Tool steel

Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinct toughness, resistance to abrasion, their ability to hold a cutting edge and/or their resistance to deformation at elevated temperature (red-hardness).

With a carbon content between 0.7 – 1.4% Tool Steels are manufactured under carefully controlled conditions to produce the required quality. In these steels the manganese content is kept low to minimise the possibility of cracking during water quenching.

Tool Steels are made to a number of grades for different applications. Choice of grade depends on whether a keen cutting edge is necessary, as in stamping dies, or whether the tool has to withstand impact loading and service conditions encountered with such hand tools as axes, picks and quarrying implements. The higher carbon grades are used for such applications as stamping dies, metal cutting tools, etc.

A typical composition is:

Carbon (C) 1.0%, Phosphorous (P) 0.04%, Manganese (Mn) 0.3%, Sulphur (S) 0.04%, Silicon (Si) 0.25%

See also