexibility. One advantage the 2600 had over more powerful competitors such as the ColecoVision was that the 2600 had no protection against altering settings in mid-line. For example, although each sprite nominally had only one color, it was possible to color the rows differently by changing the sprite's color as it was drawn. If the two hardware sprites were not enough for a game, a developer could share one sprite among several objects (as with the ghosts in Pac-Man) or draw software sprites, which was only a little more difficult than drawing a fixed playfield. The Pitfall! screen shot below demonstrates some of these tricks: the player is a multi-color sprite, one sprite is multiplexed for the logs and the scorpion, and the swinging vine is drawn by software. Despite the hardware limitations, many Atari 2600 games had a lot of action on the screen, creating an engaging experience.

Notable games

A comprehensive alphabetical list of games is given in the article List of Atari 2600 games

Technical specifications

Console hardware

  • CPU: 1.19 MHz MOS Technology 6507
  • Audio + Video processor: TIA. 160 x ~192 pixel, 128 colors (128 on screen. Max 4 per line without tricks), 2 channel mono sound.
  • RAM (within a MOS Technology RIOT chip): 128 bytes (additional RAM may be included in the game cartridges)
  • ROM (game cartridges): 4 kb maximum capacity (32 kb+ with bank switching)
  • Input (controlled by MOS RIOT):
    • Two screwless DE-9[4] controller ports, for single-button joysticks, paddles, "trakballs", "driving controllers", 12-key "keyboard controllers" (0–9, #, and *) and third party controllers with additional functions
    • Six switches (original version): Power on/off, TV signal (B/W or Color), Difficulty for each player (called A and B), Select, and Reset. Except for the power switch, games could (and did) assign other meanings to the switches. On later models the difficulty switches were miniaturized and moved to the back of the unit.
  • Output: B/W or Color TV picture and sound signal through RCA connector (NTSC, PAL or SECAM, depending on region; game cartridges are exchangeable between NTSC and PAL/SECAM machines, but this will result in wrong or missing colors and often a rolling picture.)

Color palette

The Atari 2600 used different color palettes dependent on the television signal format used.[5] With the NTSC format, a 128-color palette was available:

hue / luminance 0 2 4 6 8 10 12 14
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

With the PAL format, a 104-color palette was available:

hue / luminance 0 2 4 6 8 10 12 14
0,1,14,15
2
3
4
5
6
7
8
9
10
11
12
13

The SECAM palette contained 8 colors:

0 2 4 6 8 10 12 14

Third-party peripherals

  • Gameline Master Module, a modem allowing downloads of games from an extensive catalog which could be playable for a limited amount of time.
  • Yoko Game Copier, a device that allows you to copy the ROM from a cartridge to a blank cartridge.The Yoko Game Copier was distributed by C.K.B. in Europe.

References and notes

  1. ^ Yarusso, Albert. "AtariAge - 2600 Consoles and Clones". atariage.com. Retrieved 2007-10-07.
  2. ^ Yarusso, Albert. "Atari 2600 - Sears - Picture Label Variation". atariage.com. Retrieved 2007-10-07.
  3. ^ The cartridge connector's 24 pins were allocated to one supply voltage line, two ground lines, 8 data lines, and 13 address lines. However, the uppermost address line was used as a so-called chip select for the cartridge's ROM chip, leaving only 12 address lines for the chip's game program. Thus, without special "hardware tricks" built into the cartridge, an Atari 2600 game could occupy a maximum address space of 4K.
  4. ^ The screwless DE-9 controller ports subsequently became the mechanical/electrical de facto standard for game controllers in the 8-bit and early 16-bit era and were used in most subsequent Atari and Commodore consoles and home computers, among many others including the Sega Genesis.
  5. ^ Atari 2600 "TIA color chart".

Also the Atari joysticks could be used in MSX and several Japanese computers. It is possible to use the joysticks in Sega systems like the Sega Master System or Sega Genesis in games that only require one button.

  • Perry, Tekla; Wallich, Paul. "Design case history: the Atari Video Computer System". IEEE Spectrum. March 1983.

See also

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Atari_2600&oldid=163698806"