Autobianchi Primula
| Autobianchi Primula | |
|---|---|
 | |
| Overview | |
| Manufacturer | Autobianchi |
| Production | 1964–1970 |
| Designer | Dante Giacosa |
| Body and chassis | |
| Class | Supermini |
| Body style | 2-door fastback 3-door hatchback 4-door fastback 5-door hatchback 2-door coupé |
| Powertrain | |
| Engine | 1221 cc I4 OHV 1197 cc I4 OHV (Berlina) 1438 cc I4 OHV (Coupé) |
| Transmission | 4-speed manual |
| Dimensions | |
| Wheelbase | Template:Auto mm[1] |
| Length | Template:Auto mm (Berlina) Template:Auto mm (Coupé)[1] |
| Width | Template:Auto mm[1] |
| Height | Template:Auto mm (Berlina) Template:Auto mm (Coupé)[1] |
The Autobianchi Primula is a small car (supermini) from the Italian automaker, Autobianchi (a subsidiary of the Fiat Group), built between 1964 and 1970. It was Fiat's first automobile with the front-wheel drive, transverse engine setup, as well as the first Fiat group car with rack and pinion steering.[2] Primulas were built in the Autobianchi factory in Desio[3] and were priced comparably to the Austin/Morris 1100 models built in Italy by Innocenti.[1]
Concept
Before the Primula, all Fiat Group passenger cars were rear-wheel drive—the larger models followed the classic FR layout (front engine powering the rear axle), while small cars were rear-engined. Meanwhile, a practical concept emerged, namely the front-wheel drive layout with the engine mounted transversely, which allowed for very efficient space utilization. First popularized by the Mini[citation needed], it also found its way to other, bigger models, starting with BMC's Austin/Morris 1100.
Fiat's chief designer, Dante Giacosa, recognized the potential of that concept, but the company decided to experiment with it without risking damaging the image of the popular Fiat-branded cars. Thus the Autobianchi Primula emerged—a car marketed under a less crucial nameplate, for which it was an entry into a whole new class of vehicles.[2]
Body styles
The car's original body was similar to the BMC's fastback "saloon" concept, available with two or four doors and with or without the rear hatch (which made the car effectively a hatchback), producing four different combinations, referred to in Italian as "berlina". In 1965, a year after the original launch, the lineup was completed by the addition of a coupé model (effectively a more stylish and spacious 2-door fastback) designed by Carrozzeria Touring.[2][4]
Driveline
Initially, the Primula was fitted with the 1221 cc engine from the Fiat 1100 D (for the coupé it was uprated to 65 hp), but in 1968 it was replaced with Fiat 124 engines—the berlinas received the 1197 cc 60 hp (45 kW) engine from the standard versions, while the coupé was fitted with the more powerful 1438 cc 70 hp (52 kW) unit.[1] All engines used in the Primula had overhead valves (OHV)—the later twin cam derivative of the 1438 cc unit never found its way under the hood of any Autobianchi. The Lancia Beta did use the twin cam, becoming the first transverse engined car to feature a crossflow cylinder head. Unlike contemporaneous BMC and Peugeot models, which had the transmission in the oil sump, the Primula had its manual transmission placed end-on, and the differential below it.[4] The Primula also featured disc brakes on all four wheels, a safety feature uncommon in small cars of the time.[1][4]
The Primula's particular configuration of front wheel drive and transverse engine, but with a gearbox on the end of the engine and unequal length drive shafts, rather than a gearbox in the sump like the Mini, has became universal, as did its use of conventional steel suspension in almost all other cars except Citroens: usually McPherson struts at the front and a "dead" rear axle. The Primula is thus a car design of far greater significance than is often realised, as its design influence spread, far beyond even the mainstream high volume Fiats such as the 127 and the 128 of the late 1960s which used its driveline layout; to every front wheel drive transverse engined car in production today.
Reaction
The Primula was favorably received in the marketplace, and came second in the 1965 European Car of the Year contest, after another front-wheel drive car, the Austin 1800.[5] This convinced Fiat to pursue the concept further. In 1969 the first Fiat with a front-mounted transverse engine, the Fiat 128, was launched, along with two new front-wheel drive Autobianchis—the Autobianchi A112, smaller than Primula, and the larger Autobianchi A111. The 128 secured Fiat the Car of the Year title in 1970, with A112 coming second.[5] Primula production ceased in 1970, by which time 74,858 had been built.[2]
References
- ^ a b c d e f g Auto-Modelle : Katalog - Motor-Presse-Jahres. Vereinigte Motor-Verlage Stuttgart. 1970/71. pp. 24–27. ISSN 0463-6589.
{{cite book}}: Check date values in:|year=(help)CS1 maint: year (link)
(technical data for 1970/71 models) - ^ a b c d "The Autobianchi information site". The Etceterini pages @ CarsFromItaly.com. Retrieved 2006-08-03. (accessed via the Wayback Machine)
- ^ "Storia". Registro Autobianchi. Retrieved 2006-08-04. Template:It icon
- ^ a b c "Autobianchi Primula". Classic hatchbacks - 4Car Feature - from Channel 4. Retrieved 2006-08-03.
- ^ a b "Previous Winners". Car of the Year (official website). Retrieved 2006-08-30. (accessed via the Wayback Machine)
External links
- Contemporary Italian Primula Brochures (Berlina and Coupé) at the Registro Autobianchi site Template:It icon