Jump to content

Isochronous burst transmission

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by RobyWayne (talk | contribs) at 06:16, 3 November 2005 (Bot-assisted manual disambiguation of Network. (You can help!)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Isochronous burst transmission is a method of data transmission. In a data network where the information-bearer channel rate is higher than the input data signaling rate, transmission is performed by interrupting, at controlled intervals, the data stream being transmitted.

Note 1: Isochronous burst transmission enables communication between data terminal equipment (DTE) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE output data signaling rate.

Note 2: The binary digits are transferred at the information-bearer channel rate. The transfer is interrupted at intervals in order to produce the required average data signaling rate.

Note 3: The interruption is always for an integral number of unit intervals.

Note 4: Isochronous burst transmission has particular application where envelopes are being transferred between data circuit terminating equipment (DCE) and only the bytes contained within the envelopes are being transferred between the DCE and the DTE. Synonyms burst isochronous (deprecated), interrupted isochronous transmission.

Source: from Federal Standard 1037C and from MIL-STD-188

Retrieved from "https://en.wikipedia.org/enwiki/w/index.php?title=Isochronous_burst_transmission&oldid=27230902"