Jump to content

Nbtstat

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by CorenSearchBot (talk | contribs) at 07:47, 8 October 2009 (Tagging possible copyvio of http://www.computerhope.com/nbtstat.htm). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

DOS command which displays protocol statistics and current TCP/IP connections using NetBIOS over TCP/IP.

Sintax:

NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]

       [-r] [-R] [-RR] [-s] [-S] [interval] ]
 -a   (adapter status) Lists the remote machine's name table given its name
 -A   (Adapter status) Lists the remote machine's name table given its
                       IP address.
 -c   (cache)          Lists NBT's cache of remote [machine] names and their IP
addresses
 -n   (names)          Lists local NetBIOS names.
 -r   (resolved)       Lists names resolved by broadcast and via WINS
 -R   (Reload)         Purges and reloads the remote cache name table
 -S   (Sessions)       Lists sessions table with the destination IP addresses
 -s   (sessions)       Lists sessions table converting destination IP
                       addresses to computer NETBIOS names.
 -RR  (ReleaseRefresh) Sends Name Release packets to WINS and then, starts Refresh
 RemoteName   Remote host machine name.
 IP address   Dotted decimal representation of the IP address.
 interval     Redisplays selected statistics, pausing interval seconds
              between each display. Press Ctrl+C to stop redisplaying
              statistics.