Jump to content

User:Dpbsmith/prescription

From Wikipedia, the free encyclopedia
< User:Dpbsmith

This is an old revision of this page, as edited by Dpbsmith (talk | contribs) at 01:30, 2 March 2004. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Under construction

This article describes the optics of an ordinary eyeglass prescription, which is used to correct small refractive errors in the optical system of the eye. The effect of these errors is to create a blurred image. By correcting these errors, the eyeglass lens removes the blur.

Abbreviations

  • Rx means prescription and is derived from the abbreviation "rx" from the Latin word recipire, "to take." Literally, Rx is an instruction to the patient "to take" what is specified in the prescription. See Medical prescription.
  • O.D. is an abbreviation for oculus dexter, Latin for "right eye." (Some eyeglass prescriptions simply say "left" and "right" instead of "O.S." and "O.D.") Oculus means "eye." An eye doctor is sometimes called an "oculist" (although eye doctors themselves usually prefer to use either the term ophthalmogist or optometrist). The Latin word dexter means "right" (as opposed to "left"). The words "dexterity" and "dextrous" derive from this root, because the right hand is usually more skillful than the left.
  • O.S. is an abbreviation for oculus sinister, Latin for "left eye." The Latin word "sinister" means "left," which was once associated with the idea of evil. The "bar sinister" in a medieval heraldry meant that the bearer was of illegitimate descent.
Note: The word ophthalmologist has an "h" after the "p". The first syllable is pronounced "aahf," like the "oph" in "sophomore." It comes from the Greek root "ophthalmos-" meaning "eye;" ophthalmology literally means "the science of eyes." The word optometrist comes from a different Greek root, "opto-," meaning "vision." An optometrist literally means "one who measures vision." In the United States, these are specific terms referring to specific state licensing and courses of professional study. There is considerable overlap in the scope of the two specialties. Optometrists undergo four years of training and have received a doctor of optometry (OD) degree. They are doctors, though not medical doctors, and are licensed to detect, treat, manage, and refer cases of eye disease. Ophthalmologists are medical doctors (MD) who have typically performed an additional three to five years of residency in ophthalmology, and received board certification. The American Academy of Ophthalmology emphasizes the distinction by promoting the phrase "Eye MD" to refer to ophthalmologists. The American Optometric Association characterizes optometrists as "primary eye care providers." Very broadly, ophthalmogists tend to be oriented toward the treatment of eye disease, and optometrists toward the maintenance of optimum vision in healthy eyes.
  • D.V. and N.V. stand for "distant vision" and "near vision" and refer to the different corrections in the upper and lower portions of a bifocal lens. The "N.V." portion of a "single vision" lens prescription will be blank.
  • Spherical, Cylindrical, and Axis will be explained further below. Most eyeglass prescriptions will contain values here. The "spherical" and "cylindrical" columns contain lens strengths in diopters (see below); "axis" contains the direction of the cylinder axis in degrees.
  • Prism and Base are usually blank; they are refer to corrections for errors in eye orientation, such as strabismus.

Blur

Here are some examples of the kind of blurred images that can result from refractive errors; we will be discussing them in more detail below. For now, note that not all kinds of blur are the same.




Lenses

Depending on the optical setup, lenses can act as magnifiers, lenses can introduce blur, and lenses can correct blur. Many people first encounter lenses in the form of magnifying glasses, and think of lenses as magnifiers. Eyeglasses may, in fact, have a small magnifying or reducing effect, but that is an unintentional (and undesirable) side effect. Eyeglasses do not improve vision by magnifying images; they improve vision by reducing blur.

Lens strength

The values given in the "sphere" and "cylinder" columns of an eyeglass prescription are lens strengths in diopters, abbreviated D. The higher the number of diopters, the stronger the lens.

A +10 diopter lens would make a good magnifying glass. Eyeglass lenses are usually much weaker, because eyeglasses do not work by magnifying; they work by correcting focus.

Stacking lenses combines their strength. A +1 diopter lens combined with a +2 diopter lens forms a +3 diopter system.


Lenses come in positive (plus) and negative (minus) strengths. You can usually tell whether a lens is positive or negative by looking through it. Positive lenses tend to enlarge things when you look through them; negative lenses tend to diminish the size of things when you look through them. Because eyeglass lenses are usually weak, they don't enlarge or diminish very much.

Positive eyeglass lenses can concentrate sunlight, like a burning glass. Usually, however, they are much too weak to set fire to anything.


This series of pictures show the shadow cast by a pair of 1 diopter drugstore "reading glasses" outdoors in sunlight as we hold it farther and farther away from a wall. As the distance from the wall increases, the shadow of the frame seems to thicken and the bright area in the center gets smaller and brighter. It slowly changes from being "eyeglass-shaped" to circular.

Negative lenses spread sunlight instead of concentrating it.

A negative lens combined with a positive lens removes some of its strength. A -2 lens combined with a +5 lens forms a +3 diopter system.
A -3 lens stacked on top of a +3 lens looks almost like clear glass, because the combined strength is 0.

In science textbooks, positive lenses are usually diagrammed as convex on both sides; negative lenses are usually diagrammed as concave on both sizes. In a real optical system, you usually get the best optical quality when most rays of light are roughly normal to the lens surface. In the case of an eyeglass lens, this means that the lens should be roughly shaped like a cup with the hollow side toward the eye. So most eyeglass lenses are meniscus in shape.

Spherical lenses and spherical correction

Usually:

  • the "spherical" component is the main correction
  • the "cylindrical" component is "fine tuning."

Depending on the optical setup is, lenses can act as magnifiers, lenses can introduce blur, and lenses can correct blur.

Whatever the setup, spherical lenses act equally in all directions; it magnifies, blur or corrects blur the same amount in every direction.

An ordinary magnifying glass is a kind of spherical lens. When a spherical lens acts as a magnifier, it magnifies equally in all directions. Here, note that the magnified letters are magnified both in height and in width.
Similarly, when a spherical lens puts an optical system out of focus and introduces blur, it blurs equally in all directions:
Here is how this kind of blur looks when viewing an eye chart. This kind of blur involves no astigmatism at all; it is equally blurred in all directions.

Cylindrical lenses and cylindrical correction

Some kinds of magnifying glasses, made specifically for reading wide columns of print, are cylindrical lenses. When a cylindrical lens acts as a magnifier, it magnifies only in one direction. For example, the magnifier shown magnifies letters only in height, not in width.
Similarly, when a cylindrical lens puts an optical system out of focus and introduces blur, it blurs only in one direction.
This is the kind of blur that results from uncorrected astigmatism. The letters are smeared out directionally, as if an artist had rubbed his or her thumb across a charcoal drawing.A cylindrical lens of the right strength can correct this kind of blur. When viewing an eye chart, this is how this kind of blur might appear:
Compare it to the kind of blur that is equally blurred in all directions.

When an eye doctor measures your eye—a procedure known as refraction—usually he or she begins by finding the best spherical correction. If there is astigmatism, the next step is to remove it by adding the right amount of cylindrical correction.

Foo

test test test test test test

File:Specrx-prescription.png File:Specrx-letterssharp.png File:Specrx-blur2.png File:Specrx-1D1D.png

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=User:Dpbsmith/prescription&oldid=2591662"