Baker Street Mill, Orsett
Baker Street Mill (TQ 633 813 51°30′22″N 0°21′11″E / 51.506°N 0.353°E) is a grade II* listed[1] Smock mill at Orsett, Essex, England which has been converted to residential use.
History
Baker Street Mill is said to have been built in 1765, although a date of 1762 is recorded in the mill. The earliest firm reference for the mill is 1796, this from a sale notice in 1808. It is likely that the mill was raised a storey between 1762 and 1814. The mill was working by wind until 1914. A steam mill was built near the mill towards the end of its working life. A new boiler being supplied in 1906.[2]
The mill gradually became more and more derelict, losing two sails in 1926 to a lightning strike. The windmill and steam mill were converted to residential accommodation in 1982.[2]
Description
Baker Street Mill is a three storey smock mill on a two storey brick base, with a stage at first floor level. The mill had four double Patent sails and the Kentish style cap is winded by a fantail.[2]
Mill
‘’Baker Street Mill’’ has an octagonal two storey brick base. The walls of which are almost 3 feet (914 mm) thick at ground level. The base is 20 feet 4 inches (6.20 m) across the flats and 48 feet 6 inches (14.78 m) high, the brickwork at the top of the base is about 18 inches (457 mm) thick. [3]
The smock is 21 feet 8 inches (6.60 m) from sill to curb. The mill is 11 feet (3.35 m) diameter at the curb, the cant posts being about 10 inches (254 mm) square. The stage is at first floor level, 8 feet 6 inches (2.59 m) above the ground.[3]
The cap is of Kentish style, with blisters for the Brake Wheel., with an overall height of some 8 feet (2.44 m), giving the mill an overall height of about 46 feet 6 inches (14.17 m). Winding is by an eight-bladed fantail, although originally the mill was winded by hand.[3]
Sails and Windshaft
Baker Street Mill has a cast iron windshaft and four double Patent sails. The windshaft was originally a wooden one. The last working sails were an odd pair, the outer pair having eight bays of four shutters and one bay of three, the inner pair having eleven bays of three shutters.[3]
Machinery
The wooden Brake Wheel is of clasp arm construction, 8 feet (2.44 m) diameter. It has been converted from compass arm construction. The rim is of elm. [3] The Wallower is wooden, as is the Upright Shaft. The compass arm Great Spur Wheel is 7 feet (2.13 m) diameter, and has six arms. The mill originally worked two pairs of overdrift millstones, with a third pair being added later. [3]
Fantail
Baker Street Mill was winded by an eight-bladed fantail, replacing the original hand winding by means of a Y wheel and chain, which was retained as a standby method of winding the mill.
Millers
- James Woollings 1830 - 1839
- William Woolings 1848 - 1886
- Emma Woolings 1890 - 1894
- Thomas Ridgewell 1898
- Christopher Moore 1902
- Arthur William Cocks 1908
- William Scott 1910
- H Lindsey 1912
References for above:-[2]
External links
- Windmill World webpage on Baker Street Mill
References
- ^ "RAMSEY WINDMILL, THE STREET (north side), RAMSEY AND PARKESTON, TENDRING, ESSEX". English Heritage. Retrieved 2008-06-11.
- ^ a b c d Farries, Kenneth (1985). Essex Windmills, Millers and Millwrights - Volume Four- A Review by Parishes, F-R. Edinburgh: Charles Skilton. ISBN 0 284 98642 9.
{{cite book}}: Cite has empty unknown parameter:|month=(help); Text "pages 93-94" ignored (help) - ^ a b c d e f Farries, Kenneth (1984). Essex Windmills, Millers and Millwrights - Volume Two - A Technical Review. Edinburgh: Charles Skilton. pp. p46-52. ISBN 0 284 98637 2.
{{cite book}}:|pages=has extra text (help); Cite has empty unknown parameter:|month=(help)