Jump to content

File:SpaceElevatorCableTaperPlot3D.svg

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Hologram0110 (talk | contribs) at 17:57, 25 May 2008 ({{Information |Description= 3D Plot of required relative cable area as a function of material Strength/Density and height above the earth |Source=I created this image entirely by myself. The math was done in Maple 11, the plot generated in Matlab saved in). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

Original file (SVG file, nominally 960 × 645 pixels, file size: 58 KB)

Summary

File information
Description

3D Plot of required relative cable area as a function of material Strength/Density and height above the earth

Source

I created this image entirely by myself. The math was done in Maple 11, the plot generated in Matlab saved in AI format, which was then converted to SVG format in Adobe Illustrator.

Date

May-25-2008

Author

Hologram0110 (talk)

Permission
(Reusing this file)

See below.

Other versions Non-vector version: SpaceElevatorCableTaper3DPlot2.jpg

Licensing:

I, the copyright holder of this work, hereby publish it under the following licenses:
You may select the license of your choice.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:28, 25 April 2022Thumbnail for version as of 21:28, 25 April 2022960 × 645 (58 KB)LucasKannou (talk | contribs)Fixing the SVG source code.
17:57, 25 May 2008Thumbnail for version as of 17:57, 25 May 2008960 × 645 (6.04 MB)Hologram0110 (talk | contribs){{Information |Description= 3D Plot of required relative cable area as a function of material Strength/Density and height above the earth |Source=I created this image entirely by myself. The math was done in Maple 11, the plot generated in Matlab saved in
No pages on the English Wikipedia use this file (pages on other projects are not listed).

Metadata